Search found 26 matches
- Tue Feb 10, 2015 11:46 am
- Forum: Silencersmithing Forum
- Topic: Min diameter for 22lr monocore?
- Replies: 10
- Views: 2872
Re: Min diameter for 22lr monocore?
I made a 1.5" monocore for my 77/44 on a east german hobbymat lathe with 0,5" spindle bore. No worries at all. No need to thread the tube.. My suppressor was only 3parts.. a stainless monocore with just one chamber that threads into a 7075 monocore and a 316 stainless pipe as tube.. My lat...
- Sat Oct 18, 2014 4:29 pm
- Forum: Silencersmithing Forum
- Topic: 3D Printed MonoCore - I (Pics heavy !)
- Replies: 17
- Views: 7839
Re: 3D Printed MonoCore - I (Pics heavy !)
Why don´t you print a mono core with integral cones ? You could print designs that are a lot better than that. Also, you could print designs that are impossible to mill.
For 22lr you could print the entire suppressor with a really course thread, and the just make a thread adapter for the gun.
For 22lr you could print the entire suppressor with a really course thread, and the just make a thread adapter for the gun.
- Mon Aug 19, 2013 5:02 pm
- Forum: Silencersmithing Forum
- Topic: 44 mag monocore
- Replies: 49
- Views: 14695
Re: 44 mag monocore
Long time, no update, I did as suggested, and milled away the first slanting baffle after the stainless blast baffle, and then i bedded the action with epoxy and carbon fibre, Now the gun shoots 2moa groups at 100m with subsonic 300gr bullets! And it´s more quiet than before! ( more volume i guess) ...
- Sat Dec 15, 2012 5:32 am
- Forum: Silencersmithing Forum
- Topic: nylon baffles
- Replies: 21
- Views: 4805
Re: nylon baffles
Parker-hale made a 22lr suppressor with nylon or delrin monocore, not super quiet but perfectly working. It was kind of simple, just 2 threaded Alu caps, Alu tube and a monocore plastic baffle with big holes in it. Nice for UK, finland, norway and countries where suppressors are not registered. It w...
- Tue Oct 09, 2012 6:43 am
- Forum: Silencersmithing Forum
- Topic: 44 mag monocore
- Replies: 49
- Views: 14695
Re: 44 mag monocore
Thanks Gunny50! I will build a new one or make an integral, when i find the time, but it´s not a bad idea to try and mill away some of my baffles, accuracy cannot get worse and it will be interesting to hear if it gets much louder or perhaps quieter!! Soon i will have lots of time because i´m quitti...
- Fri Sep 21, 2012 4:16 am
- Forum: Silencersmithing Forum
- Topic: Advice request for .17Mach2 suppressor
- Replies: 4
- Views: 1011
Re: Advice request for .17Mach2 suppressor
I have a friend that has a dedicated 17hmr can, with k-baffels in aluminium, the first baffle gets eroded. but his can is huge compared to yours. i think it´s 1.5" od and 8" long, but its very quiet, if you just make the first baffle in stainless with a smaller bore, i think it will work g...
- Tue Aug 21, 2012 8:08 am
- Forum: Silencersmithing Forum
- Topic: 44 mag monocore
- Replies: 49
- Views: 14695
Re: 44 mag monocore
All loads are key-holing at 50m both 250 and 300gr i get 20" (groups!?) when the suppressor is off, it shoots 1-2" groups with the same loads at the same distance, I have shot 50 rounds through it, but i think it will go on the scrap heap! I will make a new monocore for it, or perhaps go i...
- Tue Aug 21, 2012 6:49 am
- Forum: Silencersmithing Forum
- Topic: 44 mag monocore
- Replies: 49
- Views: 14695
Re: 44 mag monocore
Update on this project, I have remove some more metal and machined for O-rings on the front and rear, Now the can was really quiet... But accuracy is really bad. Something is wrong, but i couldn't see any signs of baffle strikes. I made the bore bigger from 11,5mm to 12mm and the accuracy still is b...
- Sun Aug 05, 2012 1:58 pm
- Forum: Silencersmithing Forum
- Topic: Internal pictures of 77/44 integral supressors ?
