pierre1631 wrote:I have 3 AAC 51T 5.56 blackout flash hiders in stock. $99 delivered via Priority Mail no uncharge for a CC. Email me at [email protected] first 3 "I'll take it" emails gets it.

I'll take one.... email sent

Jason

I looked at the specs for the mini7 on the AAC web site and it only listed data for 300 BLK...is it rated for 308 win? I am interested in using it on an 18" JP rifle with hot 110 vmax, 155 AMAX and 175 SMK loads. Will the can take that kind of rapid fire abuse? Thanks for any help in advance.

Thanks...cleaning the booster spring right now.....as for the ammo...I checked checked sizing....good there. Next, I am going to try some higher power rounds to see if that helps.

Does anyone have any idea why I would have cycling issues with my XDm 45 525 pistol? It does not happen all the time. The pistol will cycle just fine for part of a mag then will start to not go fully into battery. Here is some background. First, I added a Bar-Sto threaded barrel. The gun works perfe...

I have a TI Rant 45 and an FNP45 Tactical.... I took it out to fire off a couple of shots before I did my weekend drills with my 1911. I ended up shooting 300 rounds through the TI Rant (dry) without hearing protection....only ended up putting about 50 rounds down range from the 1911..... the TI Ran...

Has anyone compared the performance of the AAC brake against anything else out there? I am interested in using it on a 18" JP LRP-07 for competition but adding my 762-SDN-6 can when not competing. Competition limits brakes to 1" x 3".... I think the AAC brake is closer to 3/4" x ...

To date, I have not had a more reliable shotgun than the Benelli M4. I have put more than 6000 rounds through the gun of every sort without a problem....and I don't clean it more than wiping down the outside of it once in a great while. The only real problem with the gun is the round capacity. Until...

very nice. Can you advise barrel length and handguard length/make? That looks like a perfect fit - just enough barrel to work the suppressor mount and no more. 8" Noveske with an AAC Brake on it.... (the AAC flash hider should be renamed the "Tuning Fork" because anything that touche...

Dont worry too much about the 110VMAX not hitting the lands. Here is a 20 shot group (hand loads) I shot at 100 yards with a scope from a rest. The rounds are accurate.... note this group was not shot with the Aimpoint currently on the gun (I cant see that well anymore). https://files.me.com/jasonde...

I have seen some/and read about some reliability issues with the new Surfire mags....dont get me wrong, they are great mags when used within design specs.... you can always use a coupled set of Magpul mags...ultra reliable, less $, and you can do a 1 second reload if practiced. https://files.me.com/...

Here you can see the product of a Noveske build (FINALLY got the form 1 back). Everything on this weapon is top notch and rugged enough to take anywhere and survive anything you put it through. It shoots around 1 MOA with hand loads (have not tried the factory stuff yet) and I have about 500 rounds ...

The Vortex PST 1-4 comes withe either an MOA or MIL reticle.....it is a very good scope that can be used to address bullet drop. One look at this scope and you will be convinced....great glass and a great reticle.

8" Noveske barrel. These may go supersonic in longer barrels, but stayed subsonic in my 8" barrel and shot better groups with all loads than other lengths and powder weights did from my barrel. 208gr was a toss up in group size from 10.5gr and 11.2gr with both having 3 rounds in almost on...

8" Noveske barrel. These may go supersonic in longer barrels, but stayed subsonic in my 8" barrel and shot better groups with all loads than other lengths and powder weights did from my barrel. 208gr was a toss up in group size from 10.5gr and 11.2gr with both having 3 rounds in almost on...

loki*hunter wrote:I talked with the BATF today after I sent in my Form 1 packet (Trust) and she advised me 3-4 months......really?....really? The clock is now running and I will update this thread at each step....just in case anyone is morbidly curious.

Just got my stamp today....signed on the 24th of Sep.....

Got my mold Thursday. . . http://i79.photobucket.com/albums/j154/L1A1Rocker/245gr300BLK.jpg http://i79.photobucket.com/albums/j154/L1A1Rocker/245gr300BLK2.jpg They are averaging at 245 grains. Ok you have my attention. Tell me again, these bullets to shoot out of an AR and feed reliably. Can you te...

I am curious how long the AAC to dealer takes these days. Assuming the can is in stock....what is the reasonable range of time? Thanks for any help. Form 3's have been rediculous this year, I've seen some go 5, 6, 8 weeks... Only gonna be worse this fall with Michigan becoming legal. OK so if I put...

I am curious how long the AAC to dealer takes these days. Assuming the can is in stock....what is the reasonable range of time? Thanks for any help.

Never heard of them until I came here. They look purdy, but also very pricey. Why are they worth 3x the price of a generic AR? http://noveskerifleworks.com/ Noveske is worth the money...for a number of reasons. Their products are better, there customer service is better and their overall value is b...

I like the tshirt idea but with a wear warranty (it gets wore out and it gets replaced LOL). I have a collection of mil challenge coins and dont know what I'd do with another one. Well hold on there.... the worn out shirt shows you have had the can for a while.... not just a newbe..... a badge of c...

JasonAAC wrote:How about challenge coins that are actual-size endcaps?

Definitely a good idea!.... there are all kinds of coins out there.... make the coin from an end cap.... then you have something.

DPMS? ARMALITE? KAS? RRA? etc......... Please explain why and the pro's and cons......... I ask b/c I want one but am new to the AR10 platform and have been told they are not all compatible liek ar15's. Thanks. :wink: I didn't get a chance to read the entire thread but my vote would be for my JPE L...

For what it is worth, Midway just got their LEE Crimp dies in as well.

All,

I just got a call from LE Wilson. They have case gauges for the 300BLK available at the following link:


http://www.lewilsondirect.com/cartridgecasegage.aspx

:roll: I just checked with the very nice lady at ATF about my Form 1 that went "Pending" on 3 Jun..... she said it would take between 4-5 months from the time it goes pending. I have a Trust and there are no issues with mine so far???? What gives. According the the many tracking sites out ...