Search found 1273 matches
- Thu Oct 18, 2018 11:04 am
- Forum: Silencersmithing Forum
- Topic: Spiral Baffle Design....yay or nay?
- Replies: 23
- Views: 7358
Re: Spiral Baffle Design....yay or nay?
Are you saying that the baffle in the picture is not one made by Greg? If so, I would find that odd because the picture stems from an interview that Greg did with the Firearm blog in his factory and it was labeled as the hexical. Greg has used this to build a coaxial design.Others have used it but ...
- Wed Oct 17, 2018 9:45 pm
- Forum: Silencersmithing Forum
- Topic: Spiral Baffle Design....yay or nay?
- Replies: 23
- Views: 7358
Re: Spiral Baffle Design....yay or nay?
Not up on the latest greatest baffle designs but this was perhaps one of the only commercially successful spiral baffle designs that I know of. It was created by Greg at GSL Technology (part of Gemtech back in the day). It was invented back in the 80's. This was a baffle that was talked about but n...
- Wed Jul 13, 2016 8:46 pm
- Forum: Silencersmithing Forum
- Topic: Booster-less micro cans vs slide weight
- Replies: 14
- Views: 3591
Re: Booster-less micro cans vs slide weight
I don't think it's going to be that simple. I want/wanted to do the same thing but gave up on the idea and going to just run a booster. I would think you'd have better luck trying to keep your weight further rearward than looking at total weight. the further your weight is from the fulcrum point th...
- Thu Apr 14, 2016 5:31 pm
- Forum: Silencersmithing Forum
- Topic: Form 1 Finished
- Replies: 42
- Views: 24042
Re: Form 1 Finished
His last time on this site was Sat Oct 17, 2015 1:09 pm.
I would not hold out on him answering.
I would not hold out on him answering.
- Sun Oct 25, 2015 8:19 pm
- Forum: Silencersmithing Forum
- Topic: Completely legit.
- Replies: 18
- Views: 4292
Re: Completely legit.
Go write a letter
- Tue Aug 25, 2015 7:09 pm
- Forum: Silencersmithing Forum
- Topic: Which of these K's is better?
- Replies: 8
- Views: 1924
- Sun Dec 07, 2014 7:43 pm
- Forum: Silencersmithing Forum
- Topic: Please review/critique my Form 1 design - Updated pg2 -Finished
- Replies: 45
- Views: 6644
Re: Please review/critique my Form 1 design - Updated pg2 -Finished
Very impressive and I think a first here for a ratchet mount in a Form 1 can
- Wed Oct 22, 2014 3:24 pm
- Forum: Silencer Talk
- Topic: broken suppressor - now a paperweight?
- Replies: 110
- Views: 12886
Re: broken suppressor - now a paperweight?
Op do not take this the wrong way but did you really make an effort to find the parts?
I just find it hard to believe that a malfunctin in a 22 can could send the parts into the abyss.
I just find it hard to believe that a malfunctin in a 22 can could send the parts into the abyss.
- Wed Oct 01, 2014 3:50 pm
- Forum: Silencersmithing Forum
- Topic: The impossible; Supressing the revolver
- Replies: 38
- Views: 8681
- Sun Sep 21, 2014 12:47 pm
- Forum: Silencersmithing Forum
- Topic: 10/22 bolt buffer from Delrin
- Replies: 8
- Views: 3633
Re: 10/22 bolt buffer from Delrin
Al Paulson talked about machining an annular groove in the rear of the Ruger barrel to hold an O-ring
to help quiet the bolt slamming forward. He also spoke about what you guys are referring to on the back side of the bolt.
Volume I page 238-239.
to help quiet the bolt slamming forward. He also spoke about what you guys are referring to on the back side of the bolt.
Volume I page 238-239.
- Thu Sep 11, 2014 7:32 pm
- Forum: Silencersmithing Forum
- Topic: Anybody done a form 1 using the new online eforms service???
- Replies: 48
- Views: 12972
Re: Anybody done a form 1 using the new online eforms servic
What design photo's? They are not requiredtheserxtremedays wrote:My first form 1 I filed 7/21 and was approved 08/15 it was really easy they have it setup to link photos of your design and your trust. I expect my second form 1 to be approved in the next few weeks.
- Mon Sep 01, 2014 1:45 pm
- Forum: Silencersmithing Forum
- Topic: Ti-Thirty Form 1
- Replies: 41
- Views: 9030
Re: Ti-Thirty Form 1
Damn nice work
- Mon Sep 01, 2014 1:39 pm
- Forum: Silencersmithing Forum
- Topic: 9mm, steel or aluminum?
- Replies: 18
- Views: 9147
Re: 9mm, steel or aluminum?
My head literally hurts from reading some of this. Buying a pipe cutter? Seriously why not just walk into a HD or Lowe's and have them cut and square a tube. I am sure if you are nice to the guy he will do it for a couple of bucks. Ok 9mm but hangun, rifle, subgun? You do not need steel for a 9mm. I...
- Fri Aug 22, 2014 8:05 pm
- Forum: Silencersmithing Forum
- Topic: some one please school me on aluminum
- Replies: 19
- Views: 5672
Re: some one please school me on aluminum
The MK9-K was 7.0" long and 2" in D with SS baffles all else was aircraft grade aluminum but for the mounts. It is viewed as one of the best sub guns cans of the day. The Gemtech Raptor was made entirely from 6061-T6 and 2024 and it was a great performer @9.1"L x1.4" D. I use to ...
