Search found 225 matches
- Tue May 10, 2016 7:46 pm
- Forum: Silencer Reviews
- Topic: Integrally suppressed airgun that sets off Binary?
- Replies: 4
- Views: 4773
Re: Integrally suppressed airgun that sets off Binary?
Any homeowners on that otherwise quiet cul-de-sac?
- Tue May 10, 2016 7:31 pm
- Forum: Silencer Reviews
- Topic: Bowers Vers 50 or Elite Iron 50/alpha
- Replies: 5
- Views: 5746
Re: Bowers Vers 50 or Elite Iron 50/alpha
I have this experience with the Bowers Vers 50; Used for 50 BMG. 647 grain bullets with Trail Boss and Red Dot both with loads that result in subsonic velocity, MagnetoSpeed chrono. The Bowers unit increases the velocity about 50 fps from non-suppressed velocity. Platform; 22 inch barrel, 1-15 twist...
- Tue May 10, 2016 7:19 pm
- Forum: Gear
- Topic: need Reflex, red dot experience
- Replies: 8
- Views: 11785
Re: need Reflex, red dot experience
I went with the Primary Arms, it is a good one, thanks.
- Wed Apr 06, 2016 6:17 pm
- Forum: NFA Weapons
- Topic: How much hassle is a SBR?
- Replies: 8
- Views: 4202
Re: How much hassle is a SBR?
Why does the NFA Tracker have Efile Form 4s showing submitted and stamped in the last year?
I thought no Efile for form 4.
Oh and there a lot of SBRs listed there, they are popular.
I thought no Efile for form 4.
Oh and there a lot of SBRs listed there, they are popular.
- Wed Mar 16, 2016 7:58 pm
- Forum: Handloading
- Topic: Stability
- Replies: 2
- Views: 3310
Re: Stability
Well, the JBM number is between 2 and 3 for my loads with Red Dot and Trail Boss (647 gr projectile), I am getting some key holes at 50 plus yards. A thin sheet of paper was the target.
I should have known that 647 gr 50 BMG is too large for stable subsonic use.
I should have known that 647 gr 50 BMG is too large for stable subsonic use.
- Sun Mar 13, 2016 4:02 pm
- Forum: Handloading
- Topic: subsonic 50 bmg
- Replies: 3
- Views: 4174
- Sun Mar 13, 2016 4:01 pm
- Forum: Handloading
- Topic: Stability
- Replies: 2
- Views: 3310
Stability
JBM has online calculator. Does anyone know if the higher the number is better or is 2-3 the optimal range?
Thanks,
Thanks,
- Sun Mar 13, 2016 3:57 pm
- Forum: Handloading
- Topic: .50 BMG Subsonic bolt guns?
- Replies: 10
- Views: 13866
Re: .50 BMG Subsonic bolt guns?
22 inch barrel, bolt, 1- 15 twist, CCI-35 primers 647 gr Barnes TAC-X, #30695. OAL - 5.205. Trail Boss 44 Grains, 22 round sample V average 1024 V max 1045 V min 1005 Red Dot 38 Grains, 10 round sample V average 1030 V max 1055 V min 1015 At 100 yards I am getting key holes, but JBM stability indica...
- Mon Mar 07, 2016 3:19 pm
- Forum: Silencer Talk
- Topic: nc silencer
- Replies: 7
- Views: 6516
Re: nc silencer
March 8 is Tuesday in 2016.
- Mon Mar 07, 2016 3:15 pm
- Forum: Rifle Discussion
- Topic: Safety Harbor 50 BMG SHTF
- Replies: 5
- Views: 8793
Re: Safety Harbor 50 BMG SHTF
Well, I got one, it has not blown up. Used commercial and hand loaded ammo. I like it.
- Mon Mar 07, 2016 3:13 pm
- Forum: Handloading
- Topic: Trail Boss powder
- Replies: 14
- Views: 18693
Re: Trail Boss powder
How much space left in the case with 9.3 gr?
- Wed Jan 27, 2016 2:59 pm
- Forum: Handloading
- Topic: Subsonic 115 GR 9mm
- Replies: 4
- Views: 5146
Re: Subsonic 115 GR 9mm
How do you use the Magnetospeed on the Sig 226?