- Replies: 21
- Views: 3652
Re: Internal pictures of 77/44 integral supressors ?
I guess that the barrel is not free floating in that design. That/s the biggest concern for me when thinking of doing a integral on min, i would need to pu a custom stock on it to make the 1.5inch tube free floating.
What kind of accuracy do you get out of toms design?
What kind of accuracy do you get out of toms design?
- Fri Jul 06, 2012 6:39 pm
- Forum: Silencersmithing Forum
- Topic: BEST SOURCE FOR FAST TWIST BARRELS
- Replies: 24
- Views: 2181
Re: BEST SOURCE FOR FAST TWIST BARRELS
http://www.lothar-walther.de/3.php
http://www.border-barrels.com/border.htm
not in the us, but they will make them. those two are very accurate as well
http://www.border-barrels.com/border.htm
not in the us, but they will make them. those two are very accurate as well
- Fri Jun 29, 2012 5:50 am
- Forum: Silencersmithing Forum
- Topic: Thoughts on adhesive for 22 suppresors
- Replies: 26
- Views: 4374
Re: Thoughts on adhesive for 22 suppresors
You can always buy or make a special tap for threading the tube on the lathe, it speeds up the process a lot. With a floating holder for the tap its fast and easy.
- Thu Jun 28, 2012 7:42 pm
- Forum: Silencersmithing Forum
- Topic: Thoughts on adhesive for 22 suppresors
- Replies: 26
- Views: 4374
Re: Thoughts on adhesive for 22 suppresors
A note on adhesives, epoxy made for laminates are much stronger and cheaper than loctite. I have built a couple of windsurf boards, and epoxy with glass or carbon cloth is very strong, but its sticky, allergenic and time-consuming to work with. You could wrap the entire suppressor and endcap with a ...
- Wed Jun 27, 2012 6:58 pm
- Forum: Silencersmithing Forum
- Topic: 44 mag monocore
- Replies: 49
- Views: 14695
Re: 44 mag monocore
Thoose shots were 250gr swc+ 5,5gr titegroup. The backstop is a very thick rubbersheet over sand whichmakes a lot of echo and sound. Since it was at 20m the it sounded like it was from the gun in the video.
300gr + 7gr of vv N340 was more quiet with a bit more recoil.
300gr + 7gr of vv N340 was more quiet with a bit more recoil.
- Tue Jun 26, 2012 12:09 pm
- Forum: Silencersmithing Forum
- Topic: 44 mag monocore
- Replies: 49
- Views: 14695
Re: 44 mag monocore
Went to the range.. it´s not super-quiet, but perfectly comfortable without ears the tone is kind of sharp. the cellphone dosent catch the sound very good.
VIDEO!!
http://s54.photobucket.com/albums/g119/ ... ent=44.mp4
VIDEO!!
http://s54.photobucket.com/albums/g119/ ... ent=44.mp4
- Mon Jun 25, 2012 4:07 am
- Forum: Silencersmithing Forum
- Topic: should i thread a suppressor or weld it to the barrel?
- Replies: 19
- Views: 3179
Re: should i thread a suppressor or weld it to the barrel?
If you are in the U.S i would get that barrel threaded or buy a threaded barrel, so u could use it on other guns. this http://www.brownells.com/mobile/aspx/search/product.aspx?pid=41591 and a 24x1.5 tap would be a easy place to start, but would cost you as much as a suppressor in the end. Who would ...
- Sun Jun 24, 2012 4:47 pm
- Forum: Silencersmithing Forum
- Topic: Update on suppressed 32 acp
- Replies: 7
- Views: 2288
Re: Update on suppressed 32 acp
Nice Work! did you mill everything on a lathe? Does that 303 barrel have fast twist( 1-10" or faster) so you could use really heavy bullets? like 200gr, but then you would need a bigger case than 32acp, 357 necked down to 311 or 7.62*39
- Thu Jun 21, 2012 6:47 pm
- Forum: Silencersmithing Forum
- Topic: 44 mag monocore
- Replies: 49
- Views: 14695
Re: 44 mag monocore
Almost done... Didn't like it though... it´s way too long with the suppressor on! Turning the tube on my lathe without a steady is kind of tricky... http://i54.photobucket.com/albums/g119/hossor/10.jpg made a standoff for the barrel in stainless, because the barrel thread is to long http://i54.photo...
