Search found 4120 matches

by Mongo
Thu Apr 27, 2017 10:40 am
Forum: Silencersmithing Forum
Topic: Another K-baffle design
Replies: 12
Views: 4090

Re: Another K-baffle design

There is nothing magical about 60° cones on K baffles. In fact I found the necessarily longer baffles with that cone angle were louder than shorter K baffles with 45° cone angles on both air and rimfire. By a wide margin. The flatter the angle the less strength you will have against collapse. Airgu...
by Mongo
Mon Aug 29, 2016 9:25 am
Forum: Random Talk
Topic: Open a can with no can opener
Replies: 10
Views: 1681

Re: Open a can with no can opener

Not much of a survivalist if you don't carry a can opener of some type.
by Mongo
Tue Aug 16, 2016 8:37 am
Forum: Silencersmithing Forum
Topic: Inconel Baffle Insert
Replies: 14
Views: 3021

Re: Inconel Baffle Insert

Given the thickness of a baffle inversely affects the performance of the baffle I would avoid doing it. Also the weight difference between going with and entire Inconel baffle and a Ti baffle with an insert I would go with the Inconel baffle.
by Mongo
Sat Jul 09, 2016 11:27 am
Forum: News Stories
Topic: Families sued Cinemark over July 2012 Batman shooting--and lost, now they pay
Replies: 5
Views: 633

Re: Families sued Cinemark over July 2012 Batman shooting--and lost, now they pay

I'm sure the lawyers took the case pro bono with the full knowledge that if it was a win they would have made their 40% of a multi million dollar settlement/judgement. They also knew that if they lost they would only be out their own legal expenses and the clients would be on the hook for a large am...
by Mongo
Fri Jul 01, 2016 12:19 am
Forum: NFA Weapons
Topic: Every thing you wanted to know about the Stoner 63a
Replies: 0
Views: 643

Every thing you wanted to know about the Stoner 63a

This video took way longer than I expected it to but when you start with the Stoner 63A as a subject well it gets quickly out of hand.

https://youtu.be/-Q3eb0zbBP0
by Mongo
Sun Feb 14, 2016 1:33 am
Forum: Random Talk
Topic: "The Expanse" If you like SciFi
Replies: 8
Views: 9488

Re: "The Expanse" If you like SciFi

I have them on DVR. I have not watched them yet since I seem to have to get in the mood to watch TV which seems pretty rare for me these days. On top of that I have a good back log of scifi books I am reading with a bunch of new authors that I am enjoying.
by Mongo
Tue Jan 19, 2016 9:54 am
Forum: Silencersmithing Forum
Topic: 101
Replies: 2
Views: 509

Re: 101

This is what you seek, never got around to updating it or even correcting the spelling and grammar errors but you will get the idea.

viewtopic.php?f=10&t=63889
by Mongo
Wed Dec 09, 2015 10:21 am
Forum: NFA Weapons
Topic: Stoner 63a technical questions
Replies: 49
Views: 10377

Re: Stoner 63a technical questions

I eventually will get more pictures done but it will take a while. Comcast scragged all webpages so mine died but will be rebuilt much better with better pictures and videos.
by Mongo
Tue Dec 08, 2015 4:02 pm
Forum: NFA Weapons
Topic: Stoner 63a technical questions
Replies: 49
Views: 10377

Re: Stoner 63a technical questions

gunny50 wrote:
Mongo wrote:There you go, they are too big to post them here.

http://weaponblueprints.com/mongo/pictures/
Mongo fantastic images, do like the spare barrel Bag, is that original as well?

Gunny
Yes its an original spare barrel bag and I avoid using it like the plague since its asbestos lined.
by Mongo
Tue Dec 08, 2015 12:50 pm
Forum: NFA Weapons
Topic: Stoner 63a technical questions
Replies: 49
Views: 10377

Re: Stoner 63a technical questions

There you go, they are too big to post them here.

http://weaponblueprints.com/mongo/pictures/
by Mongo
Sun Sep 06, 2015 10:30 am
Forum: Silencer Talk
Topic: LaRue Tactical Tranquilo
Replies: 10
Views: 3137

Re: LaRue Tactical Tranquilo

damn it, I was trying to get the link fixed and killed my post. Just read the thread and you will see.

The thread on the can

http://www.ar15.com/forums/t_1_5/178433 ... tml&page=1
by Mongo
Thu Sep 03, 2015 11:02 pm
Forum: Silencer Talk
Topic: Remote rifle
Replies: 5
Views: 540

Re: Remote rifle

Might want to be real careful because according to ATF you are approaching the easily converted to full auto by using a semi auto rifle with electronic triggering. All that it would take is a simple pulse modulator on the trigger servo and it would be a machine gun. No machining required.
by Mongo
Thu Aug 06, 2015 8:53 am
Forum: Legal and Political
Topic: Ebay sellers gone full on nuts.
Replies: 51
Views: 9729

Re: Ebay sellers gone full on nuts.

doubloon wrote:Hmmm ... I think I'm going to start a line of suppressor covers printed in an oil filter parody theme.

