Hello
its my understanding that if I wish to put another NFA upper (300 Blackout) on my already
registered lower SBR in 223 that I don't have to do anything as far as registering anything unless I get rid of the original upper .Is this still true ?

Thanks for reply's

copk9

Hello all Thought someone here might have experience with this . ... Soo here goes My dealer wants to do a transfer from one private suppressor owner to another . Question is does my dealer have to pay a transfer tax when the current owner turns the can over to him (dealer).? And YES we checked the ...

Hello all

Anyone know the minimum barrel length the Specwar will handle

I have a 7.5 in Noveske Barrel SBR .
This would be semi auto fire only

Thanks in advance

copk9

Can anyone here tell me the Shortest barrel length the Specwar is rated for.
Semi auto fire only ?

Thanks in advance

copk9

Hi Ron Just took my 16th Mod Supressor off of my SBR for 1st time in long time. Found ALOT of blue powder on muzzle brake ... I assume the supressor is dirty also. My question is can or should I clean the supressor ultrasonically ? BTW The OPS inc supressors ROCK I have 3 of them Hee Hee. PDC is my ...

Hello all

Can someone from AAC chime in on this...

Can a SR5 be used on a barrel as short as 7.5 inches ?

its a noveske barrel and stabilizes well.

thanks

copk9

Hello all I am looking to find a thread protector for My Ops inc muzzle brake/ supressor mount. For when my Supressor is not mounted. Are they all the same and where can I get one or 2 just in case i ever loose it again. Callouts are Hell on little parts and looseing them Thanks in advance and Merry...

Hi Walt You asked me what I went with . I found a Titanium QD AAC Titan and bought it. Yes the xtra mounts are expensive But it makes it easy to change calibers , and thats a BIG selling point for the SRS ...RIGHT ? Plus the titanium will keep the weight low and not affect the balance of the SRS as ...

Any one at AAC can please chime in wth their opinion and info please. Which Titan Ti to get for precision rifle (DTA SRS MAINLY) QD or thread ? Any difference in sound suppression accuracy potential etc ? And why ? I am ready to get one and a dealer has the QD TI . PLEASE ANSWER this is important pu...

Anyone want to chime in here

Any difference in accuracy on a bolt gun between

AAc Titan Ti 2011 thread model
And
AAC Titan Ti QD 2011 model

Thanks in advance

copk9

Hello all Anyone have any Ideas what supressor might be able to be used on BOTH 260 Remington and 308 Winchester (7.62 nato) ... I Have BOTH barrels for my DTA SRS and would like to use one on BOTH.. OR Would any manufacturer make a custom can bored for 260 Remington that would be as quiet etc as th...

Hello all I thought this was the place to go to ask this. What Front hand guard/rail system can I use with a 10" Noveske barrel and using the AAC 762sdn6 Suppressor and AAC mount ? Ideas , Pics , experience would be very welcome.. Also what clearance would I have between end of suppressor and f...

Hi Major I just want you to know your brothers in arms around the country are really concerned for our people in the heartland of our country.. I used to travel alot and was almost caught in the middle of a twister.. BUT what you are all going through is well just a tragedy... When you get recovered...

Hi Major

Any of the N6 cans still available ?

copk9

Hello U might be thinking of the 16th mod. its 1.1 inch longer than the 15th mod but uses a baffel stack more like the famous 12 mod... I have 2 of them and needless to say I like them ALOT. Close to 12 th mod performance , close to 15th mod in size and weight. BTW my next Ops will probably be a 3rd...

Hello I believe u may be talking about the 16th mod Ops inc supressor. It uses a 12 mod stack in a slightly shorter case. Its about 1.1 inches longer than a 15th mod which was Ops standard carbine M4 can And yes I have not one but 2 of them (16th mod) and I am VERY happy with them. Almost indistingu...

Sorry My Fault

I meant the engraving on the receiver example below.

Can

Pennsylvania defense consultants be abbreviated to

PDC

thanks

copk9

Hello everyone and happy holidays.

Before I call the ATF I thought I'd get opinions here.

Can a dealer abbreviate their name

Ie Pennsylvania Defense consultants to PDC + address.

Answers anyone ?

Thanks again I love the site and people as always.
Be safe and Happy new year

copk9

Hi Everyone 1St off thanks for all the informative replys. Not only did I get the answer that I was hoping for BUT I think this is the most prolific thread I've every started on here hee hee. Happy Holidays to all and to me for my soon to be after holiday present to MYSELF another upper (7.5") ...

Hello Thought I'd ask this here,( trust our gang) I have a Registered SBR ar15 reciever that I have a 11.5" Upper on now ,this was the length put on the form 4 which was approved by the ATF. My question is can I put another length but still SBR (7.5") on it . And basically have one registe...

Vrocco I am interested in the KRISS SBR also and will probably do it with a AAC Ti-Rant 45 as an add on... I think this might be a great pairing etc. However to address what you want, according to the TDI website having anyone but them cut it down would void the warrenty. However they stated that if...

To Robert357

DEFINATLY TRY PA DEFENSE.

I deal there regularly , you'll be happy.

Be safe

copk9

My two transfers are still in ATF hands. Both sent in 0ct 1 2008 One went pending Oct 27 One went pending Oct 28. My Last approval on a form one took Exactly 1 month from pending to approval. Just 2 weeks ago... The AFT people answering the phone when I have called have been EXTREMELY nice but readi...

Anyone ? Please chime in...

Thanks in advance

Copk9

Hi Everyone
I am going to register a MP5 Build SBR to my corporation.

Any advice on how to fill form out would be appreciated, I'd like to only do
this once.. And yes I double sided printed the 2010 form 1.

Thanks in advance for any help... I love this forum

copk9