Search found 54 matches

by cpatterson86
Sat Nov 22, 2014 12:04 pm
Forum: Silencer Talk
Topic: Where to find 1/2x28 and 5/8x24 stuff... to fix 51T?
Replies: 16
Views: 1160

Re: Where to find 1/2x28 and 5/8x24 stuff... to fix 51T?

A buddy with a 9" and 51t, a different N6 - three shot groups yielded 2 tight and a flyer almost every time. At 100 yards it put 4 into the 10 ring and 1 four inches down and a couple inches to the right. Can't say for sure what is going on with that gun yet, but it appears to be a certain amount o...
by cpatterson86
Fri Aug 01, 2014 12:21 pm
Forum: Silencer Talk
Topic: Silencerco shotgun suppressor
Replies: 54
Views: 3746

Re: Silencerco shotgun suppressor

Well that answers the physical question, but seems to further open the can of worms that is the legal question; are these shorter rods not then 'silencer parts' according to the ATF rules? Would that not preclude their purchase without extra tax stamps for each rod or set of rods, or even eliminate...
by cpatterson86
Thu Jul 31, 2014 3:21 pm
Forum: Silencer Talk
Topic: Shooting 9mm through a .45 suppressor
Replies: 6
Views: 1600

Re: Shooting 9mm through a .45 suppressor

Is there a big difference in sound suppression between using a 9mm suppressor (Osprey, Octane, TiRant) on a 9mm pistol (P9S, SIG) and using a .45 suppressor on a 9mm pistol? Ammo used: Fiocci 147gr sub sonic I have first hand experience with all of the ones you mentioned and the 45 can on a 9mm hos...
by cpatterson86
Thu Jul 31, 2014 3:19 pm
Forum: Silencer Talk
Topic: Trouble removing piston in AAC TiRANT 45
Replies: 3
Views: 588

Re: Trouble removing piston in AAC TiRANT 45

I'm having trouble removing the ASAP/piston from the back of my early AAC TiRANT 45 (2-digit serial) silencer. In videos and the instructions, it makes it seem like you just twist it off, but mine won't budge. I've never had it off before, and it's had a few thousands rounds through it, so it may b...
by cpatterson86
Tue Feb 18, 2014 10:19 pm
Forum: AAC
Topic: 762 -sd
Replies: 1
Views: 743

Re: 762 -sd

Yep. Shipping to distributors this week.
by cpatterson86
Tue Dec 17, 2013 1:49 pm
Forum: AAC
Topic: Threading Guide Updates ?
Replies: 7
Views: 1372

Re: Threading Guide Updates ?

Latest revision is March 2013: http://www.advanced-armament.com/Manuals_ep_45-1.html Is page 12 the thread guide to use for a 300-TM? NOTES: 1) THIS THREAD GUIDE DETAILS A SPECIAL 5/8-24 THREAD FOR 7.62mm BARRELS. THE THREAD IS DESIGNED TO PROVIDE A BETTER FIT WITH THE 5/8-24-UNEF-3B THREADS IN AAC...
by cpatterson86
Wed Dec 11, 2013 12:04 pm
Forum: Rifle Discussion
Topic: FNC Muzzle Thread...
Replies: 1
Views: 615

Re: FNC Muzzle Thread...

Kramer wrote:I have a FNC waiting in ATF Purgatory and I would like to see if anybody knows the thread specs for the muzzle brake. I think that it might be 9/16-24 LH, but does anybody know for sure.

Thanks!
9/16-24LH for factory guns.
by cpatterson86
Tue Nov 26, 2013 3:37 pm
Forum: AAC
Topic: 300-TM Release?
Replies: 36
Views: 8263

Re: 300-TM Release?

The first 300-TMs are pending Form 3 approval. With current wait times, they will begin shipping early 2014.
by cpatterson86
Tue Nov 05, 2013 10:23 am
Forum: AAC
Topic: Ti-Rant ?
Replies: 2
Views: 1008

Re: Ti-Rant ?

Depends on what your dealer orders.

Ti-RANT 9 is available in 1/2x28 or M13.5x1LH.

Ti-RANT 45 is available in .578x28, .578x28 SHORT, or M16x1LH.
by cpatterson86
Tue Nov 05, 2013 10:21 am
Forum: Silencer Talk
Topic: New Suppressor Owner Impressions - SureFire Rifle & AAC Pist
Replies: 14
Views: 2109

Re: New Suppressor Owner Impressions - SureFire Rifle & AAC

There are three places where things start to unscrew themselves at the back of the suppressor and I just rudely found out yesterday after having problems after putting the piston back. It appears that the tube inside the piston collar also unscrews from the inside and also the tube before the first...
by cpatterson86
Mon Oct 07, 2013 9:40 pm
Forum: Silencersmithing Forum
Topic: M13.5x1 LH Threads on .40 Cal Barrel (0.032" Wall)?
Replies: 5
Views: 1123

Re: Sig P239 in .40

9mm bullets are 0.355", not 0.380"
by cpatterson86
Thu Oct 03, 2013 11:05 am
Forum: AAC
Topic: Element Rear Endcap Upgrade
Replies: 28
Views: 6358

Re: Element Rear Endcap Upgrade

Signature wrote:Is the upgrade still available? I'm getting to the party a little late.
Sure is.
by cpatterson86
Wed Oct 02, 2013 1:15 pm
Forum: AAC
Topic: AAC MG-SD
Replies: 3
Views: 1297

