There is nothing magical about 60° cones on K baffles. In fact I found the necessarily longer baffles with that cone angle were louder than shorter K baffles with 45° cone angles on both air and rimfire. By a wide margin. The flatter the angle the less strength you will have against collapse. Airgu...

Not much of a survivalist if you don't carry a can opener of some type.

Given the thickness of a baffle inversely affects the performance of the baffle I would avoid doing it. Also the weight difference between going with and entire Inconel baffle and a Ti baffle with an insert I would go with the Inconel baffle.

I'm sure the lawyers took the case pro bono with the full knowledge that if it was a win they would have made their 40% of a multi million dollar settlement/judgement. They also knew that if they lost they would only be out their own legal expenses and the clients would be on the hook for a large am...

This video took way longer than I expected it to but when you start with the Stoner 63A as a subject well it gets quickly out of hand.

https://youtu.be/-Q3eb0zbBP0

I have them on DVR. I have not watched them yet since I seem to have to get in the mood to watch TV which seems pretty rare for me these days. On top of that I have a good back log of scifi books I am reading with a bunch of new authors that I am enjoying.

This is what you seek, never got around to updating it or even correcting the spelling and grammar errors but you will get the idea.

viewtopic.php?f=10&t=63889

I eventually will get more pictures done but it will take a while. Comcast scragged all webpages so mine died but will be rebuilt much better with better pictures and videos.

gunny50 wrote:

Mongo wrote:There you go, they are too big to post them here.

http://weaponblueprints.com/mongo/pictures/

Mongo fantastic images, do like the spare barrel Bag, is that original as well?

Gunny

Yes its an original spare barrel bag and I avoid using it like the plague since its asbestos lined.

There you go, they are too big to post them here.

http://weaponblueprints.com/mongo/pictures/

damn it, I was trying to get the link fixed and killed my post. Just read the thread and you will see.

The thread on the can

http://www.ar15.com/forums/t_1_5/178433 ... tml&page=1

Might want to be real careful because according to ATF you are approaching the easily converted to full auto by using a semi auto rifle with electronic triggering. All that it would take is a simple pulse modulator on the trigger servo and it would be a machine gun. No machining required.

doubloon wrote:Hmmm ... I think I'm going to start a line of suppressor covers printed in an oil filter parody theme.

are you going to make them in FRAM orange?

Looking at the machining on the bolt carrier is should be lighter not heavier unless the tail is solid. The slight fluting and diameter reduction will decrease weight. It looks to me like they are limiting the amount of gas that gets to the piston via throttling the gas at a valve in the carrier. I ...

standard seamless tubing sizes.

I always wondered about designing suppressor muzzles to spoof the mil std test into yielding lower numbers by directionally controlling the sound impulse. You could make a suppressor sound quieter in testing yet actually be much louder to down range observers. I guess it comes down determining the g...

Every time I push the "my post" link or the "new post link" I get "array" for an answer and the it will not do their function. This also happens with the search feature. When I bring up this board and neither of those work I just leave and this is why I don't bother to ...

Looking at the design of the locking lugs I suggest scrapping the door and get one designed by professionals. It looks like that design of the locking bar is s--t at best from your picture. If the lugs are independent like shown in your picture plus given that they are at variety of angles that do n...

Yes it can make a huge effect on the baffle's performance. Edge effects of thin vs thick orifices are well known and understood in fluid dynamics. Thinner the plate in an orifice the larger the pressure drop across it. Suppressors main mechanic of operation is pressure drop across baffles thus inhi...

I would stay away from aluminum for spacers in a centerfire rifle suppressor. Another issue that you need to account for when designing a suppressor is thermal expansion. If you are using a stainless steel outer tube and aluminum tubing spacers the spacers will grow in length more rapidly than the s...

Yes it can make a huge effect on the baffle's performance. Edge effects of thin vs thick orifices are well known and understood in fluid dynamics. Thinner the plate in an orifice the larger the pressure drop across it. Suppressors main mechanic of operation is pressure drop across baffles thus inhib...

no, I will PM u with a different e-mail address to use.

I would like to see high res pictures of all the parts and guns if possible. You can e-mail them to me if you need to at supermongo@soon.com Mongo, I emailed you about the fact that I might get some info on the Stoner 63 and XM models I will be taking HR pictures of all parts and features for sure....

I would like to see high res pictures of all the parts and guns if possible. You can e-mail them to me if you need to at [email protected]

Final build pictures, still need to get need glass for it but this will have to do for now. Tmix did the gunsmith work except for the barrel dimpling. .308/7.62X51 Barrel SS 16.5" 1-10 twist Suppressor AAC Mk13-SD w/ 80 tooth brake mount Leupold Mk4 10x scope Badger 20 moa base and rings AICS 1...