I ordered a piece and its clean, straight, polished inside and out. Should make a nice tube .
Search amazon for it various sellers.
DERNORD 1.5 Inch SS304 Sanitary Spool Tube with Clamp Ends,Seamless Round Tube with 1.5" Tri Clamp 50.5mm Ferrule Flange(Tube Length:12 Inch/304mm) under $20
Search found 126 matches
- Wed Nov 09, 2022 4:29 pm
- Forum: Silencersmithing Forum
- Topic: Inexpensive 1.5" 304 stainless polished tube
- Replies: 2
- Views: 1637
- Thu Mar 03, 2022 9:30 pm
- Forum: Silencersmithing Forum
- Topic: Eform 1 denial
- Replies: 6
- Views: 2409
Re: Eform 1 denial
New design questions are required to be answered before you get form 1 approval. Buy nothing until you have an approved form 1 in hand would be my suggestion. Any parts purchased before you have the approved form 1 in hand will probably get you denied. Just an FYI This is being put to the test so wi...
- Wed Jan 13, 2021 3:47 am
- Forum: Silencersmithing Forum
- Topic: TouchDRO for lathe
- Replies: 0
- Views: 1731
TouchDRO for lathe
Yuriy just got the new v2 glass scale dro boards in. $89 free shipping . At yuriyβs toys . www.touchdro.com/store/diy-dro-glass-scale-adapter-v2.html Glass scales on eBay ~$40-60 each. When I get mine in I will print up some magnetic mounts for quick attachment to lathe. I am using the Shahe board h...
- Wed Dec 23, 2020 2:58 am
- Forum: Silencersmithing Forum
- Topic: Sub $1k lathe including shipping 8x16 with 5β chuck 1.5β pass thru
- Replies: 90
- Views: 47733
Re: Sub $1k lathe including shipping 8x16 with 5β chuck 1.5β pass thru
Hello to everyone. Iβm a fng and came across this while looking for solutions to a problem with my new mini lathe. I have the wm210v-g 8.7x31β with the 38mm spindle bore. Like the other guys said, it came covered in grease and grime. I tried to half ass the cleaning because I was intimidated by tho...
- Wed Dec 23, 2020 2:10 am
- Forum: Silencersmithing Forum
- Topic: Sub $1k lathe including shipping 8x16 with 5β chuck 1.5β pass thru
- Replies: 90
- Views: 47733
Re: Sub $1k lathe including shipping 8x16 with 5β chuck 1.5β pass thru
www.myvirtualnetwork.com/mklotz/files/changejs.zip Download this program, extract it, and add lathe, and set it up like I have posted pic's pages back in this thread. This will calculate gears. For 24TPI 28TPI and 1mm. I use some printed combo gears so no need to calculate. 24 tpi the middle gear co...
- Sat Jun 06, 2020 3:13 am
- Forum: Silencersmithing Forum
- Topic: Sub $1k lathe including shipping 8x16 with 5β chuck 1.5β pass thru
- Replies: 90
- Views: 47733
Re: Sub $1k lathe including shipping 8x16 with 5β chuck 1.5β pass thru
I just checked the forum and responded to your pm. I found another gear ratio program and simplified the chart. Only gears needed are a 34 tooth and a 56 tooth. No charge for the gears, just pay shipping. You will need to clean up bore and keyway on the nylon gears. 56 spindle gear on the headstock ...
- Mon Jun 01, 2020 5:12 am
- Forum: Silencersmithing Forum
- Topic: Sub $1k lathe including shipping 8x16 with 5β chuck 1.5β pass thru
- Replies: 90
- Views: 47733
Re: Sub $1k lathe including shipping 8x16 with 5β chuck 1.5β pass thru
Updated the gear threading chart with printed gears needed to get 0% error. First chart I posted needed a longer banjo to work. This one works with the one that comes with the lathe. Without a threading dial cutting imperial threads on this lathe is best not to disengage nut. Back out of cut and rev...
- Sun May 31, 2020 1:19 pm
- Forum: Silencersmithing Forum
- Topic: 45 Cal Suppressor Design Review
- Replies: 120
- Views: 53596
Re: 45 Cal Suppressor Design Review
Nice work!
Reversing blast baffle fin rotation would cause suppressor to not have a tendency to loosen, like the oss design causes a rotation to tighten the suppressor.
Not sure if it matters, just something I noticed.
Canβt wait to see a video of how it performs.
Reversing blast baffle fin rotation would cause suppressor to not have a tendency to loosen, like the oss design causes a rotation to tighten the suppressor.
