Search found 338 matches
- Wed Apr 23, 2014 5:14 pm
- Forum: Silencer Reviews
- Topic: Quietest Host for Spectre II Shooting a Bulk Pack
- Replies: 16
- Views: 4554
Re: Quietest Host for Spectre II Shooting a Bulk Pack
The Rugers and Brownings will probly be at the top of the heap for accuracy . Some of the better 1911's may place high too . I have an MKII that i use a suppressor host . It will start malf at around 1k-1.5k shot with the suppressor . And from what I've seen on friends guns that is around the "...
- Wed Apr 16, 2014 1:19 pm
- Forum: Silencer Talk
- Topic: Suppressor on a Glock 42
- Replies: 23
- Views: 23438
Re: Suppressor on a Glock 42
I shot a 42 this past sat . I wish they had made it in 9mm . With that being said it is a locked breech .380 so it should suppress well . Adding a barrel extension ( think wather p22 ) shouldn't be too hard to do . The Nano in the OP's post is a wipe / wet can IIRC . I doubt a walther P22 barrel ad...
- Tue Apr 15, 2014 10:32 am
- Forum: Silencer Talk
- Topic: Suppressor on a Glock 42
- Replies: 23
- Views: 23438
Re: Suppressor on a Glock 42
I shot a 42 this past sat . I wish they had made it in 9mm . With that being said it is a locked breech .380 so it should suppress well . Adding a barrel extension ( think wather p22 ) shouldn't be too hard to do . The Nano in the OP's post is a wipe / wet can IIRC .
- Sun Apr 06, 2014 9:40 pm
- Forum: Silencersmithing Forum
- Topic: What causes this type surface finish
- Replies: 19
- Views: 2564
Re: What causes this type surface finish
Take heavier cuts . To get good finishes at .004 or so ( that is only .002 per side ) you need a really rigid machine , sharp tooling and some tool pressure . The harder the material the easier it is to take light cuts . On a decent machine I for important parts I leave 2 passes of .01 each . cut on...
- Sun Apr 06, 2014 12:27 am
- Forum: Silencersmithing Forum
- Topic: What causes this type surface finish
- Replies: 19
- Views: 2564
Re: What causes this type surface finish
I think its a chip welding issue . Where the chip sticks to the cutting tool smearing the finish then breaks free then builds up again .
- Fri Mar 21, 2014 4:03 pm
- Forum: Silencer Talk
- Topic: Joe @ Red Jacket Introduction!
- Replies: 143
- Views: 27641
Re: Joe @ Red Jacket Introduction!
Looking forward to it .chili17 wrote:working on a review shortly. Still have a little shooting to do
- Wed Feb 26, 2014 8:53 am
- Forum: Silencer Talk
- Topic: What are you guys paying for NFA transfers?
- Replies: 50
- Views: 5565
Re: What are you guys paying for NFA transfers?
$50-100 . . . Will the ATF allow a "business" to be transfers only? :mrgreen: That would be conducting business . There have been quite a few "shops" that do that . There was one guy years ago that kept listing some MG on a site like subguns or sturm for some crazy high price . ...
- Thu Feb 20, 2014 3:40 pm
- Forum: Silencer Talk
- Topic: AAC at SHOT
- Replies: 60
- Views: 11454
Re: AAC at SHOT
Originally, there was talk about putting the serial number pm the Ranger 3's rear-most part and using a sort of sectional design to allow for future repairs without the hassle and wait of a new stamp. The new Ranger 3 pictured above seems to show the serial number on the forward section. Can anyone...
- Sun Jan 26, 2014 7:03 pm
- Forum: Silencer Talk
- Topic: Finding an antique unregistered suppressor
- Replies: 32
- Views: 5594
Re: Finding an antique unregistered suppressor
The only legal way to keep it from being destroyed would be to take it to a friendly local PD and have them do a form 10 on it . Then find one of the few museums that can accept form 10 items and have the pd either loan it to them or donate it .
- Wed Jan 22, 2014 5:35 pm
- Forum: Silencer Talk
- Topic: RJ KSG Suppressor
- Replies: 9
- Views: 2113
Re: RJ KSG Suppressor
Never have heard that . I've run a ton of birdshot , slugs and buck through the RJF integral Saiga's before . I've also shot a ton of birdshot , slugs and buck through the first KSG suppressor . One of my favorite loads to shoot in the KSG is this http://www.midwayusa.com/product/2900197404/winchest...
- Tue Dec 03, 2013 12:14 am
- Forum: Silencer Talk
- Topic: 9mm subsonic = "widowmaker"?
- Replies: 31
- Views: 9654
Re: 9mm subsonic = "widowmaker"?
will36 wrote:
That's a cool bullpup. Got to shoot a new kriss super v with 2 shot burst and fa with a new can. It was VERY fun its almost......... sort of......... if you close one eye bullpup ish.
