Search found 243 matches

by Bandit
Fri Dec 02, 2011 9:03 pm
Forum: Silencersmithing Forum
Topic: Tube wall thickness and TI Grade?
Replies: 52
Views: 15476

Re: Tube wall thickness and TI Grade?

HeyPendejo Bandito,Qué chingados!!!, English translation for above-------ouch I just got mucho screwed. You Know What happens if you live with Penguins/They go on Vaca w/you..........And then El burro sabe mas que tu ,In Spades! English translation for above-------next time I will use mucho grease ...
by Bandit
Fri Dec 02, 2011 5:17 pm
Forum: Silencersmithing Forum
Topic: Tube wall thickness and TI Grade?
Replies: 52
Views: 15476

Re: Tube wall thickness and TI Grade?

Eres tan estupido como un perro = stupid as a dog you speak my language eh ? Here is one for you Pedro. vaya coma sus pastillas de vaca No need for flame wars but some people show their real colors congrats to you computer warrior. Having some humor can be good but don't let your trap over ride you...
by Bandit
Fri Dec 02, 2011 3:02 pm
Forum: Silencersmithing Forum
Topic: Tube wall thickness and TI Grade?
Replies: 52
Views: 15476

Re: Tube wall thickness and TI Grade?

OK. We know you got the tube. But where is the suppressor you built from it? Have you ever even built a suppressor? That thread is 7 months old so I guess you forgot or just failed to mention it to benefit your post. Either way it proves the point I made. I have built a couple cans before with appr...
by Bandit
Fri Dec 02, 2011 11:53 am
Forum: Silencersmithing Forum
Topic: Tube wall thickness and TI Grade?
Replies: 52
Views: 15476

Re: Tube wall thickness and TI Grade?

Yes, their website says its offered but 5 minutes on the phone and you find out thats not the case. This is the story i was told ... SnappyMaterials is a sister to another company(can't remember name) Lawrence Holdings is the other name they gave me. Tried to talk to jason but got recording all the...
by Bandit
Thu Dec 01, 2011 9:06 am
Forum: Silencersmithing Forum
Topic: Tube wall thickness and TI Grade?
Replies: 52
Views: 15476

Re: Tube wall thickness and TI Grade?

Have you ever tried calling me to resolve whatever the issues are? Have you ever sent me an email or PM to the same affect? All my contact information is on my website or available if asked. No issues to be resolved and from past experience most places prefer email to taking time for phone calls. M...
by Bandit
Wed Nov 30, 2011 2:42 pm
Forum: Silencersmithing Forum
Topic: Tube wall thickness and TI Grade?
Replies: 52
Views: 15476

Re: Tube wall thickness and TI Grade?

im the same person as before, nothing has changed. im not protecting matt, i just dont see why you are riding the guy. im sure there are reasons why he doesnt want to talk about what others are doing. that is how i see this. how can i make it up to you? glad i made you laugh today. Good nothing has...
by Bandit
Wed Nov 30, 2011 2:06 pm
Forum: Silencersmithing Forum
Topic: Tube wall thickness and TI Grade?
Replies: 52
Views: 15476

Re: Tube wall thickness and TI Grade?

i sense its you are butt hurt or something. That is so funny it took 30 minutes to gain my composure. Not even close but I bet you have more assumable things to say. Lets not post'em OK ? just because he is new to the retail side of it means nothing. There we have it. Some backround to back up his ...
by Bandit
Wed Nov 30, 2011 12:50 pm
Forum: Silencersmithing Forum
Topic: Tube wall thickness and TI Grade?
Replies: 52
Views: 15476

Re: Tube wall thickness and TI Grade?

bandit, sri has been making cans for years. because you have not seen them or know of them doesnt mean he has not been doing it. Not true, at least not under the SRI name. Being in North Houston I know most of the guys in the class III biz here. I asked 2/3 of them about SRI and they never heard of...
by Bandit
Wed Nov 30, 2011 2:17 am
Forum: Silencersmithing Forum
Topic: Tube wall thickness and TI Grade?
Replies: 52
Views: 15476

Re: Tube wall thickness and TI Grade?

Can't find G5 titanium in tubes so you have to bore it from barstock. Thats what AAC does unless they have a custom extruder but thats some big bucks, but would help justify the price on their Titan-Ti . Grade9 is generally considered suitable for pistols only You are going to want thicker than .05...
by Bandit
Tue Nov 29, 2011 6:11 pm
Forum: Silencersmithing Forum
Topic: Tube wall thickness and TI Grade?
Replies: 52
Views: 15476

Re: Tube wall thickness and TI Grade?

What specs are you looking for? -B How about what grade titanium they use ? Please tell us if you know. No such animal as 6AL-4V tubing, only way you get that is to bore out bar stock. -B Not true. Grade 5 can be had in lots of sizes including 1-1/2" OD with .065 wall. I have found .035-.045 wall i...
by Bandit
Tue Nov 29, 2011 10:15 am
Forum: Silencersmithing Forum
Topic: .750 inch O.D. flash hider Timing shims?
Replies: 8
Views: 1308

Re: .750 inch O.D. flash hider Timing shims?

Why not do it right and face off the back in a lathe till it times up good ? Presto no shim needed and nothing to get lost.



