Are the PSA barrels pistol gas or a carbine gas system?

My first batch is ready to drink but it has some serious stuff floating in it. I know that there is a certain amount of sediment in it but this seems to be too much (suspended in it, not on the top) anyone know it this is normal or have I lost this batch? How much is too much stuff?

Some go with the Novak rear/rail combo. Then replace the A1 guts with the high end Tech-sights (Tech-site sells the internals with out their base)giving you the rail and the stronger ear type setup (Novak) with the windage/elevation adjustments of the Tech-sights. That is something I didn't know - ...

BFG 9000 wrote:I'm curious how .22 LR sounds going through the QMF-2 and Isis dry. Maybe a vid of 300 Whisper going through 'em dry, too.

In for that. Looks good guys.

Those are good prices that you all are quoting they are going $339-349 around here. Will probably have to transfer one in.

I love my Specter. I am interested in seeing some numbers on the new baffle stack compaired to the old one before I would consider "upgrading". Heck I need a second .22 silencer.

Long story short, my only 10/22 that I have threaded is my wife's. The stock on it is so short that I rarely get any time behind it. For Chistmas this year my wife got me a Ruger Tactical. I was sick as a dog, but grabed it, a spacer, and my SWR Specter and went out, braving the elements, to the ran...

I am sick-as-a-dog but got out this afternoon for a function test with my boys. Ran great! No problems what so ever (I need a bolt buffer in there. It was louder that the rifle's report!). Poor pics from my iPhone4.

When ahead a ran a Reminton choke tube wrench in and out of the FH to give me a small T-handle to turn off (still really on there). From muzzle to spacer (which looks to be a AR crush washer) is .560". From muzzle to shoulder of barrel (sans spacer) is .707". Got my spacers in today (.200...

When ahead a ran a Reminton choke tube wrench in and out of the FH to give me a small T-handle to turn off (still really on there). From muzzle to spacer (which looks to be a AR crush washer) is .560". From muzzle to shoulder of barrel (sans spacer) is .707". Got my spacers in today (.200...

I have seen it happen (40 S&W in a 45 acp). No big deal really, bulged and split case, bullet left the barrel as normal (most probably flipping ass over tit reference not engaging the rifling), gun did not cycle. The spent round was manually ejected and we carried on with training. Again, no bi...

When ahead a ran a Reminton choke tube wrench in and out of the FH to give me a small T-handle to turn off (still really on there).


From muzzle to spacer (which looks to be a AR crush washer) is .560".
From muzzle to shoulder of barrel (sans spacer) is .707".

I just picked up one of these this evening. I am trying to get the FH off (damn it is on there). The manual says that there is a spacer on there as well as the FH. If I can get it off I can measure with and without the spacer for you all. I will probably wait until the morning in case I need to take...

DEVIL DOC wrote:The LWRC ambidextrous receiver is especially nice.

http://www.youtube.com/watch?v=bY8njXxc ... ata_player

That looks pretty cool. Did they ever release that short stock setup? I don't see it on their web site.

JasonM wrote:The Q buffer with a regular GI spring is a great combo. prevents bolt catch breakage from overtravel.
.

GI Carbine length spring?

On a 9mm upper there are a couple differences: there is no hole for the gas tube, they typically have the 3/4 length ejection port door and the gas deflector (yes it is a gas deflector not a brass deflector), and probably the most over looked item is that it does not have a cut out for the cam pin t...

lcambre wrote:The gunsmith was Steve Pitt at Whistling Pines Gun Club.

Roger that. Thanks.

lcambre wrote:I bought a 7" barrel and had it chopped to 5" and threaded. I put a CMORE sight on it so no need for iron sights. This was done by a gunsmith in Colorado Springs.

Which smith in the Springs?

I was going to call customer service on Monday but figured I might get an answer faster here. What barrel diameter is needed for the SCAR-H-SD mount? I think the threading is 5/8 x 24. Setting up a LMT MWS for SCAR-H-SDs, might have to get the barrels profiled to get a mount on there. Thanks! :wink...

I too have been looking at the KIDD stuff. Threaded Fluted for Suppressor. Any of you guys running a can on a Fluted or Kidd barrel. Lookin at the trigger upgrade too. I did manage to get a threaded Barrel from GemTech with the Iron Sights, its a constant thing to find them in stock.. but works anf...

rivercityrats wrote:S&W 422 , poor mans mod 41. Barrel bushing from Rimfire Industries
Spectre can shoots great, and has no precived shift.

I am doing the same combo (but on a 4"). I really like it.

96 SS wrote:Tim having some fun:

WINNER!

Jack_Bauer wrote:Would you get the most accuracy out of an 1:9 twist bull barrel or a 1:16 when using subsonic ammo?

There are sub-sonic rounds in the typical (read this lighter) weights are fine with the 1:16. The 1:9 seems to be the prefered for the 60gr (heavy weight) subs.

your wife's rifle looks great. looks like she's got the Kidd trigger and bolt charging handle as well. did you upgrade the bolt too? Replaced the ejector (with a Kidd) but other than that the bolt is stock. Shortly after this picture I bought a second Kidd for my rifle. Same setup on mine except Cl...

Is the barrel able to be removed (like the 77/22) for threading or is it threaded into the receiver like a regular centerfire rifle?