Search found 11332 matches
- Thu Jul 27, 2017 5:38 pm
- Forum: Silencer Talk
- Topic: O1 FFL repair suppressor?
- Replies: 7
- Views: 2453
Re: O1 FFL repair suppressor?
I am ONLY talking about silencers here and no other firearms. According to the ATF published NFA Handbook....... only an 07/02 can replace silencer parts. "Page176 NFA HANDBOOK" "A person who is licensed under the Gun Control Act (GCA) to manufacture firearms and who has paid the spec...
- Tue Oct 11, 2016 4:06 pm
- Forum: Silencer Talk
- Topic: Non-serviceable suppressor
- Replies: 5
- Views: 4293
Re: Non-serviceable suppressor
It is a Griffin Armament M4SD. It doesn't list material in the specs other than, heat treated, high temp, corrosion resistant alloy. I'm shooting it on a Ruger American bolt action .223, and a 16" AR15. You need to call Griffin and ask them. If they say stainless steel then you can dip it. In ...
- Tue Oct 11, 2016 11:44 am
- Forum: Silencersmithing Forum
- Topic: Wood Baffle Parts Making Need To Be A SOT?
- Replies: 21
- Views: 13544
Re: Wood Baffle Parts Making Need To Be A SOT?
B/c once cut open, they are now each silencer parts needing serialization if they aren't contained as 1 unit. I was guessing based upon previous posts that you and others have made. You are the best Authority on ATF/NFA law here. You are definitely the Go-to Guy for Legal ?s. Hence, my Disclaimer. ...
- Mon Oct 10, 2016 9:14 pm
- Forum: Silencer Talk
- Topic: How many really want a NEW 9mm bolt action carbine?
- Replies: 111
- Views: 28491
Re: How many really want a NEW 9mm bolt action carbine?
I thought you used those, just wanted to be sure.Richard/SIA wrote:Full form threading tool inserts for the lathe.
- Mon Oct 10, 2016 8:35 pm
- Forum: NFA Weapons
- Topic: 458 socom Silencerco Hybrid SBR sanity check
- Replies: 19
- Views: 21137
Re: 458 socom Silencerco Hybrid SBR sanity check
Nickel brass for supers here. Thanks. Then you are all set! When did they start making nicle 458socom brass? I need to get me some! I noticed the nickel on black butterfly ammo at bang it ammo. Haven't started shooting yet, will put this rifle upper together over next month or so. Will start with f...
- Mon Oct 10, 2016 8:05 pm
- Forum: NFA Weapons
- Topic: 458 socom Silencerco Hybrid SBR sanity check
- Replies: 19
- Views: 21137
Re: 458 socom Silencerco Hybrid SBR sanity check
Then you are all set! When did they start making nicle 458socom brass? I need to get me some!CanOfWhooppass wrote:Nickel brass for supers here. Thanks.
- Mon Oct 10, 2016 8:04 pm
- Forum: Silencer Talk
- Topic: How many really want a NEW 9mm bolt action carbine?
- Replies: 111
- Views: 28491
Re: How many really want a NEW 9mm bolt action carbine?
Inserts?Richard/SIA wrote:I did just buy inserts to do 1/2-32 today.
- Mon Oct 10, 2016 6:05 pm
- Forum: NFA Weapons
- Topic: 458 socom Silencerco Hybrid SBR sanity check
- Replies: 19
- Views: 21137
Re: 458 socom Silencerco Hybrid SBR sanity check
Call Silencerco, they will tell you exactly what their product will handle. I started there, I'm not sure it's an official answer, but I was told subsonic would be fine from 10.5". Official min for supers is 16", but what I want to know is if I oops and run a super will it be catastrophic...
- Mon Oct 10, 2016 5:25 pm
- Forum: Silencersmithing Forum
- Topic: Wood Baffle Parts Making Need To Be A SOT?
- Replies: 21
- Views: 13544
Re: Wood Baffle Parts Making Need To Be A SOT?
Have I constructively manufactured a suppressor" if I am in possession of say, a Russet Potato and a gun ( I know many hate the term, but I use it to distinguish a boom-stick, gat, weapon, roscoe, etc. from a suppressor which is also a "firearm", depending on your jurisdiction's defi...
- Mon Oct 10, 2016 4:27 pm
- Forum: Silencer Talk
- Topic: Cheapest way to get accurate lead quantity tests on suppressor residue?
- Replies: 4
- Views: 1243
Re: Cheapest way to get accurate lead quantity tests on suppressor residue?
Only way to get an accurate measurement is to have the lead separated from the carbon and other buildups.
This is not a cheap process and on top of that you are needing it done on 6 different samples.
600 pounds for that is not that bad a price considering.
This is not a cheap process and on top of that you are needing it done on 6 different samples.
600 pounds for that is not that bad a price considering.
- Mon Oct 10, 2016 4:25 pm
- Forum: NFA Weapons
- Topic: 458 socom Silencerco Hybrid SBR sanity check
- Replies: 19
- Views: 21137
Re: 458 socom Silencerco Hybrid SBR sanity check
Call Silencerco, they will tell you exactly what their product will handle.
- Mon Oct 10, 2016 12:30 pm
- Forum: Silencersmithing Forum
- Topic: How about another 50 BMG build
- Replies: 9
- Views: 4220
Re: How about another 50 BMG build
No one else has mentioned your design, so I will. 1- That's a lot of unharnessed blast chamber. You could add a couple of cones just in there. Unless you're intending to use a muzzlebrake, there aren't any obstructions to redirect the gas jet off of Boreline. 2- Instead of scooping the 1st baffle, ...
