Can it and should it are two different things. If you shot it through a Mask, it probably won't explode on the first shot and it probably won't be quiet. I've shot 308 through a Ghost, and it didn't explode nor was it quiet. It warped a few of the baffles a bit. (Don't do that at home, I'm not sayi...

Since the .20 Vartarg uses .223 Remington brass necked down for a .204 bullet, then it seems to me that any suppressor safe for .223 Rem would work for the .20 Vartarg (32gr bullet going 3600-3900 fps). You could ask Silencerco, but the .22 Hornet is 2900 to 3100 fps for a 35 gr bullet; while the ....

Can 20 VarTarg be shoot through these 22 suppressors? Host is a 24" CZ-527. I do have a SilCo Omega to use for the 20 VarTarg.

SilencerCo Sparrow SS rated for 22 Hornet and 5.7 x 28mm
Dead Air Mask HD rated for 5.7 x 28mm
Liberty Regulator 17 & 22 rimfire only

ATTN: Disclosure Division, Room 4E.301Via Electronic Mail and Facsimile 99 New York Avenue, NE Washington, DC 20226 Email: foiamail@atf.gov Fax: (202) 648-9619 RE: Freedom of Information Act Request To whom this may concern: Pursuant to the Freedom of Information Act (5 U.S.C. § 552), the Bureau of ...

It seems Len Savage has begun research towards bringing a new fight against the shenanigans being pulled by NFATCA, who is acting on behalf of the ATF. http://media.wix.com/ugd/c601ae_752f25349f49482aab9a7bde84ce9136.pdf It's about time these people are stopped because they don't represent the inter...

I used Capitol Armory to purchase an Omega 30 and a 45 Osprey through SilCo's SPEQ program. The SPEQ is ran like Glock's Blue Label program, meaning they can't sell any off the shelf suppressor at SPEQ program prices. SPEQ suppressors are assigned to the program and not all SilCo dealers are able to...

I have the following: Wells NOMAD SilCo Sparrow SS AAC Pilot II Dead Air Mask HD Liberty Regulator I shot all of them back to back last weekend, on 1911 22lr and 22/45 Lite 22lr. My favorite of the bunch is the Dead Air Mask, followed closely by Liberty Regulator and SilCo Sparrow. The Nomad is too ...

I visited my Operative B last week at Sienna Armory in Missouri City TX. The Op B CZ is a very light rifle, and the cz wood is very nice. I'll have a lot of fun with this rifle once the Form 4 is approved. Baffle unscrews from front of tube, is around 6" long, which means barrel is maybe 10&quo...

YugoRPK wrote:Conservatives make up what , about 20% on a good day of the electorate? Romney was about as conservative as the rest of us can stomach. Given the choice between Cruz and Hillary Clinton ...I'd just stay home.

That's the type of attitude which buts Hillary or Bernie in the White House.

Tonight is proving again people don't want a person who is controlled by the GOP to be President. I want Cruz to win, but as long as the GOP elites keep trying to force their people on us then Trump will continue to win over Cruz. Just imagine how well Cruz would have done if Rubio and Kasich were o...

BTW, Cruz is doing very well tonight on the debate, while Rubio is starting to make me sick. I'd rather have Trump than GOP controlled Rubio. After Rubio's great performance last debate, I hoped that Jerry Springer and Howard Stern would moderate a debate. It was hilarious. Where was THIS Rubio las...

BTW, Cruz is doing very well tonight on the debate, while Rubio is starting to make me sick. I'd rather have Trump than GOP controlled Rubio.

Trump help funded Mitch McConnell when he was primaried in 2014. I think McConnell is establishment. After NRO published several opinion pieces that were against trump the lashed out and NRO was kicked out of the next debate to make him happy, but the establishment hates him? Even trump him self sa...

I retired from the Air Force after 20 yrs of service to our Nation, and I followed Dave Ramsey financial peace program for years, in other words 'no trailer trash here'. I voted for Cruz in my home state of Texas because I want someone who is a constitutionalist and who is not a normal 'insider' wit...

I picked up my MASK HD from Capitol Armory a couple of weeks ago. It has quickly become my favorite 22 suppressor, being compared to the others I own: AAC Pilot II, SilCo Sparrow, and Wells Nomad. Liberty Regulator is in jail at Capitol Armory, but I still believe the MASK will be better than it too...

c5_nc, I have mailed my Form 1 for a 8" 30 cal build, and it will be an all Ti build with 1.625" OD tube, reflex design, short press fit spacer on first baffle, hollowed out end cap, and VSR's. Questions: 1. What length should the spacers be for use with VSR's? 2. Do you recommend the DM ...

c5_nc, I have mailed my Form 1 for a 8" 30 cal build, and it will be an all Ti build with 1.625" OD tube, reflex design, short press fit spacer on first baffle, hollowed out end cap, and VSR's. Questions: 1. What length should the spacers be for use with VSR's? 2. Do you recommend the DM G...

I've been shooting my 8" MPX with ACC EVO-9 attached, but have both SilCo Osprey 45 and TM SG-2 9 cans on order. It's been rumored the 4.5" factory Sig MPX barrels will be ready for release as a barrel swap kit in the next couple of months (don't hold your breath). I'm sticking with 13.5 b...

Placed an email order to DM for 2 can parts. Getting the 80% internals. Will be reflex mounted. The bad part is the 16-20 week wait. Roger You using the 80% throughout the entire build? Are you using direct thread or OTB break? I'm starting to consider using 60 degree 80% out of Stainless as the fi...

c5_nc wrote: Basically 3.12" will be behind the muzzle on the 2.5" reflex break.

Do you recommend the DM's "Reflex Adapter" or DM's "Griffin OTB break"?
How much gap between first baffle and muzzle/break? I was thinking 1/4" to 1/2", but not for sure.

I posted 2 of my DM reflex builds before and have a lot of videos on youtube. To answer you question I am sure that is good, I went with the 1.625" tubes and next will be 1.5" (So I can get a complete build under 10oz). You can get 80% internals to fit the tube from them, or a VSR that is...

I posted this a couple of years ago, but no takers, so it's time for me to do a Form 1 Reflex build. http://www.silencertalk.com/forum/viewtopic.php?f=2&t=132072 Are Ti VSR's 1.640 with hole between 0.340 to 0.360 available for the 1.75 OD / 1.642 ID tube? Is Ti spacer material available for the...

glockcrazz wrote:Omega from silencer shop
Trust
Order 9/24/15
Check cashed 10/14/15
Form 3 approved 12/2/15
Items shipped to local shop
Form 4 ??-??-??

So how much longer until the stamp?

5 months

I have the Operative C and LOVE it. Really want to compare it to an Operative B before buying one because the C is already so quiet I'm not sure it'll be worth another $1k and stamp if it's only 1 or 2 decibels. Really wish there were some numbers on both of them to see what the difference, because...

Who on here owns an Operative B CZ from Thompson Machine? What do you like about it the most? BTW, I'm about to go broke from recent purchases: Capital Armory: Silco Osprey .45 ordered Aug Dead Air Mask 22 ordered Aug Liberty Regulator 22 ordered Nov Turkey week And last week I ordered the following...