- Mon Aug 11, 2014 6:46 pm
- Forum: Silencer Talk
- Topic: anyone know if Alan Paulson is still planning on vol 3?
- Replies: 9
- Views: 1540
Re: anyone know if Alan Paulson is still planning on vol 3?
Last time I inquired was over two years ago and like others have said he wanted to but I think the reality is that anything he pens today will be obsolete by the time it hits store shelves because of the internet
- Tue Jul 15, 2014 11:34 pm
- Forum: Silencer Talk
- Topic: Bendersquint aka Matt Please contact me via PM
- Replies: 12
- Views: 1737
Re: Bendersquint aka Matt Please contact me via PM
That's ok as he and I made a deal in June 2011 for him to make me a one off custom mount. Sent him the upper half to my Beretta 92G and $275 as agreed. All was great in the begining with good correspondence and than he vanished. I reached out in Nov 2011 and nothing and than in April 2012 and nothin...
- Tue Jul 15, 2014 10:23 pm
- Forum: Silencer Talk
- Topic: 22 Blackbox vs 22 Osprey
- Replies: 5
- Views: 1323
Re: 22 Blackbox vs 22 Osprey
Both are old tech and just copies of maxims high bore in square form. If square worked good in 22lr you would think there would be a few already. ( some people still like playing with blocks :mrgreen: ) Are you saying that Maxims were poor performers because as I recall Al Paulson tetsed one and th...
- Tue Jul 08, 2014 3:28 pm
- Forum: Silencer Talk
- Topic: Any Dealers offer Layaway on Suppressors?
- Replies: 34
- Views: 8976
Re: Any Dealers offer Layaway on Suppressors?
Capital Armory does a $200 down plus any applicable taxes and a small service fee (do not know how much that is) and they let you pay the balance over four months. Site says paperwork is filed immediately. I bought a Saker from them because they allowed me to have it my way ie with a brake instead o...
- Tue Jul 08, 2014 1:51 pm
- Forum: Silencer Talk
- Topic: Defiance suppressors
- Replies: 0
- Views: 572
Defiance suppressors
Has anyone had any experience with their line that has the locking LID that was shown at the 2012 Shot Show? http://www.defensereview.com/kriss-k10-super-v-vector-xsmg-submachine-gun-smg-product-improvedupgraded-multi-caliber-subgun-for-special-operations-forces-sof-and-close-quarters-battle-cqb-app...
- Wed Jul 02, 2014 9:41 pm
- Forum: Silencer Talk
- Topic: Need advice on either Ti-Rant 9 or 9s
- Replies: 15
- Views: 1613
Re: Need advice on either Ti-Rant 9 or 9s
As I said if you like to shoot a lot you will have to recharge the system after "X" number of rounds and that might get old. Of course you can just shoot it dry and deal with the increased noise.
- Wed Jul 02, 2014 4:58 pm
- Forum: Silencer Talk
- Topic: Need advice on either Ti-Rant 9 or 9s
- Replies: 15
- Views: 1613
Re: Need advice on either Ti-Rant 9 or 9s
If you like to shoot a lot I would think the 9s would get old quick.
If you want to go small go small and look into a can like the DeGroat "Nano" or the Thompson Machine "Poseidon".
If you want to go small go small and look into a can like the DeGroat "Nano" or the Thompson Machine "Poseidon".
- Wed Jun 25, 2014 9:35 pm
- Forum: KAC
- Topic: KAC Snap-On Suppressor
- Replies: 11
- Views: 4882
Re: KAC Snap-On Suppressor
PM sent sorry for the delay.galconv500 wrote:For CThomas - per your message above from last week, you indicated that you planned on sending a PM. As I have not yet received it, do you still plan on sending one? Thanks and have a good day.
- Wed Jun 18, 2014 4:43 pm
- Forum: KAC
- Topic: KAC Snap-On Suppressor
- Replies: 11
- Views: 4882
Re: KAC Snap-On Suppressor
I was hoping that you would emerge again with good news.
I will be sending you a PM.
I will be sending you a PM.
- Wed Jun 18, 2014 4:33 pm
- Forum: Silencer Talk
- Topic: Help me find and choose a 6" (!!!) 300blk barrel - Updated
- Replies: 14
- Views: 6676
Re: Help me find and choose a 6" (!!!) 300blk barrel - Updat
Op giving me a headache with his 6" 7.5 inch switching DERP. FYI if you did go with a Paladin barrel. Do not get a barrel with an on/off button. The button gets fouled with as little as one round which makes the button useless unless you have a punch and hammer with you. I thought it would be c...
- Tue Jun 17, 2014 8:13 pm
- Forum: Silencer Talk
- Topic: Is e-file taking Form 4 submissions?
- Replies: 8
- Views: 1447
Re: Is e-file taking Form 4 submissions?
No one has any idea as to when e-file might be back up and running.
FYI just in case you are not aware but Form 4's via e-file are only for Corps, Trust's not individuals.
FYI just in case you are not aware but Form 4's via e-file are only for Corps, Trust's not individuals.