I don't believe Bendersquint was saying there was a performance gain. Just that there isn't any performance lost. (It works the same once installed). You are correct, I never said there was a performance gain, just that I am not seeing any loss to it. You don't have to have a performance upgrade/in...

The change is only for the 7.62 muzzle brakes and it was to accommodate the longer threads by some manufacturers. Performance is identical to the old style brake and the ports still align at the 3 and 9 o'clock position. These just allow for a wider range of compatible host weapons due to the new ....

This is great news! I've been running the Blackout on my 10.3" barreled AR because the old style brake would have caused clearance issues between my can and the rifle. I will be picking one of these up very soon. Nice to see AAC being responsive to their customers. I don't understand, Is your ...

Fail to see the issue. Does aesthetics rank higher than performance for you? It still has wrench flats for installation...... I have yet to see or be told what the performance gain of this style vs the old style is? Please explain the higher performance you discribe...... Also, as I mentioned the n...

Well I have not heard any word about this until I got the breaks for my 300 blk uppers. Wrench flats are gone and baffles are thinner. AAC rep stated: the change was due to customs requests. Now I have two breaks that look completely differently than the 5 others I have mounted on various rifles. Ki...

well well well.

http://www.rainierarms.com/?page=shop/d ... ct_id=3432

Bump

Just to confirm, I have called and left a message (Domestic sales) , I have emailed customer service and return. and have sent a PM to "3". I have not heard back from anybody. I would like to get the screw and rail piece for the following sight Pin # 22109. I have the sight but somehow los...

Just a quick note, I have shot mostly 5.56 ammo through my Cyclone-K. I do not have ANY erosion like that. The baffle wear is slight and even, a light fine sand blast kind of finish. I have NO jagged sharp flame cutting nasty shark tooth edges on my baffles. It almost looks like micro fracturing wi...

good thread I only post good threads :lol: So, I was able to get on the phone with mike this morning. I have to say GREAT CUSTOMER SERVICE and it is always a pleasure speaking with mike. He went through each rifle I listed and explained what I was probable seeing. We both agreed that the 308 host g...

So aside from the pissing match
I have added the list of host rifles and sent a PM asking whether I should send this in for inspection/Repair.

how would you like me to proceed mike?

J


Sending another PM now

will sliencerCo make a 18t adapted for the saker? I know this is super nitch but some of us 18t guys are stuck with that platform and it would be a great design if you could make it compatible with this mount. I would certainly buy one (edit) i would be on the phone today to get the paper work rolli...

WOOOO< WOOOO NELLY Easy guys, the only reason I posted this was to get some opinions, not too incite some kind of pissing match. If the AAC bashing continues ill just pull the post. Thanks to all who have contributed that said, 1. Yes I have been having accuracy problems with match ammo in all of my...

Thanks I tried hard to get these pictures, not sure how others do it so well. that said. I was wondering whey I been getting inconstant accuracy out of this can with match 308 ammunition, thought it was my gun not wanting to run suppressed. that said, all as been factory Federal ammo with the except...

Today while demoing my 762-SD for some friends I noticed some pretty extensive baffle erosion in the baffles just past the first one. I only have about 1200 rounds through this suppressor. A combination of .223, 300 blackout and 308. But from what I am seeing the baffles are missing a lot material a...

Still looking for somebody to bore this out so I can use it on My AK,

PM sent back, I am eagerly awaiting your response . :mrgreen: I have a hungarian ak 762x39 that is threaded in 12/28 rh And a spare AAC blackout flAsh hider in 1/2x28rh that is for AR in 5.56. My question is, is it possible to drill out the blackout mount to .30 cal so I will work on my ak. And is i...

I have a hungarian ak 762x39 that is threaded in 12/28 rh And a spare AAC blackout flAsh hider in 1/2x28rh that is for AR in 5.56. My question is, is it possible to drill out the blackout mount to .30 cal so I will work on my ak. And is it possible to do this on my drill press or is it better to sen...

SOLD; and I am out of this

Like the title says, I have a complete set up for S&W M&P 9 This has seen aright around 200rd and has run flawlessly I am switching systems and am clearing out of some spare parts. Factory threaded barrel in M13.5x1 LH Gemtech Multi Mount Piston in M13.5x1 LH and a Gemtech thread protector i...

I am not sure how it could ever be the same price as .223/556 ammo. The bullets are more than twice the weight which means the cost in raw materials for them would be more than twice as much. And everything has to do with volume. Until someone can produce brass in the volume that 223/556 is produce...

I brought this up once before, and and still waiting on this ammo. I was promised that this ammo would be out right quick and spent a s--t ton of money on building uppers for this round. Like the little AAC fan boy I once was... I bought into this and stayed away from the 6.8 which I was going to bu...

Nice 20.00 a box again. still waiting for that .556 price ammo that we were promised.

J

M9, Point blank X2

Your the man Mark!!!! Thanks for the info.

I love this setup!

BookHound wrote:Looks like a KRG bolt knob. Installs without modifying the bolt handle.

Looks like a Bell & Carlson stock.

Mark