Not sure if it matters, just something I noticed.
Canβt wait to see a video of how it performs.
- Thu May 28, 2020 5:21 pm
- Forum: Silencersmithing Forum
- Topic: Clipping a 5.56 Suppressor worth the accuracy and POI issues?
- Replies: 20
- Views: 14900
Re: Clipping a 5.56 Suppressor worth the accuracy and POI issues?
I run it semi auto so no problem with loading next cartridge , shooting subsonic loads wonβt cycle but are pellet gun quiet. But the >2lbs does suck.
Working on a light weight form1 at the moment and will definitely clip the cones.
Working on a light weight form1 at the moment and will definitely clip the cones.
- Wed May 27, 2020 7:04 pm
- Forum: Silencersmithing Forum
- Topic: Clipping a 5.56 Suppressor worth the accuracy and POI issues?
- Replies: 20
- Views: 14900
Re: Clipping a 5.56 Suppressor worth the accuracy and POI issues?
Now what's noticeable is the noise from the port where the spent case is ejected. It's still really loud and not hearing safe. You can get an AR carbine with the Stoner gas system ("DI"-not actually, but how most refer to it) below 140 dB with an adjustable gas block. Not by much, mind yo...
- Wed Sep 25, 2019 4:01 pm
- Forum: Silencersmithing Forum
- Topic: Sub $1k lathe including shipping 8x16 with 5β chuck 1.5β pass thru
- Replies: 90
- Views: 47733
Re: Sub $1k lathe including shipping 8x16 with 5β chuck 1.5β pass thru
Same here, stepped up from a 7x10 mini lathe. So no experience with other lathes.
I wanted the larger diameter pass thru didnβt need a longer lathe as suppressors and flashlights are what I plan to use it for.
I wanted the larger diameter pass thru didnβt need a longer lathe as suppressors and flashlights are what I plan to use it for.
- Mon Mar 11, 2019 8:49 am
- Forum: Silencersmithing Forum
- Topic: Will Gov Shutdown hold up Form 1 applications?
- Replies: 17
- Views: 5098
Re: Will Gov Shutdown hold up Form 1 applications?
If using iPhone attachment didnβt show up for me.
Using windows computer checking emails the attachment was seen.
The email they send is usually right after you submit the form payment.
Both of mine were like this. Just a FYI
Using windows computer checking emails the attachment was seen.
The email they send is usually right after you submit the form payment.
Both of mine were like this. Just a FYI
- Tue Feb 19, 2019 2:26 pm
- Forum: Silencersmithing Forum
- Topic: Sub $1k lathe including shipping 8x16 with 5β chuck 1.5β pass thru
- Replies: 90
- Views: 47733
Re: Sub $1k lathe including shipping 8x16 with 5β chuck 1.5β pass thru
No problem.
Any projects with lathe yet?
Any projects with lathe yet?
- Mon Feb 18, 2019 10:57 am
- Forum: Silencersmithing Forum
- Topic: Sub $1k lathe including shipping 8x16 with 5β chuck 1.5β pass thru
- Replies: 90
- Views: 47733
Re: Sub $1k lathe including shipping 8x16 with 5β chuck 1.5β pass thru
The Gear chart with added 3D printed gears updated June 1st 2020 these combos should fit. The program needed banjo length to constrain what gears are allowed to be combined. The old chart gears didnβt fit.
- Sat Jan 26, 2019 12:57 pm
- Forum: Silencersmithing Forum
- Topic: Will Gov Shutdown hold up Form 1 applications?
- Replies: 17
- Views: 5098
Re: Will Gov Shutdown hold up Form 1 applications?
In the email they send you. Attachment was not showing up if checking email on an iPhone, or at least not on mine. I checked email later on my home computer and had an attachment you could print out.
- Fri Jan 11, 2019 9:11 am
- Forum: Silencersmithing Forum
- Topic: Sub $1k lathe including shipping 8x16 with 5β chuck 1.5β pass thru
- Replies: 90
- Views: 47733
Re: Sub $1k lathe including shipping 8x16 with 5β chuck 1.5β pass thru
No, itβs open.
I put in a 4 jaw 6β.
I put in a 4 jaw 6β.
- Fri Dec 07, 2018 10:43 pm
- Forum: Silencersmithing Forum
- Topic: Grooving Baffles
- Replies: 5
- Views: 1826
Re: Grooving Baffles
Dewalt brand circular blades tips separated after very little use.
Using 7x lathe, not sure if operator was a bigger part of the problem.
But I am now using carbide insert parting tool and have not had any problems.