:lol: :lol: :lol: are you going to make them in FRAM orange? :lol: :lol: :lol: :lol:
by Mongo
Thu Aug 06, 2015 8:43 am
Forum: Silencer Talk
Topic: SHOT SHOW 2015 5.56 Suppressed Bolt Carrier
Replies: 12
Views: 1815

Re: SHOT SHOW 2015 5.56 Suppressed Bolt Carrier

Looking at the machining on the bolt carrier is should be lighter not heavier unless the tail is solid. The slight fluting and diameter reduction will decrease weight. It looks to me like they are limiting the amount of gas that gets to the piston via throttling the gas at a valve in the carrier. I ...
by Mongo
Thu Aug 06, 2015 8:32 am
Forum: Silencer Talk
Topic: reason for commercial cans to be same outside diameter?
Replies: 26
Views: 1642

Re: reason for commercial cans to be same outside diameter?

standard seamless tubing sizes.
by Mongo
Thu Mar 19, 2015 9:19 am
Forum: Silencer Talk
Topic: Do Digital Sound Meters meet testing requirements?
Replies: 26
Views: 2881

Re: Do Digital Sound Meters meet testing requirements?

I always wondered about designing suppressor muzzles to spoof the mil std test into yielding lower numbers by directionally controlling the sound impulse. You could make a suppressor sound quieter in testing yet actually be much louder to down range observers. I guess it comes down determining the g...
by Mongo
Thu Jan 15, 2015 12:19 pm
Forum: Nutcase bitch and whine forum
Topic: This site is getting on my nerves
Replies: 4
Views: 3277

Re: This site is getting on my nerves

Every time I push the "my post" link or the "new post link" I get "array" for an answer and the it will not do their function. This also happens with the search feature. When I bring up this board and neither of those work I just leave and this is why I don't bother to surf or post here most of the ...
by Mongo
Fri Dec 05, 2014 11:01 am
Forum: Silencersmithing Forum
Topic: Does baffle thickness have an effect
Replies: 6
Views: 1106

Re: Does baffle thickness have an effect

Yes it can make a huge effect on the baffle's performance. Edge effects of thin vs thick orifices are well known and understood in fluid dynamics. Thinner the plate in an orifice the larger the pressure drop across it. Suppressors main mechanic of operation is pressure drop across baffles thus inhi...
by Mongo
Fri Dec 05, 2014 10:51 am
Forum: Silencersmithing Forum
Topic: spacer thickness
Replies: 12
Views: 1722

Re: spacer thickness

I would stay away from aluminum for spacers in a centerfire rifle suppressor. Another issue that you need to account for when designing a suppressor is thermal expansion. If you are using a stainless steel outer tube and aluminum tubing spacers the spacers will grow in length more rapidly than the s...
by Mongo
Fri Dec 05, 2014 10:34 am
Forum: Silencersmithing Forum
Topic: Does baffle thickness have an effect
Replies: 6
Views: 1106

Re: Does baffle thickness have an effect

Yes it can make a huge effect on the baffle's performance. Edge effects of thin vs thick orifices are well known and understood in fluid dynamics. Thinner the plate in an orifice the larger the pressure drop across it. Suppressors main mechanic of operation is pressure drop across baffles thus inhib...
by Mongo
Tue May 27, 2014 10:59 am
Forum: NFA Weapons
Topic: Stoner 63a technical questions
Replies: 49
Views: 10377

Re: Stoner 63a technical questions

no, I will PM u with a different e-mail address to use.
by Mongo
Sun May 25, 2014 4:45 pm
Forum: NFA Weapons
Topic: Stoner 63a technical questions
Replies: 49
Views: 10377

Re: Stoner 63a technical questions

I would like to see high res pictures of all the parts and guns if possible. You can e-mail them to me if you need to at supermongo@soon.com Mongo, I emailed you about the fact that I might get some info on the Stoner 63 and XM models I will be taking HR pictures of all parts and features for sure....
by Mongo
Sat May 24, 2014 3:42 pm
Forum: NFA Weapons
Topic: Stoner 63a technical questions
Replies: 49
Views: 10377

Re: Stoner 63a technical questions

I would like to see high res pictures of all the parts and guns if possible. You can e-mail them to me if you need to at supermongo@soon.com
by Mongo
Sat Apr 19, 2014 6:28 pm
Forum: AAC
Topic: AAC picture thread...
Replies: 680
Views: 193332

Re: AAC picture thread...

Final build pictures, still need to get need glass for it but this will have to do for now. Tmix did the gunsmith work except for the barrel dimpling. .308/7.62X51 Barrel SS 16.5" 1-10 twist Suppressor AAC Mk13-SD w/ 80 tooth brake mount Leupold Mk4 10x scope Badger 20 moa base and rings AICS 1.5 St...
by Mongo
Wed Apr 02, 2014 7:45 pm
Forum: Random Talk
Topic: Desk top wall paper
Replies: 2
Views: 431

Desk top wall paper

I'm always looking for new NFA related desktop wall paper and decided to make some for myself since most is either too busy and end up hiding my icons or just too bright. I also get so damn many request for the drawings that I use for my back ground images on my website so I thought I'd give this ou...