Search found 61 matches
- Sun Sep 15, 2013 8:30 am
- Forum: Silencersmithing Forum
- Topic: Subsonic twist rate ?
- Replies: 5
- Views: 942
Re: Subsonic twist rate ?
Cheer Doubloon . That`s excellent
- Sun Sep 15, 2013 4:23 am
- Forum: Silencersmithing Forum
- Topic: Subsonic twist rate ?
- Replies: 5
- Views: 942
Subsonic twist rate ?
A friend if mine is looking to build a big bore airgun . He`s thinking 7.62 and bullet weight around 125 grain . He can easily get blanks as its going to be a show piece for a gun shop. 7.62 airgun blanks are easy to get but they are designed for diablo shaped pellets 44-51 grain and compared to a f...
- Mon Aug 26, 2013 10:07 am
- Forum: Silencersmithing Forum
- Topic: .22 rimmy tester mod
- Replies: 6
- Views: 1308
Re: .22 rimmy tester mod
tilt the mill head and make those cones and see how it does! assuming you used a rotary. :mrgreen: Might do if this works quite well . just don`t want to add any length if possible and angled baffles would ether make it longer or loose a chamber . aye rotary table . slots were measure roughly with ...
- Sun Aug 25, 2013 4:32 pm
- Forum: Silencersmithing Forum
- Topic: .22 rimmy tester mod
- Replies: 6
- Views: 1308
Re: .22 rimmy tester mod
Cheers I`ll give it a go . I was thinking of angle baffles too . angle all but the very front one as that would add more length . I`m not sure what happened to my old pictures on the old thread . the only pics missing are the barrel sleeve and the outer covering which were made from pvc waste pipe f...
- Sun Aug 25, 2013 4:13 pm
- Forum: Silencersmithing Forum
- Topic: .22 rimmy tester mod
- Replies: 6
- Views: 1308
Re: .22 rimmy tester mod
You think ? I was thinking of thinning it down a bit more if this works half decent ?Capt. Link. wrote:If you thicken the web between baffles it will most likely be quieter.
- Sun Aug 25, 2013 3:48 pm
- Forum: Silencersmithing Forum
- Topic: .22 rimmy tester mod
- Replies: 6
- Views: 1308
.22 rimmy tester mod
Bit rough around the edges but I didn`t take too much care over its construction as its just a tester made with a pvc core just to see how it sounds. PVC doesn`t machine that nice and melts rather than cuts but it was free so good for a disposable tester. Its going on a short barreled 1022 so I kept...
- Sun Aug 25, 2013 3:36 pm
- Forum: Silencersmithing Forum
- Topic: Easy Monocore Build
- Replies: 46
- Views: 27439
Re: Easy Monocore Build
Nice work :) Ive made a few simple cores for rimmys over the last few years and found them to work just as good as far more complicated silencers . Over here rimmys are mostly shot with subs so maybe there is more benefit to complicated internals on HV ? I made a mate a full plastic rimmy mod years ...
- Sat Aug 17, 2013 2:37 am
- Forum: Silencersmithing Forum
- Topic: Bye bye old lathe
- Replies: 4
- Views: 979
Re: Bye bye old lathe
Hopefully will be powered up by next weekend and then I`ve got a mod to make for a .22 rimmy that I should have done 2 months ago for my mate Mick who is going to do my wiring .
- Fri Aug 16, 2013 3:35 pm
- Forum: Silencersmithing Forum
- Topic: Bye bye old lathe
- Replies: 4
- Views: 979
Bye bye old lathe
Bye bye old lathe :( http://i150.photobucket.com/albums/s112/nutshot-uk/IMG_0830_zps0164603e.jpg And hello new(er) one 8) http://i150.photobucket.com/albums/s112/nutshot-uk/IMG_0832_zpsd0c4d328.jpg http://i150.photobucket.com/albums/s112/nutshot-uk/83237346-0963-4589-8d38-c9013665d7ab_zps8fd77bd8.jp...