- Mon Oct 10, 2016 12:23 pm
- Forum: Silencersmithing Forum
- Topic: Wood Baffle Parts Making Need To Be A SOT?
- Replies: 21
- Views: 13544
Re: Wood Baffle Parts Making Need To Be A SOT?
Cutaway silencers even if they are non functional are still classified as silencer. As far as the ATF is concerned they are just really poor performing silencers. If I had a stamp to make a F1 suppressor, and after making the suppressor decided to cut in in half to look at the inside, would I still...
- Mon Oct 10, 2016 12:17 pm
- Forum: Silencersmithing Forum
- Topic: Wood Baffle Parts Making Need To Be A SOT?
- Replies: 21
- Views: 13544
Re: Wood Baffle Parts Making Need To Be A SOT?
Cutaway silencers even if they are non functional are still classified as silencer. As far as the ATF is concerned they are just really poor performing silencers. Curious, asking a serious question; If I had a stamp to make a F1 suppressor, and after making the suppressor decided to cut in in half ...
- Wed Oct 05, 2016 8:51 pm
- Forum: Silencersmithing Forum
- Topic: Wood Baffle Parts Making Need To Be A SOT?
- Replies: 21
- Views: 13544
Re: Wood Baffle Parts Making Need To Be A SOT?
Bender has commented, several times, that cutaways are still silencers. Cut slits in the sides (like an Omega) and no longer serviceable as a "part." (W/o substantial modification. Just like flat washers.) I wonder how the tone would be affected if the baffles were made of wood. LavaRed s...
- Wed Oct 05, 2016 12:15 pm
- Forum: Silencersmithing Forum
- Topic: How about another 50 BMG build
- Replies: 9
- Views: 4220
Re: How about another 50 BMG build
Depends on when the M99 was made, old ones had 3/4-20 and newer ones have 3/4-24. You can call Barrett and they will tell you what you have if you haven't/can't gage the threads yourself.mdfoster wrote: Does anyone know what the muzzle threads are on a M99?
- Tue Oct 04, 2016 2:09 pm
- Forum: Silencer Talk
- Topic: Rebel Silncers
- Replies: 13
- Views: 4686
Re: Rebel Silncers
I saw the YouTube videos, and they seemed pretty quiet - I sent them an email asking about the baffles unscrewing when they heat up, and they claim it's not a problem. As far as why it's so cheap, their explanation is that making a part like that with a CNC mill and aluminum is actually very cheap,...
- Tue Oct 04, 2016 1:46 pm
- Forum: AAC
- Topic: Front Opening Strike
- Replies: 6
- Views: 3505
Re: Front Opening Strike
Yes it is entirely possible for factory ammo to be defective, I have seen many defective rounds over the years.
- Tue Oct 04, 2016 1:41 pm
- Forum: Silencer Talk
- Topic: MPX silencer options?
- Replies: 13
- Views: 8320
Re: MPX silencer options?
We have made/sold fixed mounts in M13.5x1LH for Tridents, Multimounts, Mystics, Tirants, Octanes, Evos and one more but can't recall which one off the top of my head.
Plenty of options out there.
Plenty of options out there.
- Tue Oct 04, 2016 1:37 pm
- Forum: Silencer Talk
- Topic: Sonicboom of Indiana, LLC
- Replies: 1
- Views: 1173
Re: Sonicboom of Indiana, LLC
Has anyone has dealing with this company? Owner's name is R David Fosnight. A friend and I purchased tube kits from him at an Arkansas gun show one month ago - we got the tubes and end caps and were told he had run out of baffles and that the baffles would be sent within one week. Never received I ...
- Tue Oct 04, 2016 1:36 pm
- Forum: Silencersmithing Forum
- Topic: Machining location legality
- Replies: 14
- Views: 2060
Re: Machining location legality
Will you bump into the ATF while transporting your NFA item? Most likely never, but, as stated above, the burden of proof usually lies w/ the accused. Most likely you won't however local cops know how to call the ATF and make a big huge headache for guys not showing the forms to the cops. Remember,...
- Wed Sep 21, 2016 1:45 pm
- Forum: Silencer Talk
- Topic: Jail Breaking.
- Replies: 15
- Views: 3813
Re: Jail Breaking.
Thanks SSGJason!ssgjason wrote:I highly recommend SRI. But, be prepared to wait as turn around can be a bit long. It is worth it though
If we weren't so popular and inundated with custom work, etc..... turnaround would be alot quicker.
- Tue Sep 20, 2016 2:32 pm
- Forum: Silencersmithing Forum
- Topic: form 1 and the new trust rules
- Replies: 15
- Views: 2459
Re: form 1 and the new trust rules
OK found it. "Q: Will new responsible persons, added after the making or transfer, be subject to the same requirements? A: Once an application has been approved, no documentation is required to be submitted to ATF when a new responsible person is added to a trust or legal entity. However, shoul...
- Tue Sep 20, 2016 2:25 pm
- Forum: Silencersmithing Forum
- Topic: form 1 and the new trust rules
- Replies: 15
- Views: 2459
Re: form 1 and the new trust rules
Can you please cite that?crazyelece wrote:The only time you have to notify them is if there is a change while a form is in process.
- Tue Sep 20, 2016 10:10 am
- Forum: NFA Weapons
- Topic: Change of Address While Form 4 Pending
- Replies: 10
- Views: 11069
Re: Change of Address While Form 4 Pending
Been down this road MANY MANY times. You don't LEGALLY own the item until the 4473 is completed. Until that 4473 has been completed the trust only has financial interest in it and ZERO ownership. Until the 4473 is filed a Form4 is basically the permission slip for the SOT to conduct the 4473 transf...