Search found 105 matches

by krecon1
Mon Nov 07, 2011 11:51 pm
Forum: AAC
Topic: M4-1000 Problems
Replies: 10
Views: 1326

Re: M4-1000 Problems

What about mating your 18t can to a 51t mount? You could figure out where your springs lay when the can is fully seated onto the mount, then machine the 51t mount to have the springs fall into the notches when fully tight. The problem with the 18t mount is at best you get one spring to fall into a n...
by krecon1
Sat Jul 30, 2011 12:56 am
Forum: AAC
Topic: Black out permanently attached?
Replies: 2
Views: 438

Re: Black out permanently attached?

Shouldn't be any issues as long as it is done properly. I had LWRC pin two on my M6A3s - no issues running the M4-2000s.
by krecon1
Fri Jul 01, 2011 4:08 pm
Forum: AAC
Topic: Thread pitch for Titan QD brake?
Replies: 3
Views: 409

Re: Thread pitch for Titan QD brake?

I don't think you'll need to do any work to the barrel unless you want to... Last i knew, TiTAN brakes were available in 3/4-24. They are, but looking at your threading guide/blueprints the M18-1.5 will better fit my barrel due to it's current profile - it would need to be cut back more to meet the...
by krecon1
Thu Jun 30, 2011 9:20 pm
Forum: AAC
Topic: Thread pitch for Titan QD brake?
Replies: 3
Views: 409

Thread pitch for Titan QD brake?

Going to be replacing my Badger FTE (3/4-24) for a Titan brake and suppressor on my Surgeon .338 Lapua. Assuming the barrel will need to be reprofiled slightly to fit the AAC brake.... Is there any reason why I couldn't or shouldn't just get a M18-1.5 threaded brake and have the smith cut, thread, a...
by krecon1
Tue May 31, 2011 12:06 pm
Forum: Rifle Discussion
Topic: Muzzle brake or flash hider for 8" Build?
Replies: 3
Views: 311

Muzzle brake or flash hider for 8" Build?

Just looking for some clarification on direction to go for some 300 AAC BO upper builds. I have two 762SDs (18t) that are not being used - figure I'll build some BO uppers to host them. From the threads I have read the blast effect on the first baffle is nowhere near as harsh as a 5.56 and shouldn't...
by krecon1
Sat Apr 02, 2011 4:30 am
Forum: Silencer Talk
Topic: Any suppressors you were dissatisfied with?
Replies: 33
Views: 2256

Re: Any suppressors you were dissatisfied with?

My AAC 762-SD 18T mount. The 18T mount sucks. Other than that it's a great can Ditto on this!! :( Bought two 18t 762SDs. Both turned a 1 MOA rifle into a 3-4 MOA shotgun. Between the can being loose and backing off it sure isn't useable if having any amount of accuracy is important. Might find thei...
by krecon1
Thu Mar 24, 2011 1:05 am
Forum: AAC
Topic: Retainer springs for '07 762 SD?
Replies: 25
Views: 4261

Re: Retainer springs for '07 762 SD?

When did that become the case? I bought my 18T can in late 2008 and the manual has instructions for changing the spring at home. Since we were acquired by corporate overlords that interpret BATFE rules in their own way. So now you guys are stuck doing the small stupid stuff that could be done by th...
by krecon1
Sun Mar 20, 2011 11:08 pm
Forum: Silencer Talk
Topic: Front exit hole strike?
Replies: 32
Views: 2865

Re: Front exit hole strike?

Most of us aren't. AAC sold thousands and thousands of 18T suppressors. You don't see hundreds of threads full of people having problems. A few people have issues with 18T but most don't. I have an 18T can with many rounds through it and it never backs off. It's unfortunate that some people have pr...
by krecon1
Wed Mar 09, 2011 9:17 pm
Forum: AAC
Topic: AAC 7.62 Suppressor options
Replies: 51
Views: 12844

Re: AAC 7.62 Suppressor options

What about a SCAR-H-SD? Good option if you can find one, but since these are not/have not recently been made for civilians, they are not a practical choice. there is also an issue with less flexibility in terms of mount options- needing 2.5" of clear barrel, only flash hider mounts, etc. I snagged ...
by krecon1
Thu Jan 13, 2011 5:26 am
Forum: KAC
Topic: SR-15 Match
Replies: 12
Views: 2042

