Does anybody have load data for subsonic rounds for this gun??

I tried the 75gr BTHP hornady and 4.9 to 5.4 grains of Trail Boss and all of them where subsonic. although it did not cycle it was extremely quiet!! I have a five inch thick block of wood that I shoot 22s into and the usually penetrate 1-2 inches but the 75gr BTHP went all the way through which surp...

If you register it as a 7.5" 223 and you put a 9" 300BLK on it it doesn't matter.....SO LONG AS IT IS NOT A PERMANENT CHANGE. Meaning that if you sell the 7.5 then you would need to notify the ATF of the new permanent upper; the 300BLK. You can have whatever uppers you want for it just th...

So I have done one SBR on a form 1 .223 with a 11.5" barrel and it is awesome!! but I want something shorter so I decided to do a .223 with a 7.5" barrel. I sent in the form a week ago and the check was cashed yesterday thus begins the wait. Now last week I was in California of all places ...

Thanks For the Info!!
I will go with the 11.5" upper

Is there a Piston operated upper available for this?

This is my first SBR and I know I will want to suppress it on occasion. It will be piston and not DI. From what I have read, piston operation has taken care of many gas regulation and reliability issues, correct? Will I sacrifice a lot of accuracy with a 7.5" barrel over an 11.5"? I don't ...

lugetron wrote:I finally found one and I just barely got a chance to shoot it.
http://www.youtube.com/watch?v=L9rtMYKyLl0

Another video if interested
http://www.youtube.com/watch?v=Dzjue1RQoeI

Here is the Kel-tec 9mm with YHM suppressor in action.
http://www.youtube.com/watch?v=QUE91SSrOlw

I finally found one and I just barely got a chance to shoot it.
http://www.youtube.com/watch?v=L9rtMYKyLl0

lugetron, looks like you're in the Rockies, you wouldn't happen to be in UT would you? And damn, what happened to your glock? Looks like Wahsatch Shooters Club. Yeah, and what's the story on the Glock? Yup Wasatch shooting range near kaysville :) and the story on the Glock is in this thread http://...

Took the new Kel-tec sub 2000 out to the range and it was Perfect!

Subsonics make a huge difference!!


http://www.youtube.com/watch?v=QUE91SSrOlw

That looks tempting, did you send the whole S2K to YHM or did you pull the barrel off yourself and send it in? What did they charge you? Thanks I removed the barrel myself and then added the 3 rails. YHM charged $60 bucks which I think was worth it knowing it was done right. I had a local gunsmith ...

Yes,
It is awesome.
329 for the gun and 60 for barrel threading from YHM
I want to buy the 40 cal and do it to that one as well.

Don't Give up on the Kel-tec Sub 2000 9MM G17

YHM threaded the barrel and it turned out Perfect!!

I have a friend that resides and works in California, who also owns a home in Arizona and has an Arizona state identification
card issued by the Arizona DMV. Will the ATFE allow him to buy a suppressor in Arizona and keep it in Arizona?
Any information would be appreciated.

ctdonath wrote: When was it made?

Late 80's.
Originally purchased by Metro Police District of Columbia

rsilvers wrote: Just make sure to replace the can before the new pistol arrives.

Which AAC can would you recommend TiRant or EVO??
Thanks

It was generous of them to replace it. When I sent it back to them I told there was a YHM can on it with an Lone wolf barrel. I even sent them these pics. Do you think the suppressor caused the malfunction? When I emailed YHM the pics they said Sir, We have never seen anything like this before. The...

Newbie first post.More of what you use to clean your suppressor stuff. I read on ar15.com something about 50/50 solution of peroxide and vinager.I think? I am waiting Form 3 on my first suppressors: YHM Phantom 5.56 and Tactical Innovations Quest 22LR. :D I just tried mineral spirits and they clean...

Mine did and it still functioned after. Glock made good and replaced it.

Beretta Steel wrote:This goes to show how good glocks are, the thing was broke in half and still worked.

Yup Yup paid 399 for a duty weapon in D.C. that must seen a lot of action. I shot it a lot too even when it did break it still function!!!!!!!!!!!
Great Gun a Glock is!!!!

Can anyone recommend a good way to clean a can? I use dupont teflon dry wax lube You may want to research this, but a year or more ago I was reading about lubricants and cooling agents for a silencer, and it said that Teflon in high temperatures was toxic or something like that. My mom always told ...

A buddy of mine asked me if he could make a video of my AR. he used footage that he shot with his new HD camera and footage I gave him from the range that day. At the end of the video you see my bro shooting with the broken Glock laying off to the side :cry: :cry: :cry: http://www.youtube.com/watch?...

When I signed up for this forum a few days ago, I thought what would be a cool picture for my Avatar.:) Any way I was visiting family for Christmas and my little brothers wanted to go plinkin. so we went to their local range and I pulled out my Glock 17. It has a YHM Cobra on it and I had some lefto...