Using 7x lathe, not sure if operator was a bigger part of the problem.
But I am now using carbide insert parting tool and have not had any problems.
- Thu Dec 06, 2018 5:45 pm
- Forum: Silencersmithing Forum
- Topic: Sub $1k lathe including shipping 8x16 with 5β chuck 1.5β pass thru
- Replies: 90
- Views: 47733
Re: Sub $1k lathe including shipping 8x16 with 5β chuck 1.5β pass thru
Nice! Here is a program that can be setup for most lathes. The changejs.zip has a program called change wheels. You can add your model of lathe and the gears you have or a range you want to check. http://www.myvirtualnetwork.com/mklotz/ I added the mx-210v. The gear pic is reversed side to side. htt...
- Thu Dec 06, 2018 10:24 am
- Forum: Silencersmithing Forum
- Topic: Sub $1k lathe including shipping 8x16 with 5β chuck 1.5β pass thru
- Replies: 90
- Views: 47733
Re: Sub $1k lathe including shipping 8x16 with 5β chuck 1.5β pass thru
Perfect! That will reverse leadscrew by adding a gear if needed. Since the gear on the top shaft is just an idler gear the dual gear setup could be made to fit. The amount of teeth wonβt matter as itβs a tooth per tooth rotation 1:1. Only ratio of the first and last gear in a sequence matter. Even p...
- Tue Dec 04, 2018 5:19 am
- Forum: Silencersmithing Forum
- Topic: Sub $1k lathe including shipping 8x16 with 5β chuck 1.5β pass thru
- Replies: 90
- Views: 47733
Re: Sub $1k lathe including shipping 8x16 with 5β chuck 1.5β pass thru
The mini lathe has a gear in position A linked thru an idler gear to spindle. This lets you change A/B ratio easy, you can also reverse the lead screw rotation as well with a lever to engage a forward or reverse idler gear. The 8x16 doesnβt have this option, lead screw follows the spindle. May be po...
- Mon Dec 03, 2018 6:19 am
- Forum: Silencersmithing Forum
- Topic: Sub $1k lathe including shipping 8x16 with 5β chuck 1.5β pass thru
- Replies: 90
- Views: 47733
Re: Sub $1k lathe including shipping 8x16 with 5β chuck 1.5β pass thru
To use a calculator you need to have a 56 tooth starting gear. The ratio will be 56/c x d/e, a and f are not used but a small gear needs to fill the space. The b gear (idler) wonβt matter as the size you need will be dictated by the gap you need to fill between gear c and the 56 tooth spindle gear. ...
- Sun Dec 02, 2018 2:17 pm
- Forum: Silencersmithing Forum
- Topic: Sub $1k lathe including shipping 8x16 with 5β chuck 1.5β pass thru
- Replies: 90
- Views: 47733
Re: Sub $1k lathe including shipping 8x16 with 5β chuck 1.5β pass thru
No problem. Thatβs a 220v 50hz, not sure if itβs an issue as they have a dc motor . Man I am really enjoying my 8x16. You will have to do some mods but for such a small lathe it works great. Drilled holes to adjust compound without unscrewing it. Under 10 minutes turning. Currently working on a 22lr...
- Wed Nov 28, 2018 6:42 pm
- Forum: Silencersmithing Forum
- Topic: The NAPPA Fuel Filter Silencer.
- Replies: 21
- Views: 9421
Re: The NAPPA Fuel Filter Silencer.
I have read a lot of threads about "form 1" e.t.c. and they always seem to speak of "Sent in on April 1oth, got the letter in late October" sort of thing.. so I assumed thet this was the average wait for the "Tax stamp" to build or buy a silencer in the US... The rapid...
- Tue Nov 27, 2018 10:00 pm
- Forum: Silencersmithing Forum
- Topic: Newbie 'M' baffle question
- Replies: 27
- Views: 5983
Re: Newbie 'M' baffle question
Yes kβs by muzzle, followed by parabolic in the mix might be interesting.
I would need to work on a jig for turning the parabola.
Would also be handy for small radius cuts.
I would need to work on a jig for turning the parabola.
Would also be handy for small radius cuts.
- Tue Nov 27, 2018 8:03 pm
- Forum: Silencersmithing Forum
- Topic: Newbie 'M' baffle question
- Replies: 27
- Views: 5983
Re: Newbie 'M' baffle question
Not sure, but seems like the supersonic shock wave might have something to do with it. Shorter barrels do not benefit from this configuration. The reduction is significant, especially keeping the same volumes and materials. Would be interesting to see if adding some ablative material to the longer s...