Re: SR-15 Match

Had Gemtech cut and thread the bbl to 18" and a bi-lock installed; wearing a M4-96D in the picture. The SS bbl was hit with GunKote. The rifle now wears a VLTOR E-MOD buttstock. Very accurate rifle - esp loves the BH 77Grn. I was lucky enough to have that UNS for a few weeks for T&E, but had to give...
by krecon1
Fri Sep 03, 2010 9:57 pm
Forum: Photos and Videos
Topic: Trying out the 96 Land Cruiser in Moab, UT - Short Video
Replies: 5
Views: 460

Re: Trying out the 96 Land Cruiser in Moab, UT - Short Video

This was at Cruise Moab '09 - first day was Fins-N-Things, second day was Gold Bar Rim, last day was Steel Bender. Went up in trail ratings as I got the feel of the 80. I went from a lightly modded Jeep XJ to this beast, so it was quite a change in driving.
by krecon1
Wed Sep 01, 2010 10:34 pm
Forum: Photos and Videos
Topic: Trying out the 96 Land Cruiser in Moab, UT - Short Video
Replies: 5
Views: 460

Trying out the 96 Land Cruiser in Moab, UT - Short Video

This was the first time taking my 1996 FZJ80 up to Moab, UT and trying her out on the trails. Built it up with a 4" lift, running 315s, regeared to 4.88. Pretty much all armored up and weighing in at slightly over 6000lbs. Slee Off-Road, a custom Land Cruiser parts company out of CO supplied almost ...
by krecon1
Tue Aug 31, 2010 9:47 am
Forum: Photos and Videos
Topic: LWRC REPR Video Overview
Replies: 1
Views: 336

LWRC REPR Video Overview

A two part video (about ten minutes each) I made displaying some of the characteristics of the REPR. I tried to hit everything I thought was important, but if I missed something let me know. Part 1 http://www.youtube.com/user/Hurricane810kr?feature=mhum#p/a/u/1/u9QCqEG9gEs Part 2 http://www.youtube....
by krecon1
Wed Aug 11, 2010 4:58 pm
Forum: Photos and Videos
Topic: Colt 6450 9mm Carbine Overview Video
Replies: 3
Views: 680

Colt 6450 9mm Carbine Overview Video

Made a short (<10 minutes) video giving a quick overview of a Colt 6450 9mm. If you haven't seen a 6450 up close or know what Colt does to change a M4 shooting 5.56 into one shooting 9mm then you may find this of interest. Let me know what you think. http://www.youtube.com/user/Hurricane810kr#p/a/u/...
by krecon1
Thu Aug 05, 2010 9:48 pm
Forum: South West
Topic: Albuquerque, NM Form 4 CLEO Sign off
Replies: 6
Views: 31318

Re: Albuquerque, NM Form 4 CLEO Sign off

Anyword if Schultz will do the sign-offs? If not, is the Sante Fe State Police HQ still the place to go? Haven't been able to get any straight answers for the sign off in the ABQ area.

Thanks!
by krecon1
Wed Jul 21, 2010 6:25 pm
Forum: KAC
Topic: The Original SR-15 "Match" Rifle...Where did they go???
Replies: 18
Views: 3118

Re: The Original SR-15 "Match" Rifle...Where did they go???

I can't tell you the last time these were released commercially in quantity but the last time I dealt with them I received 100 rifles in a mix of 18.5" and 20" barrels about 3 years ago which sold out extremely fast. But since there has been a large amount of interest I email KevinB about these and...
by krecon1
Fri Jul 16, 2010 2:11 am
Forum: KAC
Topic: The Original SR-15 "Match" Rifle...Where did they go???
Replies: 18
Views: 3118

Re: The Original SR-15 "Match" Rifle...Where did they go???

