I have loaded m80 ball 2.08 oal with 17gr of h110 and m118lr 2.022 with 15.2 of h110. Using good optics and bags as a rest. I have 110 t tsx 125 nosler 125 TNT and 130 t tsx but haven't loaded for those yet.

I was wondering if you guys would share some of your accurate loads. I am having no luck with accuracy in the 300blk. I use H110 powder.All have been shot out of an AR 16" barrel. Any help would be appreciated.

For a good paper punching load I use 147gr surplus bullets that I bought from hi tech ammo. They are cheap and fun to shoot with low recoil. I am a single stage user as of now but I will soon go progressive bs of the amount of 300blk and 223 I will be loading in the near future. 300blk is addictive ...

I was bored. So here ya go. Dont know what powder it is but it was loaded with 8.7gr.

The gas block waf too far forward a thousandth or so and I had part of a copper jacket in the gas port of the barrel. It functioned all but the 16gr 147fmjbt loads.

I got it running now. Shoots awesome. Just need to find time to spend some time at the range.

Good luck. Hope everything goes as good as possible.

Thanks for the input. As of right now mine won't run anything so I'll start with the gas port and go from there.

Stag Arms Upper and Lower Magpul ACS stock RRA 2 Stage Trigger Troy TRX Extreme Forearm AR Performance Barrel (Only BC I didnt know Aaron existed at the time) Leupold Mk4 2.5-8X36 MRT M2 TMR with Larue Mount Chrome BCG Brakeout 51T Magpul AFG2 Assembled by a local gunsmith. Also 147gr were loaded at...

Well it was very unsuccessful. It started out as a single shot and by the time I was done it would function 2 rds and not eject the third. I was using 125tnt with 18gr of h110, 147 fmjbt with 16,6.5, and 17gr of h110 and factory rem 220 subs. 16" barrel with carbine gas system and standard buff...

I have a set if you want to use em.

Thanks, I hope it shoots good.

Stag Arms Upper and Lower
Magpul ACS stock
RRA 2 Stage Trigger
Troy TRX Extreme Forearm
AR Performance Barrel (Only BC I didnt know Aaron existed at the time)
Leupold Mk4 2.5-8X36 MRT M2 TMR with Larue Mount
Chrome BCG
Brakeout 51T
Magpul AFG2

What charge you think I should go with?

Think 4227 would work

Anyone have any sub load data for 175 smk's?

Any idea of oal for these? Especially consider the cannelure placement. When I seat them to a possible proper length the cannelures are outside the case. Does that matter?

Thanks Aaron and thanks brad. Brad, we spoke through email quite a bit last week about the 175gr otm's. Please let me know when they come in. I gotta have some. Don't sell all of em to Aaron.

I have several 180gr soft point and 150gr Winchester silvertip bullets I have a need to load. I am looking for data for these using either h110 or IMR4227. I am us an AR platform with a 16" barrel with carbine gas system. Mostly supersonic but would like some sub sonic data for the 180's if it ...

If anyone needs a set of Forster 300aac dies let me know. Ups just dropped them off but I already have a set. Apparently I didn't cancel the order. Pm me if anyone wants them.

I have ordered twice from brad and all of it has arrived very quick and all of it is in excellent shape and works perfect. Thanks to a good group of guys brad and that guy that lives in Arkansas.

Good thing I got em cheap

I picked up a couple hundred cheap. Just wanted to make sure they won't affect anything with just shooting a few

I noticed you used moly bullets. Is there any disadvantage to shooting moly and later shooting non moly?

Pm me I have some data