.
by Bandit
Tue Nov 29, 2011 10:11 am
Forum: Silencersmithing Forum
Topic: My 9mm Form 1 with booster
Replies: 30
Views: 14366

Re: My 9mm Form 1 with booster

I just learned that 60 degree K's are prefered for 9mm. Nice to see what others are doing. Who prefers them? -B Obviously the OP huh ? Works for him. I only seen 60 degree being used so far but only from guys doing F1's. Never implied it's the go to angle for everyone doing 9mm. Now if you want to ...
by Bandit
Mon Nov 28, 2011 10:14 pm
Forum: Silencersmithing Forum
Topic: My 9mm Form 1 with booster
Replies: 30
Views: 14366

Re: My 9mm Form 1 with booster

I did consider POI.......I machined the one notch in the piston at 12 o'clock when on my G19. I test fired a few rounds and was happy with that grouping, marking the top of the tube. I then installed a stainless screw inside the rear mount matching the position on the piston at 12 o'clock. Using a ...
by Bandit
Sun Nov 27, 2011 1:14 am
Forum: Rifle Discussion
Topic: Question about supressing the M14
Replies: 15
Views: 7222

Re: Question about supressing the M14

I use a Schuster gas plug on my bush rifle. Directions are simple and takes 5 minutes of shooting. Check out this new M14 M1A barrel just announced for using a silencer better and easier. new M14 M1A barrel for silencer It is way better than the delta adapter and eliminates any possible baffle strik...
by Bandit
Sun Nov 27, 2011 1:03 am
Forum: Silencer Talk
Topic: best semi auto 308 to suppress
Replies: 25
Views: 9933

Re: best semi auto 308 to suppress

Here's a guy who just came out with a new M14 M1A barrel that will take a silencer threaded directly on the muzzle of the barrel. He said to time the gas system and use a Schuster adjustable gas plug and it works real good. I have a M1A bush rifle I am going to have his barrel installed on so it wil...
by Bandit
Sun Nov 27, 2011 12:58 am
Forum: Silencer Talk
Topic: 9mm pistol options for a non-boosted suppressor
Replies: 20
Views: 3221

Re: 9mm pistol options for a non-boosted suppressor

Is the multimount lighter than the trident 9 ? I have a 92f and would like to use the same can on a 9mm AR upper saving $$ if I don't need the booster.




I want a mag adapter like this one. Where can I get one ?
Garrett wrote: Image


.
by Bandit
Sun Nov 27, 2011 12:39 am
Forum: Silencersmithing Forum
Topic: Tube wall thickness and TI Grade?
Replies: 52
Views: 15476

Re: Tube wall thickness and TI Grade?

Go with seamless grade 9 titanium (Ti-3Al-2.5V) for tubing. Titanium Sports Titanium Tubing Price List The CWSR is stronger than annealed and they show to have .087 wall in 1.5" OD. The grade 9 CWSR in .087 wall is rated for 120,000psi and yield is 105,000. Should be good for 308 or 223 can. They d...
by Bandit
Sun Nov 27, 2011 12:24 am
Forum: Silencersmithing Forum
Topic: My 9mm Form 1 with booster
Replies: 30
Views: 14366

Re: My 9mm Form 1 with booster

Nice first time build. Have you considered more notches on the piston to adjust for POI if needed ?
Is the cone angle on the K's 60 degrees ?




.
by Bandit
Sat Oct 08, 2011 9:42 pm
Forum: Silencersmithing Forum
Topic: Supressor Baffle Pics!
Replies: 516
Views: 188490

Re: Supressor Baffle Pics!

http://img.villagephotos.com/p/2011-10/1369816/daw%20can%20016.jpg The cross-drilled sleeves looks to have coarse threads on the inside leading me to think it is another off-the-shelf hardware store item modified for suppressor use like the reflector-esque baffle. http://img204.imageshack.us/img204...
by Bandit
Sat Oct 08, 2011 9:18 pm
Forum: Silencersmithing Forum
Topic: which one is better?
Replies: 14
Views: 3053

Re: which one is better?

I seen HTG baffles similar to the bottom pic but with a longer nose and they work good from what some guys said.



.
by Bandit
Sat Oct 08, 2011 9:12 pm
Forum: Silencersmithing Forum
Topic: Turn it down and thread it up
Replies: 12
Views: 2455

Re: Turn it down and thread it up

Got my stuff back from the SOT2. Everything got refinished with parkerizing. I am very happy how they turned out. I even got my AR15 9mm barrel shortened to 5" and refinished. Now waiting for my Ruger MKII to be threaded and refinished. http://img267.imageshack.us/img267/6007/001pt.jpg http://img690...
by Bandit
Wed Sep 28, 2011 11:16 pm
Forum: Silencersmithing Forum
Topic: Spindle bore envy(lathe Porn)
Replies: 13
Views: 1992

Re: Spindle bore envy(lathe Porn)

Cam bearings on the steady and run at slow speed should get big jobs done nicely.
Think of the huge cans that could be made.



.
by Bandit
Wed Sep 28, 2011 11:09 pm
Forum: Silencer Talk
Topic: Hells ya.
Replies: 69
Views: 4222

Re: Hells ya.

Wow we have a secret agent man here ?
I'm the pope from London and I get transfers approved in 24 hours just so you know. :lol:



.
by Bandit
Wed Sep 28, 2011 11:03 pm
Forum: Silencer Talk
Topic: Need a class 3 dealer in N. Fort Worth, TX Area
Replies: 14
Views: 2142

Re: Need a class 3 dealer in N. Fort Worth, TX Area

Here's a guy that's been classIII for years.
Steve Wayman
N. Collett Ave., Dallas
Phone: 214-841-9962



.
by Bandit
Mon Sep 05, 2011 1:06 am
Forum: Silencersmithing Forum
Topic: Turn it down and thread it up
Replies: 12
Views: 2455

Re: Turn it down and thread it up

I finished making my thread caps and dropped everything off to my C2 guy with my Ruger MKII to get threaded and everything refinished. Maybe get them back end of next week or so. I made the thread caps look like the original barrel was never altered just like he suggested. Will show more pics of fin...