This is my SR15 Match - had GemTech cut the barrel to 18" and install a bi-lock. I now run an older M4-96D on this. I bought this rifle in 2003, so at the time this photo was taken I was still using a Bushmaster, Pre-Ban lower to be "legal" though it now sports its KAC lower. One of the more accurat...
by krecon1
Fri Jun 25, 2010 3:50 am
Forum: Classified Ads
Topic: M110 kit for sale on Sturm
Replies: 11
Views: 2081

Re: M110 kit for sale on Sturm

It's kinda like transferable machine guns. Not exactly worth what they cost but If they hold their value and you can afford them then whats the harm. I would bet who ever can afford that gun already has a pretty nice truck. Or drives a medicore automobile and steadily bought certain stocks and ETFs...
by krecon1
Mon May 31, 2010 4:51 pm
Forum: Photos and Videos
Topic: Videos - LWRC REPR post mag modificaton and Kel-Tec PLR16
Replies: 3
Views: 482

Re: Videos - LWRC REPR post mag modificaton and Kel-Tec PLR1

chingon wrote:What distance was the ringing gong at in video #2?
200 yards.
by krecon1
Mon May 31, 2010 9:09 am
Forum: Photos and Videos
Topic: Videos - LWRC REPR post mag modificaton and Kel-Tec PLR16
Replies: 3
Views: 482

Videos - LWRC REPR post mag modificaton and Kel-Tec PLR16

Some videos from the range today. The REPR is up and running and shooting without issue after LWRC's magazine modification. I did a couple different things to run the gun, all went off without a hitch, so faith has been restored in the system. LWRC made things right. No tool was needed to adjust the...
by krecon1
Sat May 29, 2010 1:43 am
Forum: AAC
Topic: 51 tooth 762-SD in Production !!!!!!!!!!
Replies: 164
Views: 10320

Re: 51 tooth 762-SD in Production !!!!!!!!!!

I had recently ordered (4) AAC suppressors: (2) M42000s and (2) 762SDs. I was debating to wait out for the 51t, but all word appeared they were a no-go at the time, but doesn't seem to be the case now. Am I pissed, sure, but what to do now? Do I sell the 18t 762SDs at a loss just to purchase and get...
by krecon1
Wed May 26, 2010 1:42 am
Forum: KAC
Topic: Fair price for the Mk11 Mod 0 suppressor?
Replies: 10
Views: 1738

Re: Fair price for the Mk11 Mod 0 suppressor?

Even $1750 seems high. I've seen them as low as $1100 - paid $1150 for mine from Knesek, but that was in '07.
by krecon1
Sun May 23, 2010 11:58 pm
Forum: KAC
Topic: Is there any diffrent generations of sr-25 URX forearms
Replies: 2
Views: 628

Re: Is there any diffrent generations of sr-25 URX forearms

Let's see how close I am on this before a KAC rep sets me straight: Rifle length SR25 URX: Old: The front sight is adjust from underneath with an allen wrench, similiar to the Mk11 Mod 0 folding sight. Front sight does not lock open. New: The newer versions have a thumb wheel adjustable front sight ...
by krecon1
Sun May 09, 2010 4:41 pm
Forum: Photos and Videos
Topic: Benelli M1S90 Short Barreled Shotgun Blasting Slugs
Replies: 1
Views: 559

Benelli M1S90 Short Barreled Shotgun Blasting Slugs

Just a short video I made with the M1S90 SBS. The recoil is harsh, especially with slugs, but a solid stance and shouldering help out immensely. Not the biggest fan of the rifle sights, prefer the ghost rings, but when built this up I didn't have a choice. With the cyclinder bore and ranges it would...
by krecon1
Sun Apr 18, 2010 6:29 pm
Forum: Photos and Videos
Topic: 800 Yards with KAC Mk11 Mod 0 and Remington 700 300WM - Vids
Replies: 3
Views: 780

800 Yards with KAC Mk11 Mod 0 and Remington 700 300WM - Vids

Some videos today shooting at the 800 yard line with my Mk11 Mod 0 and one of my 700s in 300 WinMag. Wind was catching me on a few shots, so that's where the misses are coming from. Target was an IPSC sized steel. Enjoy. Remington 700 300 WinMag http://www.youtube.com/user/Hurricane810kr#p/a/u/0/-02...