LOL.. Ok.. Well, We can do a lighter weight cover in 1000D Cordura Nylon. The colors are named by the Fabric supplier but you may find something close. The Velcro would be limited to Black, Olive or Beige. I'll add a color selection option to that page shortly and you can pick and choose. It would a...

Probably, As soon as I figure out what FDE means

Guy

Hi All, Our new High Strength/Heat Suppressor covers are now available. We stock the two sizes to fit our Carbine and MINI UZI Fake Suppressor CANS (Yes they can get hot). We can also make about any Length/Dia you need. I set out to design a Cover for my real Suppressors with both high heat and some...

My last 3 Form 1's on Trusts were almost 3 months to the day each. These were filed and received since Dec.

jim c 351 wrote:I believe the ATF considers any one part of a suppressor as a violation, so possesion would be count 1 and dealing would be count 2.
Jim C

Lots of suppressor companies selling mounts by themselves. No stamp needed.

A recent Form 1 WAS just denied. In thread attached below. Gotta believe it's no different than one hung on the front. It still needs to be listed as to length. Otherwise.. how's the enforcement on not making it longer (manufacturing a new one) take place ? http://www.silencertalk.com/forum/viewtopi...

If you think we have the facts now.. READ this section. " May a repair change the dimensions or caliber of a silencer? A: If alterations to a silencer would increase the overall length or change the diameter or caliber of a silencer, this is the making of a new silencer, as opposed to a repair....

I posted the above Doc to help all of us try and understand the ruling. I would list the OAL darn close to what you plan on building it as and not LONGER by more than an inch or so as allowed for end cap 'repairs". I suspect your Form 1 would be approved for 24" but they would expect to se...

. U.S. Department of Justice Bureau of Alcohol, Tobacco, Firearms and Explosives Washington, DC 20226 April 17, 2008 Frequently Asked Questions - Silencers Q1: What part of a silencer must be marked? A: The silencer must be marked in accordance with 27 C.F.R. §§ 478.92 and 479.102. The regulations...

I would submit.. They may have just come to their senses.

This was just posted for a rejected Form 1 can application due to N/A in OAL section.


viewtopic.php?t=54943

Some on here say they have been approved for MANY cans without the OAL included on a Form 1. When I applied for my first one it seemed strange NOT putting in the length when the ATF has a ruling that prohibits making a can LONGER than it was manufactured as. They indicate it can be shortened for nee...

Not sure how that would fly without a "Length" for the can ? Flew just fine 8 out of 8 times for me so far. Ranb Umm.. Wonder how they get past this if you modify it later ? "Increasing the length of the outer tube significantly affects the performance of the silencer and results in ...

How do you get around this if they don't know what length it WAS ?

"Increasing the length of the outer tube significantly affects the performance of the silencer and results in the "making" of a new silencer."

Not sure how that would fly without a "Length" for the can ?

Sent a Form 1 for UZI can on Dec 7, 09.

Check cashed Dec 28th, 09

Pending .. Beats me. ( why bother ?)

Received March 5th, 10

This was on a Firearms Trust.

Ted Cutter signed it and sent a picture ?

Must be getting better.. I ordered 2 Fingerprint, compliance and Form 1's online and received the whole packet in 5 days.