KAC Sr25 ECR -Brand New, never fired except for test target at KAC -M110 Flash Hider installed and can accept M110 Suppressor. -Magpul MIAD Installed. -Includes 1 20rd Magazine. -Basically comes with everything that would come with a brand new rifle... -Ships from my FFL to yours (I will cover shipp...

https://www.boltcarrier.com/product/kni ... arrel-nut/

boltcarrier has some now...

The M110's have the .750 diameter from the gas block to the threads. The Mk11 Mod 0's are .750 at the gas block journal but have a step down to about .730 which is why they can't be threaded to 3/4-24. The Mk11 Mod 1's made for the USMC feature the same barrel as the M110. Here is a link to TOS wher...

you think I could give them a call and try to spec out the barrel? Just go to their site. Find the M110 barrel and fill out the "options" portion. They'll give you a quote and you're ready to go. i did that and the options give you .850 at the gas journal. The m110 spec is .750 from the g...

you think I could give them a call and try to spec out the barrel?

anyone know of an equivalent m110 barrel that I could use for an M110 clone? i have all the parts but the barrel. I have a special edition ECR on order as well. want to be able to run my m110 suppressor as well.

thoughts?

i've had one on order with Lawmens since Feb. hope to see it next year...

Nevermind! Sold the top half... So if you have a complete URX 3.0 and want to sell it please email me! Thanks...

Let me know if you have a spare URX 3 bottom rail. I'm working on a custom build and only need the bottom of the rail. I know this is a longshot but thought I would reach out. I will also consider a full URX 3 as well.

If you have a pair that you are willing to part with shoot me an email. I can paypal immediately!

Knight's Armament P/N:98474 200-600 Meter Flip-Up Rear Sight Brand New. Taken off an older SR-15 of mine. $145 Shipped via USPS Priority. PayPal gift or add 3% Only trades will be for a set of front and rear Magpul MBUS Pro's or a great condition Daniel Defense MK18 rail in FDE. http://www.operation...

PM sent...

I used a propane torch... like the plumbers do... The upper and URX are Cerkoted and the coatings held up just fine so I'm assuming there is no damage. I did notice that the barrel seems to fit quite loose in the upper. Never noticed this before as I did not build the upper and would have no idea if...

So my armorer uses red loctite... I removed my URX II from the upper / barrel but it took quite a bit of heat from the blowtorch. Should I go ahead and get a new upper receiver due to the heat applied? I'll be sure and use the blue from now on now that I have a URX wrench at my disposal... Pics to f...

Agreed... Can't seem to find one lately...

Would like to pay around $130 for a good used one...

This model: http://www.operationparts.com/kac_Knigh ... /25682.htm

NOT the NVG one at this time however if you have one of those as well... I could be interested!!!

Want to buy: KAC T-1 Mount P/N: 25682

PM me if you have a lead on one. Thanks!

had to use the emergency procedure prescribed by surefire to get it off... undid the lockring and shot it off.... went about 20 feet into the grass.

So just shoot it... Get it hot andbit should break the bond? Its on there rock solid.... Im assuming the heat will expand the metals and break it loose?

My fa556 is locked on my muzzle brake and i cant get it loose! I got the lockri g off but cant get the actual can to budge. This is after running a Magpul class so its got lots of rounds through it!

Any ideas on how to get it off???

Yeah, that's what I think happened... I think the cerakote guys were afraid to drive the pin in very far for fear of it contacting the bCG. Snt you a PM about the wrench.

Forward assist blew off when shooting the other day. The roll pin must have had some issues. The MUR was cerakoted and therefore the FA was taken off. I guess it was not reinstalled correctly. The cerakote voided the warranty so i guess i am out of luck... They may fix it but it will be on me. Pics ...

I sold my URX wrench and now need one to remove a broken Vltor MUR upper from a URX III... Anyone have one they will let me borrow / rent? I will of course pay for shipping and whatever you think is fair for using it for a day.

I was able to source one from a member here... Sent the payment yesterday so should be seeing it sometime next week. Thanks to those that replied and PMd me.

Looking for a used sr15 e3 iws... The Mod 0.... Original sr15. (Already have a mod 1) let me know if you have one for sale...

I would be happy with just a mod 0 upper as well...