So did you guys tell him to search in finnish?
Fusion 360 is free . . . get to work
Search found 706 matches
- Sun Apr 10, 2016 8:57 pm
- Forum: Silencersmithing Forum
- Topic: heeeeeelp me with 9mm
- Replies: 4
- Views: 2307
- Sun Apr 10, 2016 8:53 pm
- Forum: Silencersmithing Forum
- Topic: Extended Nose K-Baffle
- Replies: 5
- Views: 2677
Re: Extended Nose K-Baffle
Titsworth's X-caliber baffles are done this way
- Fri Oct 31, 2014 11:42 am
- Forum: Silencersmithing Forum
- Topic: Desktop CNC
- Replies: 4
- Views: 1482
Re: Desktop CNC
Very cool . . .
I think there is a definite future in hobbyist/sub $10k CNC machines.
Trying to develop a retrofit deal right now with a friend of mine for manual lathes using a tablet/wi-fi
I think there is a definite future in hobbyist/sub $10k CNC machines.
Trying to develop a retrofit deal right now with a friend of mine for manual lathes using a tablet/wi-fi
- Fri Oct 31, 2014 11:39 am
- Forum: Silencersmithing Forum
- Topic: All else equal, more baffles or less?
- Replies: 36
- Views: 30514
Re: All else equal, more baffles or less?
On standard 60* cones, I feel like closer than 5/8" spacing really starts giving you diminshed returns. Caliber/bore size/vents/clips all matter but there is weight in the idea that at some point you are greatly reducing the amount of gas coming off of the centerline and reducing the amount of ...
- Wed Jul 30, 2014 10:59 am
- Forum: Silencer Talk
- Topic: 556 can
- Replies: 6
- Views: 1228
Re: 556 can
Hello all. I am finally ready to break down and get a 556 can for my FNC. The FNC will have a thread adapter to 1/2-28, and it is full auto. The can will be used mostly semi-auto, but some full auto also. Durability? Cleanability? Mount? Any suggestions? Thanks again. Very few takeapart 556 cans if...
- Tue Jul 15, 2014 3:04 pm
- Forum: Silencer Talk
- Topic: 22 Blackbox vs 22 Osprey
- Replies: 5
- Views: 1323
Re: 22 Blackbox vs 22 Osprey
The main problem with any rectangular can is how do you take it apart?
Everyone wants take-apart pistol cans and everyone also wants the silencer to weigh nothing so the box design in and of itself just isn't practical with today's market.
Everyone wants take-apart pistol cans and everyone also wants the silencer to weigh nothing so the box design in and of itself just isn't practical with today's market.
- Wed Jun 18, 2014 9:54 pm
- Forum: Silencer Talk
- Topic: Doc Dater says ti better than steel for heat, and more
- Replies: 17
- Views: 3590
Re: Doc Dater says ti better than steel for heat, and more
Dater is usually pretty spot on except his love of 4100 series steel
Handyman got it though . . . oxidation becomes a problem when titanium starts getting really hot and most silencer guys ride them hard and put them up wet.
Handyman got it though . . . oxidation becomes a problem when titanium starts getting really hot and most silencer guys ride them hard and put them up wet.
- Wed Jun 18, 2014 9:48 pm
- Forum: Silencer Talk
- Topic: Help me find and choose a 6" (!!!) 300blk barrel - Updated
- Replies: 14
- Views: 6675
Re: Help me find and choose a 6" (!!!) 300blk barrel - Updat
what twist? 1:4????dan9591 wrote:Bender - Yeah, they want $400 but will guarantee stability using 187 and 220 grain projectiles.
Good luck getting it to cycle at 6" . . . I guess if you only shoot suppressed you stand a chance.
- Wed Jun 18, 2014 9:45 pm
- Forum: Silencer Talk
- Topic: No FRP 22 rimfire cans?
- Replies: 18
- Views: 3678
Re: No FRP 22 rimfire cans?
The element is the only can I know of where the 1st shot has a chance of being quieter than a subsequent shot FWIW.
- Mon Jun 16, 2014 6:32 am
- Forum: Silencer Talk
- Topic: Harvester or saker762?
- Replies: 20
- Views: 4666
Re: Harvester or saker762?
I'm no AAC fan boy but the XM2010 contract is still in place . . . they have to deliver Titans with the rifles or Big Green is going to have some explaining to do.MJF1911 wrote:They're probably all packing up or looking for work.
- Mon Jun 16, 2014 6:29 am
- Forum: Silencersmithing Forum
- Topic: Now available DIY felony kit
- Replies: 26
- Views: 50793
Re: Now available DIY felony kit
Given the government/ATF's inclination to outright ban things they don't like, all it's going to take is a Dorner or some hitpiece on Nightly News/60 minutes to get them to ban this stuff just like the 7n6 5.45. You keep pushing the line and eventually the unregulated and unencumbered ATF will get i...
- Mon Jun 16, 2014 6:21 am
- Forum: Silencersmithing Forum
- Topic: Dimples
- Replies: 8
- Views: 2637
Re: Dimples
If you threaded the interior of the can and the exterior of the baffles you could screw them together. Could you unscrew them apart after your done shooting? :mrgreen: AR 9mm's have terrible ejection port noise, so they sound louder to the operator than they actually are. I was quite happy with the...
