Hi, I plan to make a new can for my Remington 700 SPS chamber in .308 win but I don't have an experience in making a can for centerfire rifle. Could you please suggest some idea for me? Diameter : 1.5" Wall thick : .065" Length : 8" Material : SS 304 Baffle Design : (Cone or Monocore)...

Yep due to the performance of their reduction from suppressor. Easily to end up with headshot within 50-100 yards by training shooter.

How about the cost of 7078 when comparing with 7075-T6?


How about the POI?

Capt. Link. wrote:I like your design my question is why not use a coaxial gas chamber instead of the spacers you have planned.

I don't know how to draw it and explain to the local lathe smith for done the work. So, just want easy design for them.

Here is my new CMMG .22LR 6.5" SBR.



Tactical Innovation Fake Can (1.25" OD x 5" Length) within Daniel Defense M4 7.0 Handguard

The dimension would be 1.25" OD x 5.5" Length http://i632.photobucket.com/albums/uu49/golf_1911/New%20Omega%20Cage%20Baffle/FullParts-SideView.jpg http://i632.photobucket.com/albums/uu49/golf_1911/New%20Omega%20Cage%20Baffle/FullParts-HalfView.jpg http://i632.photobucket.com/albums/uu49/go...

I just got the new AR15 Dedicated .22LR upper with 6.5" Barrel from CMMG. So, I'm planning to make a new can with 1.25" OD for this .22LR SBR. The nominal 1" OD will not look better when install to this .22LR SBR because I use Daniel Defense M4 7.0" Handguard. Then the suppressor...

Hi, I’m not going to enter into the SS vs. “Alien” battle once more. Can you afford MonoCores ?, 3-Axis CNC Mill by chance ? If so, I’m willing to Post a new design (brand new, just few days old …) for you. Mixes Alu-6061/T6 (Core and Caps) and SS-304L (Tube from OnlineMetals.com), 1.5x7. Best, Pau...

Your lathe work for cap and brake are awesome.


How hard to machine 17-4 when comparing with 304 or 316?

The step inside of cone may not affect as much as outside step.

How about Aluminum 7075-T6?

Just want the light weight .223 Can instead of Heavier .223 Can from SS or Steel.


For Baffle design does not conclude. So, may change to Cone Baffle by SS304.

Will the Aluminum 6061-T6 Round Tube with .065" wall strong enough to making Outer tube for .223 Can?

Can dimension would be 1.5" x 7" Long and use baffle design like Tac16.

Nice picture Paul.

What program that you use to draw?

Awesome design & work!!!

Have you test it?

I like your design.

Pic look cool!

How about 147gr LRN?

How about using Hornady 55gr V-Max instead of Hornady 55gr FMJ?


Will they give the same result?

Could you post some idea for other component like

Bullet
Brass
Powder & Charger
Primer
OAL

My Rifle was AR-15.
1:7 Twist
16" Lenght
Gas Operation


I don't care about not cycle during subsonic ammo.

Hi, Could anyone suggest some guideline information to reloading a subsonic in .223 Remington caliber? Bullet : Brass : Primer : Powder & Charge : OAL : As I found on website most people always recommend to use Magnum Prime instead of Normal Primer to help about ignition but those recommend were...

Tom,

Nice can. Have you test it?

nice

How about the OD of Tube? Should I increase from 1.25" to 1.5"? If the weight and size are still acceptable I would try to. An almost 20% increase in volume is huge. With my design of 1.25" OD and Lenght 6.3", the program calculate total weight around 400 Grams. (Material is SS ...

11 Degree Target Crown First off, you don't have to post 3Ds of every single part. I know it's fun, but the first cut-through describes the design with plenty detail. Anything more just confuses the issue. Secondly, an 11° endcap is pretty pointless. Even in the benchrest-crowd the perfect crown an...

On #1 I think the baffles will be too close together at 6.3" length. They show only 5/16" between each other is too tight IMO. I'd go for at least 1/2". I would eliminate that the space you have at the end of it and move that last baffle all the way to the end. Take a look at this. Y...