http://youtu.be/qTRcX6O5p94 Link shows a video of FEMUR in action, Shooter to Right has FEMUR on a 6.8 AR15. Shooter making video has a FEMUR on 5.56 AR15. FEMUR is rated to 300WM. 10 oz. Comes with a 1/2x28 thread adapter for AR15 use. Perfect field suppressor where you will be shooting offhand an...

If it is for a commercial buffer tube, I will take it.

Our new Multi Purpose Suppressor does just what you are asking and was designed to fit many calibers using a vast array of endcaps and thread adapters. Here are the specs: 7" 1.5" diameter 10 oz. 300wm rating Fully tig welded titanium with a threaded rear that accepts our thread adapted en...

look at hooper ordinance and liberty also. Thanks. Our FEMUR Multi-Purpose .30 cal suppressor is rated to 300WM and is perfect on the 300BLK. It adds 6.5" to the OAL, is 10 oz., offers minimal if any POI shift, and comes with an AR15 adapter. oh, and it has a Lifetime warranty. It is my favori...

expect to drop them on the lathe bed often. Once you get used to them, you will appreciate what I have typed here. You can loosely tape one end of them together, stops you having to juggle with seprate wires What I like about wires is the fluid of movement. I place the wires on the threads and appl...

Do not overlook tool tip wear and the slight increase in OD after threading. Two often overlooked variables that will leave you scratching your head when the Thread protector or ring gauge refuses to go on. Have confidence in your measurement and troubleshoot from there. Do not keep cutting deeper t...

Stop wasting ammo, rebuild the suppressor lighter.

Plenty of manufacturers making 20-25 oz. 338 suppressors.

If the rifle shoots fine until the suppressor variable is added, most likely not the rings. If the POI shift starts to change after a few suppressed shots, I suggest you fire another group after a cool down. Sometimes barrel harmonics take a few shots to become consistent. If you still get a varying...

I hope that steady rest is motorized.

Size the blast chamber properly to suit the best sound/ back pressure. If you are trying to meet the length without shortening the suppressor, add the extra length on the opposite end with a spacer or odd length baffle.

Something is moving. Either the attachment or the baffles... Or... How is the first blast baffle constructed and how far is it from the muzzle? What is the ID of the tube and what are the OD of the baffles?(baffle to tube clearance is what I am after) Aperture hole diameter? Is the suppressor should...

.020" for brakes .050" for suppressors You need to account for tube to baffle clearances. If you press the baffles in the tube you can tighten up on the aperture hole. However, baffle construction is more important than aperture hole clearance when pressure and sound are concerned. Our .30...

He didn't make a K baffle. He made an AL Baffle (Alabama fan shot glass). It baffles those guys when they can't get drunk. (War Eagle) http://pic100.picturetrail.com/VOL760/2847831/8062819/403929041.jpg http://pic100.picturetrail.com/VOL760/2847831/8062819/403929024.jpg http://pic100.picturetrail.c...

I like it when the baffle Police come out. Save us...

The word Assumption starts with the word Ass for a reason.

That is NOT a way to thread a barrel that i would reccomend! Even if it is for a muzzle brake the customer might put on a can later. Have experienced some 700 barrels throw out 0.02" on the OD and that is plenty enough for a baffle strike. But HOW accurate does it really need to be? There is p...

delta9mda wrote:hoop, about those baffle pics

Might not be the best idea. Buy one and cut it open.

Titanium all day. Love it. Blast chamber looks a little large Think more gas diversion.... A bullet/gas pressure entering a suppressor is kinda like a fat woman trying to fart in a jug. There has to be a place for the gas to go besides one chamber. All you have there is one chamber with vents from t...

Found any ticks on your body lately?

Guys, Here is a great video on how NOT to thread a barrel. This is such a hack job on so many different level I wouldn't even know where to begin! :( http://www.youtube.com/watch?v=KNnMxRnlFMM&feature=share&list=UUlIkF9Vn6rfWTBi74ZPnunA Well, it is not good. At least he single point threade...

All good choices here. However our FEMUR MULTI-PURPOSE .30 cal is another fine option. I would not engrave my name on anything but top tier. 10 oz. 300 win mag rated designed for minimal POI shift 7" long On 16" 5.56 AR15 in side by side tests in various field conditions, it has outperform...

I would go with the SDN6 personally, we deal with too many GemTech problems and the most recent battery of problems is broken or crappy welds on the Sandstorms/Quicksands. I spoke with Dater about that issue. First they robot welded them as they would the SS cans they make like the M4-02. Soon real...

The FEMUR Multi Purpose 7" .30 cal has proven to be great on all sub calibers as well. Had them on everything from .308 Win, 6.5 Grendel, 5.56, 300BLK, and .22lr.. Even with the FEMUR being a .30 cal suppressor, you cannot distinguish it from dedicated 5.56 suppressors when fired on a 5.56 rifl...

yellowfin wrote:That's very true, I am thinking of a QD mount instead of thread mount b/c I'll want to share the can between several rifles.

The direct thread on/adapter is the best option for many reasons. The biggest being repeatable zero if you take the suppressor off.

Guys, I apologize for a late reply. Work has been kicking my tail. I appreciate your input more than you know. After looking at thread specs on the Yankee Hill website, I'm leaning toward threading the muzzle 5/8-24 and index off the muzzle instead of a shoulder. MarkM, which AAC mounts are you tal...

On permit one night hunting hogs checking my zero @ 80 yds. Entry was between the eyes.

77gr Black hills
Aimpoint
PVS14
Hooper Ordnance FEMUR Suppressor