- Fri Jun 06, 2014 12:35 am
- Forum: Silencersmithing Forum
- Topic: threading titanium tube for endcaps
- Replies: 26
- Views: 6164
Re: threading titanium tube for endcaps
Just FYI OP, Bendersquint is a 02/07 (correct me if I am wrong here bender) manufacturer and 99% of the time will tell someone the option that has zero chance of getting you into trouble which can be pretty good in the NFA world as the ATF is convoluted and filled with stupid law. However, if you ma...
- Thu Jun 05, 2014 7:14 am
- Forum: Silencer Talk
- Topic: Which suppresses better in SAME gun--a 3.3" or 4.1" barrel?
- Replies: 8
- Views: 1378
Re: Which suppresses better in SAME gun--a 3.3" or 4.1" barr
there's not really hard and fast rules… in general the more powder that burns, the quitter it will be. BUT, it depends on the can quite a bit- some cans perform better with higher pressure (shorter barrel) and others with lower pressure (longer barrel). You'll have to test in combo with particular ...
- Thu Jun 05, 2014 7:08 am
- Forum: Silencer Talk
- Topic: Henry no longer at SWR/Silencerco?
- Replies: 65
- Views: 9821
Re: Henry no longer at SWR/Silencerco?
When typing my post I just knew someone (dealer/rich guy) would post up that they trash their cans harder than ANYONE, etc etc. Didn't realize it would only take one post. Civilians beat cans harder than mil ever will. Really? How many silencers have you submitted for a military solicitation? The co...
- Wed Jun 04, 2014 9:25 pm
- Forum: Silencer Talk
- Topic: Brent Taylor joins the Liberty Team
- Replies: 3
- Views: 1296
Re: Brent Taylor joins the Liberty Team
I know him!
- Wed Jun 04, 2014 9:17 pm
- Forum: Silencer Talk
- Topic: Henry no longer at SWR/Silencerco?
- Replies: 65
- Views: 9821
Re: Henry no longer at SWR/Silencerco?
What I am asking for is not different requirements, which seems to be what you and Robert posted, but about "innovation" - the act or process of introducing new ideas, devices, or methods. I do not see any new ideas, devices, or methods, on any military can that the commercial market did ...
- Tue Jun 03, 2014 7:30 am
- Forum: Silencer Talk
- Topic: Huntertown Chameleon 308 anyone have one?
- Replies: 10
- Views: 3368
Re: Huntertown Chameleon 308 anyone have one?
I have been trying to get a hold of them for a week and a half now by phone, email and their automated email on the website, but unable to reach them, the dealer is jerking me around just having a horrible experience all around, the last dealer I started with was trying to charge me full retail for...
- Tue Jun 03, 2014 6:17 am
- Forum: Silencersmithing Forum
- Topic: K baffles vs monocore design help
- Replies: 4
- Views: 3469
Re: K baffles vs monocore design help
I haven't designed one nor have I seen a monocore design at the same length produce a smaller sound signature using supersonic rifle ammo than standard 60* cones (ported/clipped/whatever). The monocores I've done and others I've metered really show great gains when using subsonic ammo . . . not sure...
- Thu May 22, 2014 11:37 am
- Forum: Silencer Talk
- Topic: Henry no longer at SWR/Silencerco?
- Replies: 65
- Views: 9821
Re: Henry no longer at SWR/Silencerco?
I've worked with him in a number of capacities at various companies and I've always really liked him. That said, i have no idea of the internal goings on at SilCo. That is strange . . . I got the same impression from him. Nice guy but drama seems to follow him. Must be more than meets the eye with ...
- Wed May 21, 2014 11:40 am
- Forum: Silencersmithing Forum
- Topic: Fast and dirty monocore machined today.
- Replies: 11
- Views: 3661
Re: Fast and dirty monocore machined today.
Grounded wrote:Probably has to be filed hahaDr.K wrote:Did you build that from a form1?
- Mon May 19, 2014 1:53 pm
- Forum: Silencer Talk
- Topic: AAC closing down???
- Replies: 25
- Views: 5571
Re: AAC closing down???
I always get AAC HR notices from Kathy - who is beyond awesome, has been there for many years, and I would assume everyone else feels the same way as I never heard otherwise. Robert, I didn't mean to say AAC's "HR" to which Kathy I don't believe was listed as HR on the company flow chart ...
- Mon May 19, 2014 11:39 am
- Forum: Silencer Talk
- Topic: AAC closing down???
- Replies: 25
- Views: 5571
Re: AAC closing down???
From the perspective of the guys paying the bills, the costs are going to go down across the board, due to the centralization of engineering, shipping/receiving, facilities management, recordkeeping, etc. I don't think that's ever been the issue . . . of course it makes fantastic business sense. Ov...
- Sun May 18, 2014 1:43 pm
- Forum: Silencer Talk
- Topic: AAC closing down???
- Replies: 25
- Views: 5571
Re: AAC closing down???
douchy move.hunter2 wrote:Dedicated employees can reapply.....
Seems like a great way to get rid of an older employee's vacation and pay level
- Wed May 14, 2014 8:13 am
- Forum: Silencer Talk
- Topic: Found this on Fleabay
- Replies: 14
- Views: 2138
Re: Found this on Fleabay
"In the business of collectibles and estates for over 15 years, we love what we do"
Not for long!
Not for long!