Hey Girls, I just noticed a deal at my local fun shop, on a Beretta CX4 storm carbine in .40s&w…. (LEO turn in for 500 Frogbacks!), I have never been a .40 fan….but now that they are outta favor…. I kinda love a hard luck case….i have access to a Dillon press and .40 dies, and a .45 octane can…....

I ended up buying a YHM R9….should be good for subs and supers… may not be the hottest can on the market…. But will cover all the bases!

Thanks!
Fred

Hey Guys, I have been hunting online…. And not finding a ton of information on the 350 legend…. I put an AR in 350 together…. And have been shooting mostly subs through it…. From what I have been able to Find is that subs are around 25k PSI and supers are around 55k PSI…. So I am guessing subs are g...

Here is a Pic. I found of the AP-5mt…. This is what I wanna do to my “m”!

Hey Guys, This is a dumb question, that I have asked elsewhere and so far I’m stumped….. I bought one of those Cheap assed PSA AP5m’s (Century MP5k made in Turkey by MKE), and I have been very happy with it, and even sprung for the binary trigger, which is about as much fun as you can have this side...

Hey Guys! Thanks for the reply……I think I do have one of those old “Federal Ordinance” Makarov barrel jigs…. If I dig deep enough In the black reaches of my parts bins… I have both a PP barrel and a PPK/s barrel….. my plan is to send in them both to a good ‘smith, let him decide which one would work...

Hey Troops, I haven’t posted on here in a while…. But I got a question / problem…. And figure this is the best place to ask. I have a Manurhin Walther PP and a walther PPK/S slide that I would like to make suppressor friendly…. (I understand that as a blow back gun… it won’t be as effective as a loc...

I think the omega looks good with the Deadair mount..... But it does add 1/4-1/2" to over all length Compared to the ASR.... https://imagizer.imageshack.com/v2/150x100q90/924/FNHGeA.jpg https://imagizer.imageshack.com/v2/150x100q90/924/Wz5fUe.jpg https://imagizer.imageshack.com/v2/150x100q90/92...

Thanks Guys!

I got my Deadair mounts in today.... So not a problem...... All my issues are solved!

Thanks!
Fred

Hey Troops, Dumb question time! I bought a used Seekins handguard, thinking it was a 12".... Measure twice cut once, huh? It is actually 12.5", when my Omega is mounted with the direct thread mount the end of the suppressor is slightly recessed within the handguard.... Do you think the muz...

I'm doing an end run around the issue untill my Deadair gets out of jail..... I am going to convert my Silencerco Omega to the Deadair mount system....(I was never crazy about the Silencerco ASR mount anyway!) it is a little pricy.... But being able to switch can to can from host to host makes sens...

Yeah, I guess I will cool my jets..... But it would be an interesting project/business for someone to Make fake cans that worked with the mounts of the most popular cans.... I'm doing an end run around the issue untill my Deadair gets out of jail..... I am going to convert my Silencerco Omega to the...

Hey Guys, I am not sure if this is a hair brained d thought or if it has been considered before..... But..... I just sent the paperwork away on a New Sandman S, which I plan on using on a 300 blackout AR pistol and on a 5.56 AR pistol..... Here is my question..... I'm running the can under Seekins h...

Ok the proverbial women of Ill repute..... In a house of worship.... https://www.ebay.com/itm/6-5-inch-308-Muzzle-Brake-5-8x24-TPI-7075-Aluminum-with-Multiport-Black/263890866708?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D1%26asc%3D20131003132420%26meid%3D86e2e8b8d37d4c409d2c91151140088d%26pid%3D...

Hey Guys..... I guess I only have a half formed idea of what I am thinking about..... And have yet to put pen to paper.... I guess I'm thinking a tube slightly larger diameter then the suppressor tube, screwed into the barrel bushing, and extending around the ported barrel for a nominal length 6&quo...

Hey Guys.... Here is an odd idea I had..... I have posted before.... That I really want a AR-15 in 9mm Upper that uses the MP-5SD system.... I know it is possible.... And machining a 9mm AR barrel, And porting it to use a SD suppressor would not be that hard.... Just time, skill, and money could mak...

Hey Guys, From the odd gun catagory, up for sale is a Wather P-5....(neat gun.... Ejection port is on the left side!), I bought this gun used, but was told it was a German police gun. I found a spare barrel for it.... (Not cheap!), and had Mike from Tornado Tech extend and tread the barrel to 1/2x28...

Hey Guys, I got this as part of a trade deal.... It is a Wilson Combat, whisper, muzzle brake/Suppressor mount in good used condition. It was blind pinned, to make a 14.5" Barrel legal. The pin was drilled out in order to remove it, so I could install a Silencerco Omega Brake. It is in good usa...

Deal done.... But I do have a spare 7.62-5/8x24 flash hider to trade if anyone is interested.


Note: I did get my free fight th noise tee-shirt from Silncerco...... And as a bonus they were nice enough to include a free 7.62 flash hider!

If it is free..... It is for me!!!

Thanks!
Fred

Hey Guys, I got this flash hider as part of a trade.... It has some. Minor tool marks, but otherwise looks new. Price: $70 shipped in the lower 48 I am pretty sure it is this one.... But can provide pics. On request. http://www.silencershop.com/accessories/flash-hiders/aac-51t-blackout-flash-hider.h...

Hey Guys, I just picked up my Silencerco Omega, (was in suppressor jail for 130 days!) I have an extra 30 Cal muzzle brake, and Flash hider. I need an extra muzzle brake, or flash hider in 5.56 (1/2x28). I am purposing a straight swap..... My 7.62 muzzle brake or flash hider (your choice), for your ...

Hey SRI,

Thanks for the info. buddy! Do you offer a 3 lug mount for the Trident9, if so what to you charge for one? While I am at it... I may just have to get in touch, to have my Trident9 Jail broke!

Thanks!
Fred

Hey Guys, I am thinking of SBRing a MP-5 clone, and would like to use my Trident 9 on it, since SWR has faded out..... I am told that some Gemtech three lug adapters and booster will work.... On several types of cans.... Including my SWR, Anyone have any first hand info. On the subject? I'm told thi...

Hey Guys, I hope I haven't used up my allotment of dumb questions??? Here we go.... I already have a Walther PP barrel, and want to use it in a PPK in 7.62mm (.32 ACP ) my Trident 9 is 1/2x28, so I guess I would need threading and an adapter. Has anyone done this, and would it be worth the expense? ...

Hey Guys, I just had a great experience... and thought I would post up in the name of posterity! I sent my bushingless 1911 barrel (and slide!) into ADCO who threaded my barrel with a 1/2 x 28 insert.... for $165 total including return shipping.... I had it back in my greedy paws in under a week.......