SilencerTalk

We have had good luck with both Storm Lake and Lone wolf barrels for Glock. With the Lone Wolf being only $125, its a deal. They have been just as good if not better than the factory barrels in my experience. Have used them on 9mm, 40sw and 45acp.

I use our Demo Specwar 762 on a 308 bolt, 8.5" 300BLK AR, 16" 556 AR, and 16" 300BLK bolt. It is a great can. No accuracy issues that I can tell but I don't shoot over 200m. For plinking I don't see any noticeable difference in the feel of the additional 1.5", there is a difference in the suppressio...

I would recommend choosing the suppressor first, then make final decisions on the rifle parts. It will be difficult if not impossible to manipulate the QD locking mechanism with the hand guard overlapping the can. I also started with that setup in mind but opted for a shorter hand guard for easier a...

I highly recommend SWR to anyone getting into the show because they do make a quality product and they do back it up. A good friend got a Spectre II on my recommendation. He had an end cap strike on the first time out, very traumatizing. He called and the rapair was done immediately. The cause was a...

I have done quite a few Form 4's and 3's but I had not filled out a Form 1 before. I was happy to see the very detailed instructions Aaron includes with his trusts. It allowed me to complete my Form 1 with confidence that it would be error free. Didn't think I would ever need the instructions, "GUID...

What did they say when you asked them if they could do it?

A friend had light end cap strikes on his Spectre II because of a Tactical Innovations adapter. Called customer service, bam, new end cap. He got an SWR adapter which is perfect. No more strikes.

I am getting push back from old-timers saying that suppressors are useless for Coyote hunting. I have no personal experience using a suppressor on Coyote but I cannot believe that there is no advantage. Can anyone share an experience where a suppressor was beneficial while hunting Coyote? I use "old...

That ^ is why I like this forum. Thanks, Wicked and ncorry

Thanks. They said nothing is the same in the upper at all, so it would have to be a complete upper.

I know that the 5.56 converts to 300BLK with just a barrel swap but with the 25 WSSM not so much. I do know that I will need a new BCG but I have conflicting opinions as to weather I can use the same upper or not. Some have said that the barrel extension is different so a 300 blk will not fit. Anyon...

Inconsistency is why it is horrible. The label should read "contains some subsonic rounds".

Remington Subsonic are HORRIBLE!

I've been thinking of moving my reloading bench out from the wall like a T so I will have access to both sides. It is 48"x36" with a shelf below. Right now I do not get the best use of the entire space and stuff on the shelf gets covered up. Im pretty new to reloading so I still use coffee cans for ...

Thanks. We are currently discussing 44rm and 300 blk.

I ordered some MBC 140 grain TFCP http://www.missouribullet.com/results.php?pageNum_rsCWResults=1&category=5&secondary=9 I want to reload subs for 16" Handi rifle. Anyone used these or have a suggestion for any of their other .38's? I have Trail Boss, Bullseye, LIL Gun and IMR 4227. Since the world ...

Torch. I am waiting on my Specwars and Sakers but I think that the most bang for the buck is definitely the Torch, for threaded. There is also a Titanium version out now, if you are $x2 worried about weight. It is just about 1/2 the weight of the original.

He did mine and I highly recommend him. Fair price and got it done, then shipped to me very fast.

Aaron just sent my Trust paperwork, we got it worked out and delivered in about two weeks. It also comes with a simple instruction book. We finally have a trust attorney in KY that charges a fair price for a trust! I definitely recommend Aaron.

Optics Planet. My wholesale price usually isn't much lower than their regular sale price.

I still love mine. It took me a while to get it apart last time, though. I let it go a few hundred rounds to far before cleaning. One of the selling points for me was the video showing how to take the TL apart on Liberty's website. If a manufacturer trusts his product enough to tell me I can beat i...

I figured that a +180 grain rifle bullet will a little to heavy to travel that distance without a +20" drop and a pistol round probably has to poor of a ballistic coefficient. I was hoping that someone knew about an extremely efficient 90-125 grain rifle round that could get to 200 with enough energy.

Is there a subsonic round that can easily kill a Coyote at 200 yards? I am trying to figure out if there is a sub round that can reach that far, still have plenty of energy for a clean kill but not have a huge drop to deal with. Thanks for any suggestions.

I just cleaned my TL for the first time last week after one year and well over 5k rounds through it, I did take it apart a few times just to inspect. I had no problem cleaning it at all. It cleaned up perfectly with a little help from the dip and a dental pic. I think I will clean it around 2k round...

As long as the serialized tube is in good condition you may want to check with the original manufacturer or a different manufacturer to see if they will update the baffles or core for you. I think, then you submit a form 5 for permission to send the can off for repair.