- Thu Jun 21, 2012 12:44 pm
- Forum: Silencersmithing Forum
- Topic: 44 mag monocore
- Replies: 49
- Views: 14695
Re: 44 mag monocore
Done the stainless milling, Ohboy, it´s scary the vibrations with a 15mm endmill! made a wrong turn on the y-axis when i made radius cuts with a 10mm mill, but it will probably be strong enough anyway. Can post a video next week from the range! http://i54.photobucket.com/albums/g119/hossor/7.jpg com...
- Wed Jun 20, 2012 5:40 am
- Forum: Silencersmithing Forum
- Topic: 44 mag monocore
- Replies: 49
- Views: 14695
Re: 44 mag monocore
Yes an indicator would help! thought they were more expensive than that. I have a friend who own a complete machine shop, but i don´t want to bother him all the time with my projects, If i want to do something nice and straight, i take a drawing to him. i have no drawing for this, just some notes on...
- Tue Jun 19, 2012 6:20 pm
- Forum: Silencersmithing Forum
- Topic: 44 mag monocore
- Replies: 49
- Views: 14695
Re: 44 mag monocore
Almost done with the ALU part http://i54.photobucket.com/albums/g119/hossor/6.jpg I think i will probably be low on internal volume, but i can always make a do-over an make an integral. Wolf, I have the vise at an angle, but i have to shift the vise when i turn the part to mill the other side... Tha...
- Tue Jun 19, 2012 3:24 pm
- Forum: Silencersmithing Forum
- Topic: 44 mag monocore
- Replies: 49
- Views: 14695
Re: 44 mag monocore
Thanks for all tips! Bought a milling chuck today.
I have almost exactly that mill drill, i have this one
http://www.jula.se/borr-frasmaskin-550-w-255011
Will update later tonight
I have almost exactly that mill drill, i have this one
http://www.jula.se/borr-frasmaskin-550-w-255011
Will update later tonight
- Mon Jun 18, 2012 6:43 pm
- Forum: Silencersmithing Forum
- Topic: 44 mag monocore
- Replies: 49
- Views: 14695
Re: 44 mag monocore
Thanks! yes, carbide will break like glass on my mill! I´m running it @1300rpm Too much? too little? Just to clarify, i have the proper permit to do this in sweden, you need a permit for each weapon and suppressor and it´s about $30 for each permit. You just write "homemade" for mfg name. ...
- Mon Jun 18, 2012 5:49 pm
- Forum: Silencersmithing Forum
- Topic: 44 mag monocore
- Replies: 49
- Views: 14695
Re: 44 mag monocore
Updates... warning! examples of ugly machining will follow below! Milling is bad on this machine, it vibrates, and even moves sometimes, i have better bearings for it, but its hard to take apart... http://i54.photobucket.com/albums/g119/hossor/4.jpg One side of the ALU part is milled, going to mill ...
- Tue Jun 12, 2012 1:13 pm
- Forum: Silencersmithing Forum
- Topic: Silencer for Black powder revolvers/carabines
- Replies: 15
- Views: 4872
Re: Silencer for Black powder revolvers/carabines
I always envy the germans/austrians/other europeans who can have as short a rifle as they wish and it´s just another simple rifle to them.[/quote]
In Sweden hunting rifles must have 45cm barrel and shotguns must have 47cm barrel. Finnsih gun laws are alot better
In Sweden hunting rifles must have 45cm barrel and shotguns must have 47cm barrel. Finnsih gun laws are alot better
- Mon Jun 11, 2012 6:28 am
- Forum: Silencersmithing Forum
- Topic: 44 mag monocore
- Replies: 49
- Views: 14695
Re: 44 mag monocore
I originally bought the rifle with the intention to make a integral. With. 1.5" ss. I got.
But there are some peculiars in swedish gun laws, a hunting rifle must have a 45cm or longer barrel which will make an integral long if i dont permanetly attach the tube or monocore.
But there are some peculiars in swedish gun laws, a hunting rifle must have a 45cm or longer barrel which will make an integral long if i dont permanetly attach the tube or monocore.