- Sat Jun 29, 2013 9:31 am
- Forum: Silencersmithing Forum
- Topic: Monocore integral 22
- Replies: 5
- Views: 1775
Re: Monocore integral 22
Looking good Darren Ive got to make a .22 rimmy can soon , my mates buying a 10/22 shortly . Think I`m going mono core none reflex for this one. Not quite made my mind up on design yet though .
- Fri Jun 21, 2013 1:13 pm
- Forum: Silencersmithing Forum
- Topic: DIY Hardcoat Anodising
- Replies: 6
- Views: 22195
Re: DIY Hardcoat Anodising
Are you sure you want to hard anodise type 3 ? Thats normally only used for moving parts that the cosmetic appearance doesn`t matter about . Hard anodising has to be done at low temperatures and is very hard to colour dye. All the bits you see anodised in colours is type2 anodising which is what mos...
- Mon Jun 17, 2013 4:37 am
- Forum: Silencersmithing Forum
- Topic: My first suppressor build. Done! .22lr 100% titanium
- Replies: 46
- Views: 18385
Re: My first suppressor build. Done! .22lr 100% titanium
Glad it worked well for you both :) Its like magic :lol: thing I think that is very cool is you havn`t changed the Ti colour at all just how it reflects light 8) Another finish that looks good is shot blast then anodise . Ive got a piece of tube that I did at 30 volt and its come out a really nice m...
- Tue Jun 11, 2013 2:22 pm
- Forum: Silencersmithing Forum
- Topic: Here's my bewbi iead for a .22 supressor
- Replies: 21
- Views: 5325
Re: Here's my bewbi iead for a .22 supressor
I made a .22 rimmy sub silencer using pvc waste pipe for the tube and delrin (plastic) for the core . several years later and hundreds of shots and its still working fine :) Bless our British Cousins and their innovativeness. The same creative lineage that gave us the Luftwaffe defeating Mitchell S...
- Mon Jun 10, 2013 3:23 pm
- Forum: Silencersmithing Forum
- Topic: Here's my bewbi iead for a .22 supressor
- Replies: 21
- Views: 5325
Re: Here's my bewbi iead for a .22 supressor
I made a .22 rimmy sub silencer using pvc waste pipe for the tube and delrin (plastic) for the core . several years later and hundreds of shots and its still working fine
- Fri Jun 07, 2013 5:18 am
- Forum: Silencersmithing Forum
- Topic: My first suppressor build. Done! .22lr 100% titanium
- Replies: 46
- Views: 18385
Re: My first suppressor build. Done! .22lr 100% titanium
Couldn`t be easier :) Heres a crappy wobbly vid I did anodising a ti bolt handle . vids a bit slow trying to do several things at once so I dipped a bit of 3mm ti wire in as well just to show you haw quick it is if you have your voltage set ;) http://www.youtube.com/watch?v=U7fnIT4fWqk Video set to...
- Wed Jun 05, 2013 3:46 pm
- Forum: Silencersmithing Forum
- Topic: My first suppressor build. Done! .22lr 100% titanium
- Replies: 46
- Views: 18385
Re: My first suppressor build. Done! .22lr 100% titanium
Couldn`t be easier
Heres a crappy wobbly vid I did anodising a ti bolt handle . vids a bit slow trying to do several things at once so I dipped a bit of 3mm ti wire in as well just to show you haw quick it is if you have your voltage set
http://www.youtube.com/watch?v=U7fnIT4fWqk
Heres a crappy wobbly vid I did anodising a ti bolt handle . vids a bit slow trying to do several things at once so I dipped a bit of 3mm ti wire in as well just to show you haw quick it is if you have your voltage set
http://www.youtube.com/watch?v=U7fnIT4fWqk
- Sun Jun 02, 2013 9:03 am
- Forum: Silencer Talk
- Topic: How to search the site:
- Replies: 11
- Views: 1914
Re: How to search the site:
Is it not possible to only make the search feature work for logged in members ? I would think that would get rid of 99% of spam searching. I would also encourage genuine people to join rather than lurk .silencertalk wrote: I turned search on. It now has a 120 second interval for guests.
