The kit will only work with trigger groups that can use factory hammer bushings,if your trigger group has a torsion spring it will not work,if you have a newer 1022 with the bushings built in you will have to swap hammers,I used a volquartsen hammer and with some polishing now have a SAFE 1 1/2 lb.t...

Im back and kits are in stock,THANKS again to all those who ordered and waiting for years for the kits to become reallity again! Kit now comes standard with SSS ejector,custom 304 SS bushing,lock,and custom ejector pin,I did change it a bit so any aftermarket mag release will work,drops in,replaces ...

Finally after a LONG wait...kits are in stock.I went back to 2007 and sent a email to everyone I could on the waiting list,if you didnt get a email and you were on the list..I APOLOGIZE!!! Been a lot happen over the past 7 or so years,some good,so not so much.NEVER thought I would be able to say I h...

I want to THANK all my customers for waiting all these years for the kits to become reality! Its been a nightmare of sorts and a long road but I can finally say I have some in stock! NEVER thought I would be able to say that :D For those of you that have purchased the new kit PLEASE let me know how ...

If money is no object,you cannot beat BUSSE COMBAT KNIVES there INFI steel is the stuff you can bet your life on when needed,that said,there are cheaper knives that will do the job...right now im loving my becker BK7 (the old becker) these are not too pricey but hold an edge thru a lot of abuse,and ...

Yep...im jealous!!!!!!!!!NICE collection!!!! But those 1022's need bolt locks......

Ive been using and collecting knives as long as I can remember,Ive owend more high dollor knives and still do then I care to think about.If you are in the market for a survial knife give BLIND HORSE KNIVES a close look!! You can spend more but you wont get this much bang for your buck,no I dont work...

ALWAYS remember to keep one pump in these to keep seals closed..also NEVER use anything but airgun oil to lube these guns..WD40 WILL eat the seals!! Transmission fluid works great! Just my 2 cents.....

I apologize for replies from a few years ago,my machinest walked away due to being unable to keep up with the demand,had(and still have health problems,)PC got hacked and lost a LOT of emails.Yes you can try to find a lever action 1022 but since the semi 1022 IS the most modified .22 in the world,ju...

Just want to give you guys a update,the bolt lock kits are being tweaked as I type this.Its took a LONG time to get it right and I wont let it out until it is,SHOULD be testing pritotypes this week.The new kit will come standard with the SSS ejector so the user can use ANY ammo they wish.We will als...

email me at [email protected] I've been slow returning emails because of work...they are out of stock at the moment but I can put you on the list for the next run

Last wed. I dropped a groundhog at 813 yds. with a out of the box rem. SPS and a shepherd scope...yes he was lazed so I knew the distance.Ammo was federal premium 308 168 grain matchking BTHP.Longest shot I've made to date....loads of fun!

There is a guy on rimfirecentral who can do the mod and make it work AND make your volquartsen sweeter at the same time..his name is skeeter...look him up and tell him I sent you

Please post some pics of this rig!!! Looks good from what I can see!!!

I was told the locks the turn and twist behind the bolt do not have a long life when used...what is needed is a drop in kit.....we are working on that and it looks good...more to follow

It won't work with the volqartsen I've been told because it has a torsion spring in the trigger group,it was designed to work in Ruger factory trigger groups or TG's that use the 2 bushings on the hammer.As far as a the Tactical reciever or any other reciever it shouldn't matter...the trigger group ...

without the SSS ejector DO NOT use anything but subs or standard ammo or you will damage the pin or worse

If you use the SSS ammo without the SSS upgrade you WILL bend or break the JT ejector pin,next time you clean your rifle take the pin out and roll it on a flat surface..if it's bent I'll send you a new one

Artful..yous is just like the ones we make now but in order to use anything but standard or subs you MUST use our SSS upgrade.The difference in locking the bolt with the SSS ammo or any other ammo is quite a difference...with the SSS ammo it's like night and day

The SSS is known for the "pop" from the ejection port because of the short case,the JT bolt lock eliminates that..also put a magnum spring on the charging handle ...that will help also.I've not heard good things about the TI barrels,but if you do the magnum spring trick you will HAVE to us...

$60.00 plus $8.00 for basic kit....SSS upgrade $25.00

We have been trying to catch up on orders for years...we are there.Some 1022's will require minor fitting...nothing to it.I have got a lot of emails from customer saying accuracy was improved but we have yet to test this.

they are made to outlast the rifle! We have never had a customer break a lock,but you MUST have the upgrade if you use anything but standard or subs

I have some drop-in kits and SSS upgrades in stock...email me at [email protected]

As I have stated before the hardest part about making these kits is making them drop in ANY 1022.Ruger is sloppy in there design and there is a difference from gun to gun when we are talking 1000ths.Take your trigger assembly out with the kit installed and see if it works ok,if it does then a SMALL ...