The SBR will be for a 300 BLK, 8.5"bbl and subsonic only. I have other rifles if I want supersonic. If the suppressor goes on another rifle in the future, it needs to be rated for the .308 Win I would definitely want to go with a muzzle brake. If the suppressor ends up going to 308, it'll make ...

I’ll be building an SBR and need to order a Specwar or Saker as soon as possible. The SBR will have a 8.5” barrel and, for better or worse, I want to use a rifle length hand guard. This will mean the hand guard has to be taken off to remove the suppressor. This really isn’t much of an inconvenience ...

Even though both the 40 and 45 are subsonic, the 40 S&W will have much higher pressure than the 45 ACP In the Form 1s that I’ve built, higher pressure made the baffles work better These were 22 mono-cores but they worked much better on pistols than rifles Matter of fact, they worked excellent on...

If you had 3 quality suppressors. One for the 9mm, one for the 40S&W, and one the 45ACP 3 identical handguns. Say 3 full size M&Ps chambered for the 9, 40 and 45 Would the 40S&W be the best to suppress with off the shelf ammo? The 9mm would be supersonic without loading your own or buyin...

I’m getting a custom shop put together. Leather products such as slings, belts, etc but also building custom 1911s. Just like many other small businesses, a niche market approach seems to be the best way. I would like to concentrate on 9mm Commanders. Colt has been making them for decades and there ...

cs78 There’s was a great one on Bayoushooter.com.It was done by a couple of attorneys There is an attorney that goes by the handle of ‘mouthpiece’ on BS that does a lot of trust for NFA items I just looked at the site and couldn’t find it but I do have it saved in a PDF if you would like it e-mailed...

daviscustom Damn, you’re right. I have a number of Form1s and Form 4s. All my guns, cans, equipment, etc.. are moved into storage because of possible flooding. There’s no way I could verify with paperwork. Are you sure diameter isn’t needed? I ’m certain I always include diameter eastern-hunter Damn...

I’ve built a few Form 1s Answers to questions; 1) All of it 2) All of my Form 1s and Form 4s are on a Trust. The same with many other people. No problem 3) 4) Call engravers in the phonebook. Most just do trophies and such, others can only do flat surface engraving. Make sure you ask the engraver if...

Why not go with 60% cones at .06 thick. You could then spend time designing the flash suppressor part. Some may not put too much effort into the FH but it will prevent bore erosion at the muzzle You could also research baffle spacing, blast chamber length, materials, welding, etc… I build mono-cores...

Maybe Netanyahu should tell Obama the United States has to move to its original borders Say, the original thirteen colonies. Surely the Indians wouldn’t object Of course they would still want their welfare and casinos America won’t be Israel’s friend then I think you’re right, God will destroy the U...

I’ve found the Nordic NC-22 upper to be the most reliable 22 upper out there You will need to have the barrel removed and shortened. While they’re at it, the barrel can be threaded with the right relief Also, you can put the same hand guard as your 5.56 on the Nordic I’m in the process of moving and...

Should the United States go back to what border in what year Do we give back land to France or Spain? How about we give it all back to the Indians? The West Bank never did belong to Jordan and it was never recognized as such. Jordan had an illegal occupation of the area but lost it after two wars wi...

WooD When the first page of the Form 1 comes out of the printer just flip it over a print the second page on the back And yes, it must be 1 page printed front and back and not on two separate pieces of paper On the serial number thing, I really don’t remember but I think you need three digits. Even ...

You might want to consider a Taig. I bought one about 6 months ago and couldn’t be more pleased After using Chinese machines, the Taig is great. Precision and quality more than makes up for the little extra money it cost I do think a dovetail is needed and the Taig has it I bought the Model 2019ER f...

Can you assemble and sell custom ARs or 1911s without ITAR?

What else is needed? A type 7 FFL or Class 2 SOT or both?
Is anything else needed?

The removable barrel is the sticky part

The host will be a Ruger 10/22. The barrel can easily be removed and installed on any receiver
This would make the whole thing(barrel and tube) a suppressor

I’m looking at doing an integral myself. Do you put the tube length as the suppressor length or the length of the barrel since the barrel is the suppressor? What I’m considering using is a 16.5” barrel with the tube coming back over the barrel 11” The barrel will have slant baffles cut into it The t...

I’ve built a number of 1.5 OD aluminum mono-core suppressors
All I use is a 10x20 lathe and a Taig mini milling machine

It would be nice to have large lathe. I have plans on getting a big one
The mini milling machine is more than big enough for aluminum but a nice big one would be better for steel

I have no idea what the dimensions will be of your monocore but what I use is 1.5 dia7075 round stock The round stock can be ordered from online metals.com for $26/ft For the tube 4130 seamless 1.5 OD x .058 wall thickness @ $13/ft from onlinemetals Total price of $40 plus shipping For the blast cha...

bikefreek Exactly, I could still see her pupils at 300 yards in a rearview mirror. She was still walking into the light and waving her hands as if she knew people there Her pupils were a blackness beyond reality. They were portals where distance doesn’t have any meaning The time line of the event wa...

People here still don’t get it. This is a long story that involved many people and directly related events There was NO ONE EVENT Ten minutes before the ghost sighting we had been at a place that had seen multiple murders None of us knew this at the time The day after the event I was at work and had...

The story really involved two dead girls and a baby was born that day that was related to this mess The first girl related to the story had just been killed that morning in a traffic accident The Delrin name was the missing girl that was already dead as well Like I had said. There is a lot more to t...

bikefreek The girl was right beside my truck. I passed beside her. I could still see her eyes in my rearview mirror at 300 yards just as well at several feet When I went past her, I could see here as clearly as you can see your hand in front of your face. Nothing ever obscured her when many things s...

silencertalk Not even close We thought the girl was real and didn’t know what she was doing. I drove Kathy and Clay home directly after the event. Kathy was starting to freak out. After they were home We were talking about what we had seen. The mouth, toes, eyes and a few other things It started app...

Hush quote I've been told that's natures way of accepting death, a chemical is released in the brain to make dying a pleasant experience For the person who goes through death this maybe true but neither I nor Kathy was dying and could have no chemical release. The event happened when everything was ...