Search found 1222 matches

by jreinke
Wed Jan 30, 2019 8:18 am
Forum: Rifle Discussion
Topic: PTR 91 supressed questions
Replies: 5
Views: 2730

Re: PTR 91 supressed questions

Found this:

viewtopic.php?t=45692

Scroll down till you see the post from Artful.
by jreinke
Tue Jan 29, 2019 8:31 am
Forum: Rifle Discussion
Topic: PTR 91 supressed questions
Replies: 5
Views: 2730

Re: PTR 91 supressed questions

I read somewhere (a long time ago, 20+ years) that to fire a HK91/93 type rifle suppressed you have to replace the rollers in the bolt head with smaller diameter rollers. This allows it to slip easier under the higher back pressure caused by having a can on. Now where you would find the information ...
by jreinke
Thu Jan 03, 2019 7:41 am
Forum: Handgun Talk
Topic: Remington R51
Replies: 14
Views: 5829

Re: Remington R51

Well here it is over 4 years later and Remington still hasn't made a threaded barrel for the R51. I was about to make my own barrel with I discovered the R51 chat room and there was a guy that made some threaded R51 barrels. Here's the link to the company: https://www.dangerco.us/ They are $125. Bou...
by jreinke
Wed Oct 10, 2018 8:17 am
Forum: Silencersmithing Forum
Topic: Sub $1k lathe including shipping 8x16 with 5” chuck 1.5” pass thru
Replies: 82
Views: 18790

Re: Sub $1k lathe including shipping 8x16 with 5” chuck 1.5” pass thru

The spindle bore is 38mm which is NOT 1.5". I'll bet you money it will not accept a 1.5" OD tube.
by jreinke
Thu Sep 13, 2018 10:54 am
Forum: Silencersmithing Forum
Topic: Spiral Baffle Design....yay or nay?
Replies: 23
Views: 3151

Re: Spiral Baffle Design....yay or nay?

Unfortunately, when Paladin Press went belly up, so did the availability of both of Al Paulson's two books as well as the silencer patent book by N.R. Parker.
by jreinke
Thu Sep 06, 2018 9:15 am
Forum: NFA Weapons
Topic: No DD dealer in this part of the state
Replies: 6
Views: 3787

Re: No DD dealer in this part of the state

You don't need a Type 10 FFL, a M203 receiver with no barrel is classified as a Title 1 firearm. It's not a DD until after you Form 1 it and add the 40mm barrel. I just went through this when I purchased a M203 receiver from a contract overrun at DS Arms.
by jreinke
Fri Jul 27, 2018 8:58 am
Forum: News Stories
Topic: Police response times...fudging the records
Replies: 4
Views: 986

Re: Police response times...fudging the records

I firmly believe that a crooked cop is one notch above or below (your choice) a child molester. That may sound harsh to some, but law enforcement personal hold a "sacred trust" with the people they serve. Break that trust and pay the consequences.
by jreinke
Mon Apr 16, 2018 9:18 am
Forum: Gun Discussion
Topic: Easy Toilet Repair Tips That You Can Do Yourself
Replies: 5
Views: 3014

Re: Semi-Auto minigun???

As soon as I win the Powerball or Mega Millions I'm going to have either Dillon or DeGroat make me one!!!! Tripod mounted, belt fed, hand cranked madness. :mrgreen:
by jreinke
Fri Jan 26, 2018 10:38 am
Forum: Silencer Talk
Topic: Muzzle pressure comparisons in different 38 calibers
Replies: 7
Views: 2657

Re: Muzzle pressure comparisons in different 38 calibers

Can you use quick load to calculate muzzle pressure for m855a1 from a 20 and 10.5 barrel, 9mm +p+ 115 grain 5.2 barrel, 308 185 grain Berger at 2750 FPS from a 24 barrel, 30-06 berger at 2950 FPS from a 26 barrel, and the hottest possible 300 rum load from a 26 barrel? Thanks in advance. The short ...
by jreinke
Tue Dec 26, 2017 11:24 am
Forum: Silencer Talk
Topic: Caliber choice for TC Encore Pistol
Replies: 10
Views: 2580

Re: Caliber choice for TC Encore Pistol

What ever caliber you choose, I would highly recommend that you spend the $200 and make your frame a SBR. I did that to one of my G2 Contenders and intend to do so with my newly purchased Encore frame. That way you can slap a stock on it with any barrel length. A 10” 300 Blk barrel and a side foldin...
by jreinke
Sat Nov 11, 2017 8:31 am
Forum: News Stories
Topic: We haven't heard from him in a while...
Replies: 15
Views: 2298

Re: We haven't heard from him in a while...

I can remember when his first film came out in 2006, someone published his electricity usage over one year along with pictures of the Gore mansion in Nashville with air conditioning units in EVERY window. Fucking hypocrite!
by jreinke
Thu Nov 02, 2017 10:48 am
Forum: Legal and Political
Topic: is it possible to get a home based 07/02? if so do you have to pay ITAR even if you dont ever manufacture anything?
Replies: 9
Views: 1206

Re: is it possible to get a home based 07/02? if so do you have to pay ITAR even if you dont ever manufacture anything?

