Search found 182 matches

by Hatchetjoe
Tue Aug 04, 2020 10:27 am
Forum: Silencersmithing Forum
Topic: Need To Critique This Design
Replies: 8
Views: 1071

Re: Need To Critique This Design

The big blast chamber will likely keep backpressure down if running on a gas gun, however this will sacrifice some in the way of FRP. The distal chamber could use a snorkel on the end cap but it is a bit large. The baffles are far apart could use tighter spacing and more baffles. Not sure what the a...
by Hatchetjoe
Sat Jul 04, 2020 3:58 pm
Forum: Silencersmithing Forum
Topic: Volume vs performance
Replies: 5
Views: 644

Re: Volume vs performance

I used to run an AWC MKII on an MP 5, it was so quiet at first I had to double check to find out if the gun worked at all. That can was 2"x12" , and it had shaped fender washers inside, and coaxial tubes. I wish I still had it. Yes size matter as it gives volume.
by Hatchetjoe
Sun Jun 14, 2020 11:22 am
Forum: Silencersmithing Forum
Topic: Form 1 design for an FN1900 in .32 ACP
Replies: 10
Views: 536

Re: Form 1 design for an FN1900 in .32 ACP

A bore of .375" would be fine, the cutouts at the front of the K baffle will be detrimental to sound. The blast chamber is probably twice the length it needs to be and will increase FRP. Don't eliminate the blast chamber completely as that may cause lots of port noise on a blow back. I can't tell fo...
by Hatchetjoe
Tue Sep 03, 2019 3:02 pm
Forum: Silencer Talk
Topic: quietest 9mm pistol can
Replies: 1
Views: 939

Re: quietest 9mm pistol can

The AAC Tirant
by Hatchetjoe
Sat Sep 29, 2018 10:44 am
Forum: Silencersmithing Forum
Topic: Have approved Form in hand, but cannot find sources.
Replies: 16
Views: 2012

Re: Have approved Form in hand, but cannot find sources.

He does have all of 2 posts so troll may be a proper assessment
by Hatchetjoe
Mon Jul 23, 2018 7:17 pm
Forum: Silencer Talk
Topic: Have you tried this ammo? (Winchester Super Suppressed)
Replies: 8
Views: 1544

Re: Have you tried this ammo? (Winchester Super Suppressed)

Instead of reloading I wait until there is a great deal and buy a truckload. Currently working thru 10K rounds of the fiocchi 158gr I bought 18 Months ago. Great stuff.
by Hatchetjoe
Sun Mar 25, 2018 11:52 am
Forum: Silencersmithing Forum
Topic: Can't belive I just bought a Welrod !
Replies: 20
Views: 5687

Re: Can't belive I just bought a Welrod !

Enjoy your new acquisition.
by Hatchetjoe
Sun Feb 18, 2018 12:36 am
Forum: Silencersmithing Forum
Topic: Hard chrome plating baffles for abrasion resistance at home
Replies: 39
Views: 5127

Re: Hard chrome plating baffles for abrasion resistance at home

If chrome plating had advantages some mainline MFGs would be offering it by now.
by Hatchetjoe
Tue Jul 04, 2017 3:55 pm
Forum: Silencersmithing Forum
Topic: New Baffle Design
Replies: 40
Views: 8994

Re: New Baffle Design

I call it, the John Can number 1. :lol: And for an even shittier design, stay tuned for the John Can number 2. A Co2 cooled suppressor was built for the MAC-10 years ago so "gas" comes before John's #2 -CL I heard about this co2 suppressor but never read any reports or saw any pictures of one. I as...
by Hatchetjoe
Sat May 27, 2017 9:36 am
Forum: Silencer Reviews
Topic: AAC Halcyon????
Replies: 3
Views: 3426

AAC Halcyon????

Did anyone get their hands on one? I've been looking for a review.
by Hatchetjoe
Tue Apr 25, 2017 9:29 am
Forum: Silencersmithing Forum
Topic: Another K-baffle design
Replies: 12
Views: 5954

Re: Another K-baffle design

I'm not sure if it's supposed to be that way however the cone angle on those baffles seems to not be anywhere near 60 degrees. Are air rifles different?
by Hatchetjoe
Tue Jan 24, 2017 3:03 pm
Forum: Silencersmithing Forum
Topic: Ceiner/Ruger Mk2 disassembly
Replies: 6
Views: 1133