Re: AAC MG-SD

Is the AAC MG-SD silencer actually available for civilian purchase? I'm looking forward to having some fun after I get out of Cali. Yes, any of our dealers can order it, however the only two available FHs are threaded 9/16-24LH and .7812-24 Are they on the shelves if I actually ordered one? Thanks ...
by cpatterson86
Wed Sep 25, 2013 3:43 pm
Forum: AAC
Topic: AAC MG-SD
Replies: 3
Views: 1297

Re: AAC MG-SD

nl12 wrote:Is the AAC MG-SD silencer actually available for civilian purchase? I'm looking forward to having some fun after I get out of Cali.
Yes, any of our dealers can order it, however the only two available FHs are threaded 9/16-24LH and .7812-24
by cpatterson86
Tue Sep 17, 2013 11:19 am
Forum: Silencer Talk
Topic: AAC Mini 4 or M4-2000?
Replies: 9
Views: 2796

Re: AAC Mini 4 or M4-2000?

Since you already have the 762-SD, my vote is for the Mini4.
by cpatterson86
Mon Sep 16, 2013 1:10 pm
Forum: AAC
Topic: Finially got a Rem 700 AAC-SD SPS... where to get a mount?
Replies: 6
Views: 1713

Re: Finially got a Rem 700 AAC-SD SPS... where to get a moun

The newer muzzle brake with wrench flats (P/N 102320) will work with barrels greater than .750", but the flash hider (P/N 100209) and the Brakeout (P/N 101720) will not.
by cpatterson86
Wed Sep 11, 2013 10:55 am
Forum: AAC
Topic: 762SDN6 on 308 SBR?
Replies: 2
Views: 903

Re: 762SDN6 on 308 SBR?

DirtyHandsRob wrote:i looked around but couldn't find a straight answer on this so here it goes...

i bought a 762SDN6 yesterday and i was thinking about getting a Form1 308AR sent in. is this can GTG with 308 SBRs?
12.5" barrels or longer.
by cpatterson86
Mon Sep 09, 2013 12:28 pm
Forum: AAC
Topic: How much clearance past the rail is needed for 51T brake?
Replies: 20
Views: 14462

Re: How much clearance past the rail is needed for 51T brake

I know this first hand that with the DDMK18 if you use a AAC 51T flash hider and a AAC M4-2000 it will work 100% theres about enough room to slide a piece of notebook paper through with the suppressor all the way bottomed out on the mount. If you would like i can send pictures of it. Could you plea...
by cpatterson86
Thu Jul 25, 2013 2:32 pm
Forum: AAC
Topic: 17wsm through an Element. What say you AAC?
Replies: 15
Views: 3313

Re: 17wsm through an Element. What say you AAC?

I think the subject pretty well covers it. I have been considering a 5.56 can for quite some time but I was curious to see if this was workable or not. Thanks We have not tested this round, but it should be OK, especially in the 20+" barrels. This is based on the fact that they will withstand use o...
by cpatterson86
Tue Jun 18, 2013 9:02 pm
Forum: AAC
Topic: Cade . Tirant 45s takedown
Replies: 2
Views: 756

Re: Cade . Tirant 45s takedown

I thought all the short 45 s models were able to be taken down . This one does not budge. Serial number tr45k0005xx Yes, they should all be take apart. Did it come with the tool? If so, have you tried putting the tool in a vice? If you still can't get it, shoot me an email and I'll get you an RMA.
by cpatterson86
Tue Jun 18, 2013 3:08 pm
Forum: AAC
Topic: AAC 260 barrel question
Replies: 6
Views: 1435

Re: AAC 260 barrel question

I'm thinking about building a "budget shorty" 260 on a 700 action, and have had the opportunity to handle an uninstalled AAC 260 barrel and see its unique contour first hand. IIRC, at the threaded muzzle it is 0.750" in diameter. Could somebody throw a set of calipers on their barrel and tell me th...
by cpatterson86
Fri Jun 14, 2013 2:52 pm
Forum: AAC
Topic: Element Rear Endcap Upgrade
Replies: 28
Views: 6358

Re: Element Rear Endcap Upgrade

Bobo wrote:About how long is your can gone?

Bobo
Right now, average of about 5 business days once we receive the silencer before it is shipped back to you.
by cpatterson86
Wed Jun 05, 2013 10:22 pm
Forum: AAC
Topic: Ranger 3
Replies: 121
Views: 26759

Re: Ranger 3

aries14482 wrote:It's that time again!

Hey. AAC. What's the status on the Ranger 3?
Getting closer to production, but still no solid date. Sorry.
by cpatterson86
Wed Jun 05, 2013 10:20 pm
Forum: AAC
Topic: 3lug for the TiRants?
Replies: 5
Views: 1071

Re: 3lug for the TiRants?

Sorry guys, we still do not have a solid release date for the 3-lug, but we are working on one.
by cpatterson86
Wed May 29, 2013 12:18 pm
Forum: AAC
Topic: Glock not cycling with EVO 40
Replies: 6
Views: 1000

Re: Glock not cycling with EVO 40

OK, I feel a little stupid here because I am having problems. I have had an EVO 40 for a few years now and it has run flawlessly on multiple host guns. I recently picked up a new Lone Wolf threaded barrel for my Glock 23. I have not been able to get it to cycle more than 1-2 shots in a row. Yes it ...