One of the requirements of getting a FFL is that you comply with all zoning requirements. That means your property will have to be rezoned for multiple use as opposed to residential. Depending on you jurisdiction, this my impose an increase in property taxes. Just something to think about.
by jreinke
Wed Nov 01, 2017 8:31 am
Forum: Shotguns
Topic: Someone @ Remington Smoking Crack....Again
Replies: 1
Views: 7431

Someone @ Remington Smoking Crack....Again

Stupid A-holes came out with a nickel-plated version of the Tac-14, for $400 more than the blued version. Bite me!
by jreinke
Sat Oct 21, 2017 9:02 am
Forum: Silencer Talk
Topic: R51: potential as a silencer host?
Replies: 8
Views: 2003

Re: R51: potential as a silencer host?

Yes, they had a recall. You sent in your old R51 and they sent you back a new one, in a hard case with 2 extra mags. Fit and finish of the new ones was night and day better. I never really had any functioning problems with the old one.
by jreinke
Fri Oct 20, 2017 9:10 am
Forum: Silencer Talk
Topic: R51: potential as a silencer host?
Replies: 8
Views: 2003

Re: R51: potential as a silencer host?

This is the reason I bought the R51 in the first place. As a matter of fact I actually bought the can first, a Thompson Machine BDSD on close out for $202. The problem is Remington has yet to make the threaded barrel they promised, go figure. I've decided that if they haven't brought one out by next...
by jreinke
Sat Oct 14, 2017 9:17 am
Forum: Legal and Political
Topic: Speaker Ryan's Opponent Paul Nehlen Shows Suppressor Truth In Ad
Replies: 5
Views: 1000

Re: Speaker Ryan's Opponent Paul Nehlen Shows Suppressor Truth In Ad

I will be voting for him next August in the runoff election! F*ck Ryan!
by jreinke
Mon Oct 09, 2017 7:59 am
Forum: News Stories
Topic: Paladin Press closing, big inventory elimination sale to Nov 29
Replies: 1
Views: 805

Re: Paladin Press closing, big inventory elimination sale to Nov 29

If anyone doesn't have Al Paulson's or N.R. Parker's silencer books, now would be the time to grab them.
by jreinke
Sun Oct 08, 2017 5:51 am
Forum: News Stories
Topic: 12 Bump stocks used by Vegas shooter
Replies: 13
Views: 1583

Re: 12 Bump stocks used by Vegas shooter

I've got a table at a local gun show this weekend. Yesterday some arrogant asshat was hawking a new in the box bumpfire stock, he wanted $1000 for it. I laughed so hard I almost pissed myself.
by jreinke
Tue Jul 25, 2017 12:12 pm
Forum: Legal and Political
Topic: The Untold Story: All that Trump/Pence have done
Replies: 2
Views: 767

Re: The Untold Story: All that Trump/Pence have done

I'm still waiting of the man to eliminate the need for gunsmiths to pay ITAR! :x
by jreinke
Sun Jul 23, 2017 10:13 am
Forum: Silencersmithing Forum
Topic: thread pitch
Replies: 12
Views: 2113

Re: thread pitch

I'd go with 28 tpi. So, assuming you have a lathe, and can cut internal and external threads, this is the route I would take. Using the formula TD (tap drill or tube ID) = MD (major diameter or thread size) - P (pitch of thread or 1/28), I'd fill in the information that you have. TD (.870) = MD (?) ...
by jreinke
Wed Jul 05, 2017 8:16 am
Forum: Silencer Talk
Topic: Is there an industry convention for threads?
Replies: 8
Views: 1074

Re: Is there an industry convention for threads?

I want to thread a barrel for a muzzle device, and while looking for the die , I see several types of threads: - UNEF - UNF - UNC - UNS - NPT I'd think UNEF would be preferable to allow a tighter seal. mbogo BTW all of these thread specs assume that you cut the threads on a lathe. Cutting barrel th...
by jreinke
Tue Jul 04, 2017 9:24 am
Forum: Silencer Talk
Topic: Is there an industry convention for threads?
Replies: 8
Views: 1074

Re: Is there an industry convention for threads?

Here's the link to Silencerco's specs: https://silencerco.com/product-support/#tab-4

Some where I've got Sig specs too, I'll see if I can find them.

ETA - Sig: http://www.ar15.com/forums/t_6_20/47879 ... rakes.html
by jreinke
Sat May 06, 2017 5:16 am
Forum: Silencersmithing Forum
Topic: The Father of All Lathes
Replies: 6
Views: 1903

Re: The Father of All Lathes

I saw a picture once of the lathes at Waterveliet Arsenal in New York, where they turned the barrels for the WWII 16" battleship guns. The operator rides in a "box" on top of the cutter bit!
by jreinke
Wed Apr 26, 2017 9:00 am
Forum: Rifle Discussion
Topic: Ruger and Savage
Replies: 5
Views: 955

Re: Ruger and Savage

I'm new here and have a couple questions. #1 using a Napa 4003 and doormans w/ 2 chambers, is there a way to make a Savage Stealth 6.5 any more quieter. Right now she sounds a lil more than a 22lr. #2 With a Ruger American 204 using a 7" aftermarket D tube with 6 aluminum cups, can anyone suggest h...