Thanks,
Thanks,
- Sun Nov 22, 2015 9:39 pm
- Forum: Handloading
- Topic: Subsonic 115 GR 9mm
- Replies: 4
- Views: 5146
Re: Subsonic 115 GR 9mm
This powder No 7, the Vihta powders have less blow back.
- Mon Nov 16, 2015 7:50 pm
- Forum: Silencer Reviews
- Topic: Bowers Vers 50 or Elite Iron 50/alpha
- Replies: 5
- Views: 5746
Re: Bowers Vers 50 or Elite Iron 50/alpha
Yes, both classes, info is appreciated.
- Sun Nov 15, 2015 6:07 pm
- Forum: Ammo
- Topic: Emcon 220 HPBT
- Replies: 0
- Views: 3536
Emcon 220 HPBT
These are $1.75 per in my area. The box says Suppressor Specific, 300 Blackout. 16 inch bolt chrono results; Ave = 1111 Max = 1149 Min = 1052 9 round test. 12 inch semi auto chrono results Ave = 1095 Max = 1114 Min = 1079 10 round test, cycles, lock open on last round. Magnetospeed Chronograph. I th...
- Sun Nov 15, 2015 8:52 am
- Forum: Silencer Talk
- Topic: Help a newbie, please ?
- Replies: 5
- Views: 1128
Re: Help a newbie, please ?
In the past, plans and specs were not required. Maybe your form 1 was missing the length or caliber information, just a guess. You probably will need to call them.
- Mon Nov 02, 2015 9:08 pm
- Forum: Handloading
- Topic: subsonic 50 bmg
- Replies: 3
- Views: 4174
Re: subsonic 50 bmg
On gunbroker there is some Trail Boss in Abbevile, GA, and,
On 28 Oct: Franklin Gun Shop - Tennessee had one 5 lb jug for $149.99.
On 28 Oct: Franklin Gun Shop - Tennessee had one 5 lb jug for $149.99.
- Sun Nov 01, 2015 6:49 pm
- Forum: Classified Ads
- Topic: For Sale: SilencerCo Octane 45 HD Trade?
- Replies: 2
- Views: 1507
- Sun Nov 01, 2015 6:37 pm
- Forum: Handloading
- Topic: subsonic 50 bmg
- Replies: 3
- Views: 4174
subsonic 50 bmg
I am thinking of loading subsonic 50 bmg. I have heard of a load using Reddot with 690 gr bullets. I wonder if Trail Boss is a possiblity? Any thoughts will be appreciated. Thanks.
- Tue Oct 27, 2015 6:16 pm
- Forum: Silencersmithing Forum
- Topic: I do not know everthing
- Replies: 1
- Views: 680
I do not know everthing
Is 1 inch by 14 thread pitch, 1x14, the same as 1x14LH? I see this on some large bore offerings. Are there both right had and left hand in this size?
Thanks
Thanks
- Tue Oct 27, 2015 6:11 pm
- Forum: Silencersmithing Forum
- Topic: Completely legit.
- Replies: 18
- Views: 4290
Re: Completely legit.
Crackdown on creep and growth of regulations...
- Mon Oct 26, 2015 1:32 pm
- Forum: Silencersmithing Forum
- Topic: New Bill Starting Up
- Replies: 1
- Views: 1078
- Mon Oct 26, 2015 1:12 pm
- Forum: Handloading
- Topic: Trail Boss powder
- Replies: 14
- Views: 18693
Re: Trail Boss powder
On gunbroker there is some in Abbevile, GA, and,
On 28 Oct: Franklin Gun Shop - Tennessee had one 5 lb jug for $149.99.
On 28 Oct: Franklin Gun Shop - Tennessee had one 5 lb jug for $149.99.
- Sun Oct 25, 2015 10:27 pm
- Forum: Silencer Reviews
- Topic: Vendor Info
- Replies: 0
- Views: 2137
Vendor Info
I came across Gateway Tactical, seems to have good prices on cans, does anyone have info about them?
Thanks.
Thanks.
- Sun Oct 25, 2015 10:25 pm
- Forum: Silencer Reviews
- Topic: Bowers Vers 50 or Elite Iron 50/alpha
- Replies: 5
- Views: 5746
Bowers Vers 50 or Elite Iron 50/alpha
Any info, reviews?
Thanks,
Thanks,