Okay guys I've got my Trident 9 I really want to use on my 300BLK while I wait on my omega 300 to come in and I only have 1/2-28 mounts for it and I'm looking for a 5/8-24 fixed barrel threaded mount or either a 3-lug mount that I could use a thread adapter on so I have some way to affix my Trident ...

Well guys I have been INSANELY busy the past two years and have not been able to keep up on here or keep track of the developments with all of the suppressor manufacturers. Anyways, I am looking to pick up a .30 cal can to use on my bolt guns and AR. I used to know what the best cans were but I have...

I have a set of 2 new (front and rear or can use as 2 fronts) TG Faust Level IV Ceramic SAPI Ballstic plates, these are the large 10x12" plates. These plates have never even been inserted into a vest before. I have 2 sets of them and only need one set for myself so selling this other set. TG FA...

MICH Class IIIa Kevlar helmet, military issue, good condition (shows a litte minor wear on the camo cover/pads), $90 http://i30.photobucket.com/albums/c314/rsm688/018.jpg TG Faust Special Forces Class IIIa Kevlar vest, excellent like new conditions, has removable IIIa kevlar groin and neck protector...

Had some PM's, I do not need another .22lr can or an sks or anything like that

could use another ruger 10/22 or threaded mark/22/45 pistol though

I have some class IIIa body armor I am looking to trade, I have 3 different vests (all Class IIIa with front and rear panels, and removable neck and groin protection) and really only need 1 as I have a smaller one for my girlfriend should it ever be needed and I can only wear 1 vest at a time :lol: ...

Gas buster sold, $130 shipped for the new in wrapper bcm bolt carrier group. I paid $140 plus shipping last week.

Thanks,
Spencer

Well I bought these a week ago from bravo company with plans on building another upper then found a steal on a complete upper so I need to sell these in order to make up some money. I paid $243 shipped for these and they just showed up today. Both brand new in the package. Bravo company (BCM) bolt c...

I have a few new AR parts that I do not need. DPMS Lo-Pro upper (slick side, brand new) $85 shipped Rock River Arms front sight base gas block (taken off brand new gun) $35 shipped Bravo Company (BCM) carbine length gas tube (brand new in wrapper, with pin) $14 shipped Front sight base and gas tube ...

Okay, 1st....value for a Nylon 66 with a little minor surface rust on the barrel/receiver cover, im guesing around $100? Any specific things to check when looking at a used one? 2nd. What all are good mods for using it as a suppressor host besides a nylon buffer, any spring changes or anything? What...

rogerdemin wrote:

rsm688 wrote:It is brand new and has never even had a lower put on it.

So what you have is a lower lower? Is that anything like a low rider?? Pics???

it has never had an UPPER put on it, thanks for catching the typo

I have a brand spanking new Spikes Biohazard Billet Lower, it is complete with a Daniel Defense Lower Parts Kit, KNS Anti-Rotation pins Gen 2, Magpul MOE grip, and a Spikes stainless pistol buffer tube. It is brand new and has never even had a lower put on it. Only reason I am selling it is I just g...

SPF

Without a tailstock, any lathe is a very poor choice. Do not count on buying one for $75. Skip it and move on. Well I checked and there actually are a handful on ebay from $30-$80 right now. This guy is trying to get it out of his garage and I'm a broke college student so I am trying to do this on ...

Okay I have zero maching experience or knowledge but I really want to get started, a buddy of mine is the head machinist for the Winchester ammo plant down here and can teach me everything I need to know on how to run it and all. Anyways, I wanted to see if this would be a good lathe for gun work (a...

sorry wrong rimfire section, mods please move this to the rifle rimfire section

As the title says, I am going to build a SBR .22LR upper to use with my Kodiak TL once the paperwork goes through. Anyways, does anyone have a short barrel (like 4.5") that runs good with all ammo and a can. I want a really short barrel so I can use bulk ammo and keep it subsonic but have not s...

Get a standard 92FS barrel, send it to one of the threaders like Hoop or Tornado Tech (along with your slide). they can cut the barrel down to the correct length and thread it as with a factory length threaded barrel it looks goofy because it sticks out too far. I have one that I had done a while ba...

Sig P226 or Glock 17/34

I would pay a hundred bucks any day if it worked well and was built nice. That would save me $350 buying a bolt gun, another $200-350 for extra optics, plus you would still have hi-cap mags.

$200 shipped

can you post the numbers yet?

Major, price on a Kodiak TL and Essence please

wow my mind is fried, 4" barrel.

I have a brand new in package Lothar Walther 9mm AR barrel. It is stainless steel (black) with polyganol rifling and is threaded 1/2-28. These were custom ordered by a company that builds 9mm AR's and are not available pretty much anywhere. I am asking exactly what I paid for it $215 shipped to your...