I'm interested in the results. I have a MAMS, just haven't had time to install on my rifle. Currently sporting the SOCOM brake.

.915" is what mine measured. Hope that helps

I'll measure one when I get to the shop tomorrow. Just got a ton in. But I run surefire brakes on my 3 gun rifle

I've finally received my SFMB-556, so I've been able to look at it more carefully. Beyond the "tongue" and the 45˚ mating surface [the transition up to the widest profile on the brake], there doesn't seem to be any mounting interface. It must be an eccentric cam. It just makes me wonder w...

Got a decent order in: 556 51t brake: http://www.skarms.com/index.php?route=product/product&path=64_89&product_id=103 556 18t brake: http://www.skarms.com/index.php?route=product/product&path=64_89&product_id=104 762 51t brake: http://www.skarms.com/index.php?route=product/product&am...

Man I do not know the answer to that... I assume you have pinned the FH on the 14.5", I honestly would look at dremmeling off the pin & re pinning a MB just to save the can.

Or email Chuck Vlasek at Surefire

I have not heard the new SOCOM 762 Mini's yet, but I would assume it would sound fine on 223. You'll be good with the 14.5", I think they are talking db reduction. I know the Legacy series 762 Mini sounds very good on a LMT MWS. Been thinking of running the SOCOM 762mini on my SR-25 ECC if it e...

18T brakes
http://www.skarms.com/index.php?route=p ... uct_id=104

I just got one in for a customer, I will be sure to take him out shooting with it & report back

I have 10 556 brakes in stock:

http://www.skarms.com/index.php?route=p ... uct_id=103

The new SOCOM Mini is almost too loud on my 14.5" with XM193. I wouldn't shoot it long without ears. On my 18" its much nicer. I'm hoping to find some time to compare them head to head w/ AAC's.

Can't wait either way! Will be the first booth I stop at

From KAC, don't recall when I ordered, I'd have to check PO

A few shipped out to me yesterday...

The 14.5" shouldn't be that much louder than the 16". Now the 11" will be! I'm waiting for a few uppers to come in next week and going to build one up for myself. Going to pin a brake and not worry about F1/F4'ing something... Now that upper is heaver than their IWS 16", it has a...

Unobtanium wrote:

Kane wrote:
When mine gets back I will. It has ~10K through it

Thanks, very curious! Was it fired on an SBR, or what?

Yes 98% of rounds have been fired from a 10.5" with muzzle brake.

Should the M4-2000 be cleaned (aside from the mounting components) when used on an SBR? If so, how (assuming no sonic cleaner available)? If not, will carbon build-up when used on an SBR hurt it long-term (before the baffles burn out and it would otherwise "die" will it fill with carbon e...

We were told they "should" ship at the end of the year. Obviously they are filling .Mil contracts now

Just watch the latch... Mine is on its way back because the suppressor will come off without pushing the latch. Otherwise I've beat mine to hell on the full auto!

http://www.skarms.com/index.php?route=p ... uct_id=175

I also have a returned one, with out the box, but never installed (barrel nut still in plastic). Email me if you'd like that one, I'll cut you a good deal: [email protected]

I have few are instock here: http://www.skarms.com/index.php?route=p ... duct_id=96

What optic are you guys running on these? I'm thinking about grabbing one for a "demo gun"!

that is one awesome looking weapon you have there sir!!!

Good deal, glad they worked out for you.

imyomama wrote:Thank you Kane, got them yesterday... Installed one on my 12.5" pws.. I hope this helps with the erosion i'm seeing from my m4-1000. less than 1k rounds through it and baffles have jagged edges...

We have 2 18t Muzzle Brakes instock: http://www.skarms.com/index.php?route=product/product&path=59_72&product_id=104 thanks .. bought them both! crap .. I may need to cancel my order .. these look from the pic to be 5/8x24 ... m4-1000 is a 556 can , and 556 guns have 1/2x28 thread pitch!! p...