Search found 121 matches
- Sat Oct 03, 2020 4:44 pm
- Forum: Silencer Reviews
- Topic: Gemtech mist
- Replies: 4
- Views: 4467
Re: Gemtech mist
I relocated the scope mount to the barrel and it seems to have helped. Need to put it on paper and see for real.
- Sat Oct 03, 2020 4:40 pm
- Forum: NFA Weapons
- Topic: No DD dealer in this part of the state
- Replies: 8
- Views: 10486
Re: No DD dealer in this part of the state
Snail mailed form 1 M203 took about 4 months.
- Sun Aug 02, 2020 8:37 pm
- Forum: Silencer Talk
- Topic: One can to rule them all, and a bayonet?
- Replies: 3
- Views: 1504
Re: One can to rule them all, and a bayonet?
I was thinking maybe a carbine length gas system on a 16 inch barrel with the barrel lathed to the proper diameter might work I could mock it up if I had an M9 or M7 bayonet. But I dont. If I remember correctly the whole point of a mid length gas system was to locate the bayonet loop onto the bird c...
- Sun Aug 02, 2020 8:29 pm
- Forum: Silencer Talk
- Topic: Accuracy of integral suppressors
- Replies: 9
- Views: 2144
Re: Accuracy of integral suppressors
Yeah the worst 10/22 I ever saw shot a little worse than 5 or 6 moa.
This one is probably like 10.
What's a good way to barrel mount optics on an mist?
This one is probably like 10.
What's a good way to barrel mount optics on an mist?
- Sat Aug 01, 2020 9:47 pm
- Forum: Silencersmithing Forum
- Topic: Offfering Mmachining Services
- Replies: 6
- Views: 3280
Re: Offfering Mmachining Services
What if I wanted to do something like have a tactical innovations fake silencer hogged out for solovent trap k baffels and have an end cap threaded in?
- Sat Aug 01, 2020 9:40 pm
- Forum: Silencer Talk
- Topic: One can to rule them all, and a bayonet?
- Replies: 3
- Views: 1504
Re: One can to rule them all, and a bayonet?
I wouldn't even try it on an AR. I'm sure someone has. I thought about it briefly and the only thing I could come up with is use a mismatched gas system barrel length. So the bayonet fits on the barrel just past the flash hider and doesn't rely on fitting on the A2 bird cage. You may even have to la...
- Sat Aug 01, 2020 9:06 pm
- Forum: Silencer Talk
- Topic: Accuracy of integral suppressors
- Replies: 9
- Views: 2144
Re: Accuracy of integral suppressors
8 to 18lb? Oh hell no. It is between 4 and 5lb. I could get one that you could breath on and would fire, I don't think it would help. I could be doing something wrong. It's a take down. I might try another scope, different way to set up the take down rig, different ammo, ect. I'm used to a 10/22 sho...
- Fri Jul 31, 2020 4:10 pm
- Forum: Silencer Talk
- Topic: Accuracy of integral suppressors
- Replies: 9
- Views: 2144
Re: Accuracy of integral suppressors
I have one, a 10/22 gemtech mist. don't care for it. It's really quiet but accuracy sucks.
The good thing about screwing a silencer on to the end of a gun is you know how accurate it is with out spending all the money on a silencer and tax stamp.
The good thing about screwing a silencer on to the end of a gun is you know how accurate it is with out spending all the money on a silencer and tax stamp.
- Fri Jul 31, 2020 4:00 pm
- Forum: Silencersmithing Forum
- Topic: R8 my 3D printed Form1 design
- Replies: 7
- Views: 3033
Re: R8 my 3D printed Form1 design
Your silencer has a silencer.
Being able to sat that alone is worth the $200.
Being able to sat that alone is worth the $200.
- Fri Jul 31, 2020 3:58 pm
- Forum: Silencersmithing Forum
- Topic: .22 rimfire, integral vs add-a-can
- Replies: 13
- Views: 4245
Re: .22 rimfire, integral vs add-a-can
It's a gemtech mist.
- Fri Jul 24, 2020 11:52 pm
- Forum: Silencersmithing Forum
- Topic: .22 rimfire, integral vs add-a-can
- Replies: 13
- Views: 4245
Re: .22 rimfire, integral vs add-a-can
I'm kind of disappointed with my intergral 10/22.
Yeah its quiet, accuracy isn't very good, it was freaking expensive and now I know I would have a better 10/22 if I went with a 16 inch barrel and decent screw on silencer.
Yeah its quiet, accuracy isn't very good, it was freaking expensive and now I know I would have a better 10/22 if I went with a 16 inch barrel and decent screw on silencer.
- Wed Jul 22, 2020 8:28 pm
- Forum: NFA Weapons
- Topic: No DD dealer in this part of the state
- Replies: 8
- Views: 10486
Re: No DD dealer in this part of the state
I ended up buying an M203 reciever and form 1ing it. It's been in NFA limbo for about 2 moths now.
Buying an M203 reciever and putting it on a form 1 is probably going to be the easiest way to get one for most people.
