Thanks, NOT!!!

66427vette wrote:Those are some nice margins! My buddy just ordered a 2013 gt3 with his pmag profits.

Interesting... I have 50 pmags w/ window... needing a new Aimpoint T1... giving some thought on selling 20 pmags to fund T1 purchase but don't want to price gauge.

Here is a good thread about using the wrong ammo in your gun. http://www.300BlkTalk.com/forum/viewtopic.php?f=128&t=81802 Not my picture, i cant remember where i stole it from, it just looks cool... It is almost artistic the way to baffles peeled the jackets off a few bullets before completely ...

You're probably having a harder time with blowback than most because your rifle is an RRA, which are known for having larger gas ports than normal. You're also beating your rifle to death with the extra operating force of being both over-gassed and added backpressure of a can. An adjustable gas set...

After 1000 rounds with the PRi Gasbuster.. I had a blacken face.. so I'd say that sealant is recommended. If you don't use the forward assist, my buddy at Weapon Outfitters has a replacement to allow gas to escape through the forward assist hole. We both shot the same # of rounds. He had a regular ...

roxy wrote:L.A.R. OPS-4 Right Hand Side Charging Receiver...., if you can find one!

http://www.youtube.com/watch?v=EtzLZJiWwJE

Or install a gas piston conversion..., either way..., no more "gas face!"

Fantastic, thanks!

doubloon wrote:Don't go cutting any laws.

Damn, how did I miss that? Ok, LAWNS not laws!

HKschalldampfer wrote:Syrac ordnance adjustable gas block and gas buster charging handle. Even with the gas buster I still use RTV because every bit helps.

HKschalldampfer - Thanks Sir. Tomorrow, going to my local gun runner (aka shop), to discuss yawls suggestions for my (hopefully) new 300BLK build.

Mahalo,
Kid

J Krammes & 700PSS - Thank you both.

Holly mutha of pearl - 7.62SDN-6 = $1,050.00... so much for my bonus going to just a new 300BLK build with Aimpoint Micro H-1... maybe I can cut laws for 5 bucks a yard as I did as kid in the 60's....

My next question, which AAC can is preferred for 300BLK?

Aloha,
Kid

300BLK will NOT shoot from a 5.56 gun... It will blow up! Also, it will not fit through your Ranger. 300BLK is .308, your RR is .223, and so is your can. At a minimum, you will need to swap out the barrel to 300BLK, but I recomend a whole new upper and a new can. Krammes - Great stuff Sir! Must mos...

jt526 - Much much thanks!

BTW, the links you supplied are fantastic, THANKS!

Aloha again, From my 'blowback" post, noted that I've not shot nor kept up with the AR15/silencer world in 3 years. With that said, my questions below: 1. With my existing Rock River .223/5.56 and AAC Ranger II, may I shoot 300 AAC Blackout ammo with no modifications? 2. If modifications are re...

After almost 3 years away from the AR15 world, I'm back with hopes of correcting what drove me away. After the long wait for ATF approval on my AAC Ranger II... the blowback issue was disheartening to say the least and have not shot my AR15 since. I searched for "blowback" posts but did no...

Well, I got my Red Jacket AK SBR 26 days after sending in my form 4. Wow. I am amazed. 1.NFA Item: SBR 2. Form Type: Form 4 3. Transferee Type: trust 4. Form 4 Sent: 10/15/10 5. Check Cashed:10/20/100 6. Pending Date: 7. Approved Date:11/4/10 8. Form 4 Received: 11/10/10 9. Picked up from Dealer: 1...

1. NFA Item: AAC 762SD 2. Form Type: Form 4 3. Transferee Type: Trust (third time) 4. Form 4 Sent: 10/6/2010 (Holiday weekend 3 days wasted) 5. Check Cashed:10/13/10 6. Pending Date: 10/22/10 7. Approved Date: 11/05/10 8. Form 4 Received: ??? 9. Picked up from Dealer: ??? 10. Examiner Name: Shipman...

NFA Item: AAC Pilot Form Type: Form 4 Transferee Type: Trust Forms Sent: 7/21/10 Check Cleared: 7/26/10 Pending Date: Approved Date: Can in hand: 11/5/10 Examiner - As I noted previously, didn't bother checking status, and let me tell ya lads, no unnecessary stress. Hope to go shooting in a few days.

retiredmp wrote:Thanks for the response guys. I will keep my fingers crossed and go on about other business till it gets here.

There you go...exactly what I'm doing with my second can....it cums when it cums.

thunderh wrote:Nfa item: Uzi sbr
Type: individual form 1
Sent: Feb 6 2010
check cashed: ? (money order)
Pending: April 2, 2101
Approved: July 21 2010
Stamp received: July 24, 2010
Examiner: Ted clutter

Man that was a long wait.

I feel your pain bruddah...but what a great feeling once in hand, yes?

Queso Grande wrote:

lsstokes wrote:

Queso Grande wrote:The stamps are on the way.

lucky bastard. I'm at 137 days.

I am at 133 now, the stamps approved Monday, I am hoping tomorrow is the day.

Much congrats!

A new trek begins..... Good luck to me!

NFA Item: AAC Pilot
Form Type: Form 4
Transferee Type: Trust
Forms Sent: 7/21/10
Check Cleared: 7/26/10
Pending Date:
Approved Date:
Can in hand:
Examiner -

WOOHOO WOOHOO WOOHOO After 145 looooooooooooong days, finally , my very first can is in my possession!!!!!! NFA Item: AAC Ranger II Form Type: Form 4 Transferee Type: Trust Forms Sent: 2/24/10 Check Cleared: 3/3/10 Pending Date: 4/6/10 Approved Date: 7/8/10 Can in hand: 7/17/10 Examiner - Ted Clutt...

Most disappointing...after waited more than a month, just called - still pending!

NFA Item: AAC Ranger II
Form Type: Form 4
Transferee Type: Trust
Forms Sent: 2/24/10
Check Cleared: 3/3/10
Pending Date: 4/6/10
Approved Date:
Can in hand:
Examiner - Ted Clutter

Has anyone that sent forms off in March received them back yet? Did anybody have a yes answer on this? I have both a form 4 and form 1 I sent out March 16th; checks cashed March 26th and both went pending April 13th. Still not in approved status when I called today as of March 25th. NFA Item: AAC R...

Diomed wrote:

Jack_Bauer wrote:Reason: Tactical Competition Shooting

Very interesting...

Yes very...how do you go about proving it?