Re: Ceiner/Ruger Mk2 disassembly

Stand the tube upright, pour some Kroil into the inner tube let it sit until some Kroil comes out of the seam, after that try the wrench again.
by Hatchetjoe
Sat Dec 10, 2016 1:25 pm
Forum: Silencersmithing Forum
Topic: New Baffle Design
Replies: 40
Views: 8994

Re: New Baffle Design

I can't wait to see this drawn up.
by Hatchetjoe
Fri Oct 07, 2016 5:49 am
Forum: Silencersmithing Forum
Topic: 300 blk coaxial build almost done -- Range Report.
Replies: 31
Views: 5415

Re: 300 blk coaxial build almost done

This looks pretty heavy duty, I'm guessing a short bbl and lots of full auto?
by Hatchetjoe
Thu Sep 15, 2016 4:11 pm
Forum: Silencersmithing Forum
Topic: Clipping design idea.
Replies: 9
Views: 1347

Re: Clipping design idea.

Draining water.
by Hatchetjoe
Fri Oct 16, 2015 8:20 am
Forum: Silencersmithing Forum
Topic: Stamped Inconel Baffles - Where to start
Replies: 8
Views: 1560

Re: Stamped Inconel Baffles - Where to start

I've never heard of Inconel sheet available. Personally I think Inconel may not lend itself to forming by stamping techniques.
by Hatchetjoe
Sun Jul 05, 2015 3:39 pm
Forum: Silencer Talk
Topic: Winchester 1894 Gunsmith needed...time to mount a can?
Replies: 6
Views: 646

Re: Winchester 1894 Gunsmith needed...time to mount a can?

You'll probably need to ship it ti someone, contact Jim Pixley at
www.jpgrips.com
by Hatchetjoe
Sun Jul 05, 2015 3:38 pm
Forum: Silencer Talk
Topic: 1894
Replies: 0
Views: 311

1894

You'll probably need to ship it to someone. Try Jim Pixley at http://www.jpgrips.com
by Hatchetjoe
Thu Jul 02, 2015 4:18 pm
Forum: Silencer Talk
Topic: Mounting an AAC 762 SDN 6 on a M1A SOCOM
Replies: 1
Views: 480

Re: Mounting an AAC 762 SDN 6 on a M1A SOCOM

Enlarge image ZOOM 2079 M14 Socom 16 Gas Plug (Shorter)
Shorter plug design, has more volume for gas. Also recommended for use with sound suppressors. 17-4 Stainless, double heat-treated – 45 HRC, then M80HT 60 HRC.
by Hatchetjoe
Tue May 12, 2015 7:10 am
Forum: Silencer Talk
Topic: M&P Shield 9mm Threaded barrel?
Replies: 27
Views: 26715

Re: M&P Shield 9mm Threaded barrel?

Just thinking out loud here but maybe it would be possible t get a full size bbl and fit it the shield, then cutting and threading would be academic.Again just a thought without anything in front of me to look at or measure.
by Hatchetjoe
Sun Apr 26, 2015 4:15 pm
Forum: Silencer Talk
Topic: Subsonic
Replies: 32
Views: 2167

Re: Subsonic

The Fiocchi 158 grain ammo has been very good in my MP5. You mileage may vary.
by Hatchetjoe
Mon Apr 06, 2015 9:09 pm
Forum: Silencersmithing Forum
Topic: Need a blast sheild
Replies: 25
Views: 3900

Re: Need a blast sheild

BinaryAndy wrote:Image
:roll:
by Hatchetjoe
Fri Mar 27, 2015 5:03 pm
Forum: Silencer Talk
Topic: Choosing a 22lr pistol for suppressor
Replies: 22
Views: 2693

Re: Choosing a 22lr pistol for suppressor

Killerapplesauce wrote:My vote is for the Ruger mark 3.
Another vote here.
by Hatchetjoe
Tue Mar 24, 2015 10:43 am
Forum: Silencer Talk
Topic: Please help me find a 10/22 barrel
Replies: 20
Views: 1617

Re: Please help me find a 10/22 barrel

I wanted the same thing and all there is is the Youth model bbl, same experience with Ruger. I bought an 18 1/2" and had Que over at Rimfire central cut it back and reeinstall the sight. He does beautiful work.
by Hatchetjoe
Tue Feb 10, 2015 12:01 pm
Forum: Silencer Talk
Topic: Chemistry Question: The "dip"
Replies: 20
Views: 1319

Re: Chemistry Question: The "dip"

:) :)

Lord, please spare us form 'global warming', the 17º outside is
to [ .... ] much to take.



Yeah you got that right, just had another dance with the Ariens