Sorry double post..

Ben

I'm about to lose access to the CNC mill I had planned on previously using to engrave my serial number in my Form 1 can. So I got into looking at etching the serial number into the tube. However, the tube is Titanium and I am finding very very little on how to etch Ti. So since my endcaps are made ...

So I finally got around to testing it today. I had a barrel setup in the lathe that had just been threaded. I screwed my can onto the muzzle and checked it with an indicator. It is about .015" out. So I figure that is my problem... Anything I can do, besides re-make the tube?

Ben

I'm about to lose access to the CNC mill I had planned on previously using to engrave my serial number in my Form 1 can. So I got into looking at etching the serial number into the tube. However, the tube is Titanium and I am finding very very little on how to etch Ti. So since my endcaps are made f...

My barrel is a medium contour and hand guard is an Odin Works Kmod free float. I'm gonna try some of the suggestions mentioned tomorrow. Sadly I don't have a laser bore sight. I like that idea!

Ben

I'll do some of these tests to see how concentric my bore is to the tube. I have looked down the barrel with the suppressor attached and it all looked straight. But I'll do more conclusive tests! I am using Fiocchi 50gr Vmax same I shot the sub MOA group with. And yes all this testing is being done ...

So I've done some research and I'm not coming up with much. What makes a suppressor accurate? Obviously concentric building over the entire thing, but what else? Can anything else be done to help with accuracy? Put my Form 1 on my AR and shot a group over 1moa. I haven't shot the AR enough to know t...

Do want to see pics of the baffles!

Ben

So what is the most effective way to "clip" cone baffles? I saw a picture of an AAC M4-2000 baffle where it looked like the took an endmill over about half of the beginning of the cone. Or would it be better to use a 1/4" ball mill and cut through just on one side around 1/4" dee...

The baffles at the start of this thread, what is the easiest method to get concentric center holes in the freeze plugs? Sorry if it's a ridiculous question just curious!

Ben

Thanks for the replies. I'll stop my rant or now.

Ben

To start off modular is just a statement as you cant have extra parts for a suppressor however they can be modular in the respect that they can be easily adaptable to different platforms and attachments. The way the companies get away with this is they get the part (I.E. front cap/rear cap) approve...

So I'm not sure if this is the right place to post this or not, but I just saw another one. People throwing around the term "modular" on suppressors that are already on the shelves? Am I the only one missing something? The suppressors I am referring to are the SilencerCo Salvo 12 and the O...

I appreciate the very informative reply! I will give the .458 SOCOM a look. Thank you!

Ben

I'd like your thoughts on the .338 Spectre just as a general suppressed round as well as a hunting round for inside 150yds on deer, hogs and coyotes? It would most likely be on the ar platform. Are there better options? If so what are they. I would still like it to be subsonic as well and have a lit...

About as simple as it gets. 1.625" OD and 6.5" long direct attach. This should be a decent performer. http://img.photobucket.com/albums/v630/McLarenross/223Mini1_zpsb7783dee.png I like the looks of this! Would it preform better with clipped cones? Or would that just kill any accuracy that...

Ok well I will most likely just leave it at this size and drop the muzzle brake attachment. I really want this thing before hunting season starts up so I will work on my internal design to get the most efficient can I can have. I was originally going to try an monocore but I think I will drop that i...

Ok well it looks like I will just drop the muzzle brake attachment. I didn't realize it would give me less suppression. That being dropped is 6.25" still too short with 1.5" tubing? I didn't realize that you could ammend the length. How big of an ordeal is that? Seems like anything with th...

So on my Form 1 me being an idiot put down 6.25" as my length. I was planning on using 1.5" diameter tubing for the can. I was wondering if it was so short it would be more useless at this diameter? Should I step up to 1.75-2"? diameter? I don't know if it makes any difference or not ...

Looks awesome! Would love to know some specs as well.

Also how well does that muzzle brake attachment work? Thinking of doing something similar with my upcoming .223 can. Thanks

Ben

Thank you, I went through and found some designs that I liked. I am sure I will have plenty of questions in the future!

Ben

I apologize if this has been asked already, but I couldn't find much on it. I have a Form 1 one the way and 6.25" to play with(originally just a .22lr suppressor). I got to thinking that I'd like to suppress my AR15 and my .22-250 as well with this IF possible. If it is not I will just do anoth...

Thanks for all of the replies guys! This is how I will end up going I imagine! Just need the ATF to hurry up with that Form 1....

Ben

Glad to hear! I am planning on using K baffles and it will spend most of its time on my rifle and I like the looks of the larger cans like the .308s they just look correct! Planning on maybe doing a 1911 .22 pistol build so I may buy or make some taller sights to use it with! Just wanting as quiet a...

I am patiently(oh what the hell ever....) awaiting my Form 1 to return, I am thinking of designs while I wait. I discovered that I have some 1.25" aluminum tubing in my shop(I'll have to check the ID, but it's not very thick. On the Form 1 I put the length at 6.25" long. Is that going to b...