- Sat Jun 01, 2013 6:28 pm
- Forum: Silencersmithing Forum
- Topic: My first suppressor build. Done! .22lr 100% titanium
- Replies: 46
- Views: 18385
Re: My first suppressor build. Done! .22lr 100% titanium
No prob Paul :) A bit more info just in case your anodising for cosmetics make sure you clean the part thoroughly and dont touch it with your fingers before anodising . I attach the part to a piece of ti rod then wash with washing up liquid then give it good rinse off under the tap or it will show f...
- Sat Jun 01, 2013 2:41 am
- Forum: Silencersmithing Forum
- Topic: My first suppressor build. Done! .22lr 100% titanium
- Replies: 46
- Views: 18385
Re: My first suppressor build. Done! .22lr 100% titanium
As a few of you mentioned, I am also a bit concerned about the ti to ti threads. I learned this the hard way when I was 14 (almost 20 years ago) and machined some titanium tie rods for my 250r 4-wheeler and they seized up and that sucked (I never did get them apart). Anyway, hopefully a little anti...
- Thu May 30, 2013 4:48 am
- Forum: Silencersmithing Forum
- Topic: My first suppressor build. Done! .22lr 100% titanium
- Replies: 46
- Views: 18385
Re: My first suppressor build. Done! .22lr 100% titanium
Thats awesome Love the spiral cones , very very cool
Worth anodising the threads on the caps and tube , Ti is very prone to galling on threads if you don`t .
Worth anodising the threads on the caps and tube , Ti is very prone to galling on threads if you don`t .
- Wed May 29, 2013 12:36 pm
- Forum: Silencersmithing Forum
- Topic: Posting pics
- Replies: 4
- Views: 1046
Re: Posting pics
If you open a photobucket account (http://www.photobucket.com) is easy to link photo`s . Photobucket is free. Up load picture to photobucket . Then go to your photobucket library to view your uploaded picture. On the right hand corner of your pictures there is an icon that looks like a cog. Click th...
- Mon May 27, 2013 9:20 am
- Forum: Silencersmithing Forum
- Topic: They were Giants
- Replies: 5
- Views: 1370
Re: They were Giants
Respect to Soldiers everywhere both passed and present (insert salute smile)
https://www.youtube.com/watch?v=M1wLtAXDgqg
https://www.youtube.com/watch?v=M1wLtAXDgqg
- Tue May 21, 2013 4:26 am
- Forum: Silencersmithing Forum
- Topic: Made a core for a .17 hmr
- Replies: 15
- Views: 5393
Re: Made a core for a .17 hmr
Cheers SRM She is pretty nice I don`t use it on here as most forums think its porn and remove itSRM wrote:nutshot, I like your u tube avatar! The can sounded good too.
- Mon May 20, 2013 4:00 pm
- Forum: Silencersmithing Forum
- Topic: Made a core for a .17 hmr
- Replies: 15
- Views: 5393
Re: Made a core for a .17 hmr
Crack on Fella Thats what sharing info is all aboutEnfield577 wrote:Sounds good - I may have to make one if ok with you ?
Cheers
- Mon May 20, 2013 3:33 pm
- Forum: Silencersmithing Forum
- Topic: Made a core for a .17 hmr
- Replies: 15
- Views: 5393
Re: Made a core for a .17 hmr
Tried it today and pretty pleased . couldn`t do a decibel test as I didn`t have the time to travel to somewhere quiet an open but I did a video of a couple of shots :) Muzzle blast was well tamed but can`t do much about the supersonic bullet. http://i150.photobucket.com/albums/s112/nutshot-uk/th_hmr...