OK then if I can take a stock of a SBS, then SBS it is. I guess I better wait until I get to Montana before I do it so I don't have to deal with the "permission" BS.
It is legal to take my form 1 suppressor across state lines isn't it?
madbear

I know the prices on these & that is why I am thinking about going with the AOW with detachable stock if possable. I think my 07/SOT will make the AOW for me then transfer it to me for the $5. But if I can't do that legally I guess I'll go with the SBS. Is there any restrictions on making a SBS ...

I was thinking about a serbu type 12 gauge with a slot or a whole in the grip that a shoulder stock could be inserted & held in place with some type tension device. Or if that was not legal maybe the grip could be placed into the butt stock & clamped in place. this would keep the original fi...

If I build an AOW can I put a "temporary" detachable stock on it? I have asked this question on another forum & got a no. I want to be clear here I don't mean a stock that would have to be "screwed" on to the receiver. I"m talking about a stock that was attached & de...

I was under the impression that the stamp to build a Form 1 AOW was $200 but while talking with some 07/sot friends that I know they said it was $5. I know the transfer fee is $5 but what is it to build one?
madbear

I'm a big fan of Ares Armor & buy from them as often as I can. Just what makes this brake so different for the others. I'm not a 07/sot, an engineer or even a machinist. I'm just a guy that love guns & I admire people that will challenge the status. Ares stood up to the ATF & is in a cou...

I didn't make the stencil I got it from Dungeon Designs. From what I understand you draw up a design on your computer & copy it to disk. You can take that to a print shop that has a laser jet printer. it takes a certain type transfer paper. You can find that on line. You have to do the stencil i...

I did it with mine. It's not fancy. I did it with a cell phone charger & some salt water. the letters did grow just a little but it still looks pretty good. You could try it on some scrap material & figure out just how big to make the stencil. Here it is a little beat up. I've been doing a l...

why not do your own. It's easy, all you need is a cellphone charger some salt water & a template. You can get the template from dungeon designs over at weapons guild. If your really creative & have a publishing program & a laser printer you can make the template yourself. There are a lot...

I am also interested in this line of designing suppressors for the 300 BLK. I have a 16" AR BLK & have a 10 1/2" barrel on the way. I would like to build a form 1 can more the SBR & am thinking of the reflex style where the can would extend back to the gas block & possibly use ...

if you get a parts kit that contains the full auto parts & have a receiver blank is it "constructive intent"?
or do you have to drill the receiver before I cross the line?
madbear

the term "assault weapon" is appropriate . the problem is not the term. it's the miss use of which is a very deliberate smoke & mirrors show by the puppet masters. it's all a game of deceit led by the master manipulator. the problem is not what they call something. the name is meaningl...

Ethos, did the videos display ok, my computer is all screwed up& I can't upload or display videos that aren't already stored on my desktop? I can't see the videos I already uploaded to photo bucket so I don't know if they are still there or what. please let me know so I don't keep sending blank ...

Ethos, I built a can for my ARs in 5.56 & hope to build one for my 300 BLK ASAP. this is the first one for me, hell it's the first real project I ever built on a lathe. it's 316 stainless, 8" x 1.5" omega style thread on & I think it's pretty quite & accurate. the only issue wi...

Ken your in the warmer part of NM. I think it was 3 years ago it was 36 degrees BELOW! here. :shock: that was the coldest recorded in the US at that time. I live at 6'500 ft in the high plains & it gets down below 0 most winters & if that's not bad enough I'm planning to move to Alaska this ...

ken, where in NM do you live? I'm from the east mountain area. I'm not a machinist but bought a grizzly lathe mill combo about 3 years ago. I built a form 1 can for my Ar15s which I'm very proud of. it's an omega style out of 316 SS. I'm not a welder either & didn't think the can was the right p...

thanks guys.
madbear

I take it that the OAL would be with the stock extended. i guess putting my pistol upper on one of my rifle lowers wouldn't be the best way to measure.
also on 4a should I put the trust or my personal info & are finger print cards needed?
madbear

this will be an 80 % lower ar 15 receiver. I am putting for the barrel length. do I need the OAL of the rifle?
madbear

I am sending in a trust & have some questions. it will be an app. for a form 1 sbr. is there a thread that will answer the following questions? #1 should I put "sbr" or "short barreled rifle"? #2 is a model # required? #3 what needs to be sent in duplicate? #4 do I need to se...

i finally got my can welded up & shot it today. it's has steped cone baffles & the whole thing is 316 stainless 8"x1.5". it is on the heavy side at 26.5 oz.s but i didn't want to make it too weak. it is the first can i have machined after only about 1 1/2 years experience with a me...

i know this is not a law forum but thought some of you might have some info about this. not asking for legal advise, just your thoughts. i just got my trust papers & i put my grandson who is 3 as successor trustee. i noticed that there wasn't any language stating that he could only be in possess...

And exactly what country is this? To say that suppressors nd suppressor design is anything other than hard science is to not understand the sciences that you are dealing with. As far as Google sketch versus solid works. You don't know much about CADD either. From where I stand you sound like you ar...

what would be the best pitch for the end caps on a 1 .5" x .065 wall 316 stainless tube and what would be the mim. length for that thread?
thanks for any help;
madbear

First off...Madbear, you have been told this several times, you have chimed in on this very discussion in the past from other users. Sorry that you didn't like the answer. You can not have extra silencer parts. You can have an adapter similar to what TROS offers and thats it. B; read the fucking qu...