What did you think of the can on the Kriss ? was it like some of the old ones we've seen pics of ?
- Wed Jun 12, 2013 9:44 am
- Forum: Silencer Talk
- Topic: Interesting...Texas has the most silencers by far!
- Replies: 14
- Views: 1628
Re: Interesting...Texas has the most silencers by far!
I've heard that a huge # of the DD's in the registry are flash bangs . They get used up but not destroyed , and every one is a DD on the books . If I had to make a wager I'd say that the large artillery shells and bombs/missiles for the mill are governed outside of the NFA under something more akin ...
- Tue May 31, 2011 6:31 pm
- Forum: Silencersmithing Forum
- Topic: how to find muzzle pressures ?
- Replies: 2
- Views: 810
how to find muzzle pressures ?
I've got a question on finding the muzzle pressure for .223 and .308 . The .223 is an ar with a 11.5 " barrel and the .308 has a 22" barrel .
anyone ever use a AL 9mm subgun can on .308 ?
anyone ever use a AL 9mm subgun can on .308 ?
- Tue Jun 01, 2010 1:34 pm
- Forum: Classified Ads
- Topic: MEMORIAL DAY SILENCER GIVEAWAY!!!!
- Replies: 436
- Views: 41926
Re: MEMORIAL DAY SILENCER GIVEAWAY!!!!
"MAJOR, YOU MAKE MY PRIVATES STAND AT ATTENTION!*"
thanks
thanks
- Sun Apr 05, 2009 1:41 pm
- Forum: Random Talk
- Topic: The Myth of 90 Percent: Only a Small Fraction of Guns in Mex
- Replies: 12
- Views: 534
- Wed Nov 12, 2008 4:39 am
- Forum: Legal and Political
- Topic: Gun control.
- Replies: 23
- Views: 2419
I vote no to the having to proove the or take a gun ownership test . I'd be willing to submit to a class and a test in exchange for less restrictions from the gun grabbers. Give a little, get a little. (In theory at least) there would have to be some kind of regestration showing that you passed the...
- Tue Nov 11, 2008 5:02 am
- Forum: Legal and Political
- Topic: Gun control.
- Replies: 23
- Views: 2419
N.B.C. stuff is a no go. I don't see what dropping a cloud of anthrax on a mill base would do that a load of HE couldn't do . explosives should have minamial restrictions ,and some kind of storage requirement , but I'm not sure how that could be enforced. all other firearms should be as easy as buyi...
- Mon Nov 10, 2008 5:14 am
- Forum: Silencersmithing Forum
- Topic: beretta fast attach
- Replies: 12
- Views: 1876
I just look through the can . I shoot most things with both eyes open anyway. I used an EFK berreta 93 barrel . http://i74.photobucket.com/albums/i277/bobsboobs/9mmmount.jpg http://i74.photobucket.com/albums/i277/bobsboobs/taruswithcan.jpg I need to replace my pins , as I made them too soft . its a ...
- Fri Oct 24, 2008 1:18 pm
- Forum: NFA Weapons
- Topic: "Coolest" type of FA gun?
- Replies: 32
- Views: 4473
- Thu Oct 16, 2008 2:14 pm
- Forum: Silencersmithing Forum
- Topic: lubrication for aluminum
- Replies: 10
- Views: 1403
- Sat Sep 20, 2008 3:05 am
- Forum: Random Talk
- Topic: YouTube bans knife and gun videos
- Replies: 12
- Views: 629
- Thu Dec 20, 2007 5:01 am
- Forum: Legal and Political
- Topic: what if.... all F/A bans were lifted-no special forms to own
- Replies: 66
- Views: 4218
- Tue Dec 18, 2007 4:38 am
- Forum: Random Talk
- Topic: I am Legend...
- Replies: 36
- Views: 1870
I though it was a great movie. it was along the lines of the book but very different at the same time . last man on earth is the book almost word for word , its also on youtube as its public domain. http://www.youtube.com/watch?v=SA_QtJKuAWM
- Fri Dec 14, 2007 3:34 pm
- Forum: Handgun Talk
- Topic: Carry Ammunition
- Replies: 68
- Views: 11427
- Fri Nov 30, 2007 2:31 pm
- Forum: Silencer Talk
- Topic: Hitman's silenced para-ordinance P18-9
- Replies: 25
- Views: 7366
I carry an AMT .380 backup everyday . mine the single action , the DA is know for having very heavy trigger pulls . an AL supresor with wipes in 9mm shot wet may work . and Al can be polished pretty decently . it does scratch pretty easily . http://i74.photobucket.com/albums/i277/bobsboobs/taruswith...