Buying an M203 reciever and putting it on a form 1 is probably going to be the easiest way to get one for most people.
- Thu Jul 16, 2020 7:09 pm
- Forum: Silencersmithing Forum
- Topic: Form 1 questions
- Replies: 2
- Views: 1645
Re: Form 1 questions
Pistol usually have big blast chamber, one reason is for a recoil booster.
RiflesGo Straight into cones or baffels.
I had a much longer post about titanium versus stainless the bot check deleted it.
RiflesGo Straight into cones or baffels.
I had a much longer post about titanium versus stainless the bot check deleted it.
- Thu Jul 16, 2020 6:51 pm
- Forum: Silencersmithing Forum
- Topic: Qb 22 kit with mouse holes
- Replies: 2
- Views: 1804
Re: Qb 22 kit with mouse holes
I just over bore the first baffels. For example my 22lr and wmr form 1 solvent trap the solvent trap maker called for a 9/32 drill bit if you want to turn it into a silencer. So I drilled out the first 2 cones with 5/16. I read elsewhere that if you drilled all the cones on a solvent trap like mine ...
- Mon Jul 13, 2020 5:58 pm
- Forum: Silencer Talk
- Topic: Solvent traps...
- Replies: 5
- Views: 1879
Re: Solvent traps...
Probably get something that is at least 308 rated with steel end caps and body then drill it out for 22.
- Sat Jul 11, 2020 5:08 pm
- Forum: Silencersmithing Forum
- Topic: First Form 1 Build 6.5 CM
- Replies: 9
- Views: 3999
Re: First Form 1 Build 6.5 CM
Let us know how it goes.
If I make a 6.5cm silencer I will use size D for sure, don't know if I would go with a 10 or a 12.
If I make a 6.5cm silencer I will use size D for sure, don't know if I would go with a 10 or a 12.
- Sat Jul 11, 2020 5:01 pm
- Forum: Silencersmithing Forum
- Topic: Advice plz: 5.56 end cap hole size, engraving location
- Replies: 10
- Views: 7323
Re: Advice plz: 5.56 end cap hole size, engraving location
Quiet bore dot com says their aluminum 30 cal solvent trap has been form 1ed and put on up to 300 win mag.
Don't know how long it will last on 300 mag.
Don't know how long it will last on 300 mag.
- Sat Jul 11, 2020 4:57 pm
- Forum: Silencer Talk
- Topic: Removing lead fouling from aluminum bells
- Replies: 11
- Views: 2035
Re: Removing lead fouling from aluminum bells
Yeah put the grease to it to try and keep the lead off internal surfaces.
- Thu Jul 09, 2020 10:40 pm
- Forum: NFA Weapons
- Topic: Efile Form 1 recently
- Replies: 15
- Views: 7894
Re: Efile Form 1 recently
I just got 2 back with in 2 days of each other. One took right about 30 days, the other took about 25 days.
- Thu Jul 09, 2020 9:53 pm
- Forum: NFA Weapons
- Topic: Form 1 Panzerfaust Project
- Replies: 7
- Views: 4758
Re: Form 1 Panzerfaust Project
If you watch to have some fun post this over on the high road dot org. DDs make the mods really uncomfortable. Ask what people think about re activating an old tank fist and then after they all say how it won't work and is a bad idea you can troll them by showing off the nearly finished product. Do ...
- Thu Jul 09, 2020 9:47 pm
- Forum: Silencersmithing Forum
- Topic: Advice plz: 5.56 end cap hole size, engraving location
- Replies: 10
- Views: 7323
Re: Advice plz: 5.56 end cap hole size, engraving location
I engraved the tube on my cheap chicom 22lr can.
- Tue Jul 07, 2020 3:06 pm
- Forum: Silencersmithing Forum
- Topic: on form 1: 7.62 or 30 cal
- Replies: 6
- Views: 4887
Re: on form 1: 7.62 or 30 cal
I say the simpler the better.
30cal is a nice rounded, even number and simple.
30cal is a nice rounded, even number and simple.
- Tue Jul 07, 2020 1:01 pm
- Forum: Silencersmithing Forum
- Topic: .308, 18" barel uncorking pressure,
- Replies: 2
- Views: 1759
Re: .308, 18" barel uncorking pressure,
It looks like 10,000 to 11,000psi. I have always heard it was 3,000 to 5,000.
11,000psi is pretty intense.
11,000psi is pretty intense.
- Sun Jun 28, 2020 4:01 pm
- Forum: NFA Weapons
- Topic: Form 1 Panzerfaust Project
- Replies: 7
- Views: 4758
Re: Form 1 Panzerfaust Project
Yeah I thought they weren't designed to be reloadable.
That explains why.
That explains why.
- Sun Jun 28, 2020 5:37 am
- Forum: Silencersmithing Forum
- Topic: First Form 1 Build 6.5 CM
- Replies: 9
- Views: 3999
Re: First Form 1 Build 6.5 CM
How long are you going to go on that size D tube?