Search found 26 matches

by 35NCO
Sat Aug 11, 2018 8:50 am
Forum: Classified Ads
Topic: B&K 2209 sound measuring equipment.
Replies: 5
Views: 2230

Re: B&K 2209 sound measuring equipment.

PM sent.
by 35NCO
Mon Oct 30, 2017 7:21 pm
Forum: Handgun Talk
Topic: When is the Remington R1 enhanced coming out?Silencer ready
Replies: 15
Views: 5803

Re: When is the Remington R1 enhanced coming out?Silencer ready

Finish is fine. Disappointed with accuracy and consistency, even with updates. The engraving looks smudged on mine. Kinda rough. Its alright. Not 1k+ alright though. More like 650 or less imo. You can home build a much nicer one for recommended price.
by 35NCO
Sun Oct 29, 2017 11:25 am
Forum: Silencersmithing Forum
Topic: Budget 3D printed baffles?
Replies: 7
Views: 2665

Re: Budget 3D printed baffles?

I also would not jump right to SLA Care to elaborate on this point? I've never had any interest in FFT, I don't have to try that to see that it requires a lot of trial&error. They also have serious limitations when it comes to "overhang" and such. Without any experience SLA seems like a superior me...
by 35NCO
Sun Oct 29, 2017 8:19 am
Forum: Silencersmithing Forum
Topic: Budget 3D printed baffles?
Replies: 7
Views: 2665

Re: Budget 3D printed baffles?

There is a huge amount of affordable FFT 3d printers on eBay and Amazon. I also would not jump right to SLA. Look into CR10, Flashforge, CTC 3D, TEVO DELTA...ext. From my experience 3d printing is amazing in general. But, it is NOT plug and play. Most of them hardly print out of the box at all. Even...
by 35NCO
Fri Oct 20, 2017 8:23 pm
Forum: Silencersmithing Forum
Topic: 3D Printed SilencerCo Octane Endcap tools, DEMO VID
Replies: 12
Views: 3293

Re: 3D Printed SilencerCo Octane Endcap tools, DEMO VID

No offense but have you actually used these? We use similar but higher quality rapid prototype machines at work, and it's hard to imagine one of these tools surviving more than a couple uses, unless the caps are never tightened very much. The material is pretty weak. The chemistry of plastics has a...
by 35NCO
Sun May 21, 2017 8:53 pm
Forum: News Stories
Topic: What right do we have if GPS tracking device removed from your vehicle?
Replies: 9
Views: 953

Re: What right do we have if GPS tracking device removed from your vehicle?

Better call Saul had a good method on this. Get the same type, drain the battery in the one they placed, then swap with yours when they come to get it or change the battery. Either way you will learn who's watching. Interesting trade craft.
by 35NCO
Sun May 21, 2017 8:41 pm
Forum: Mid-Atlantic
Topic: Shooters Gauntlet Stone Mountain MG Shoot on 03 to 04 June in PA
Replies: 0
Views: 2292

Shooters Gauntlet Stone Mountain MG Shoot on 03 to 04 June in PA

Shooters Gauntlet, Stone Mountain MG Shoot on 03 to 04 June in PA. Its a fast growing knob creek MG style shoot.

Thought I would mention it for the Forum folks that may come. Always nice to meet other Suppressor/NFA people.


Safe travels!
by 35NCO
Tue May 02, 2017 8:22 pm
Forum: Mid South
Topic: Ok, who's in Virginia?
Replies: 116
Views: 47298

Re: Ok, who's in Virginia?

I am often. Have cans, will travel... :D
by 35NCO
Mon Jan 23, 2017 11:24 am
Forum: NFA Weapons
Topic: 4.375in DI 9mm AR
Replies: 25
Views: 11110

Re: 4.375in DI 9mm AR

This is really impressive. Seriously, Great job man! Can you post some of your data on your thought process for determining the energy necessary for gas flow and volume to move a specific mass over a given distance on this type of application? I have some idea how that works, but I was wondering if ...
by 35NCO
Tue Sep 13, 2016 8:54 pm
Forum: Legal and Political
Topic: Who does this guy think he is? Stating that he doesn't need a stamp for F1?
Replies: 48
Views: 4176

Re: Who does this guy think he is? Stating that he doesn't need a stamp for F1?

Well that sure escalated quickly.

I guess I lost track of who supports what and WTF you are all arguing over. But at least I know I agree with some of you.

We are on a effing silencer website. How could anyone here, possibly be on different sides?
by 35NCO
Tue Sep 13, 2016 9:22 am
Forum: Legal and Political
Topic: Who does this guy think he is? Stating that he doesn't need a stamp for F1?
Replies: 48
Views: 4176

Re: Who does this guy think he is? Stating that he doesn't need a stamp for F1?

[quote="cpy911"] (...... If he didn't call all of us idiots for paying the tax, I wouldn't care, but this guy is just a jerk and maybe deserves some Fed visits.) This is the slip I am talking about. Step outside of the emotion and consider what you are saying. You would have someone imprisoned and c...
by 35NCO
Tue Sep 13, 2016 9:10 am
Forum: Legal and Political
Topic: Who does this guy think he is? Stating that he doesn't need a stamp for F1?
Replies: 48
Views: 4176

Re: Who does this guy think he is? Stating that he doesn't need a stamp for F1?

Nothing is private or sacred online. Really, for any electronic device today. Always consider that every device or connection is speaking something about you, even if you ask it not to. Needless to say, Google, Amazon ext, are some of the largest intelligence gathering agencies in the world, but tha...
by 35NCO
Mon Sep 12, 2016 1:52 pm
Forum: Legal and Political
Topic: Who does this guy think he is? Stating that he doesn't need a stamp for F1?
Replies: 48
Views: 4176

Re: Who does this guy think he is? Stating that he doesn't need a stamp for F1?

I don't think the ATF will do that based on JUST this guy. However, if you look at NFA stuff on youtube, there is no shortage of illegal activities going on. I would think that would be a full time job in itself trying to track down every single one. I doubt they do that. I think it was just an idio...
by 35NCO
Mon Sep 12, 2016 12:37 pm
Forum: Legal and Political
Topic: Who does this guy think he is? Stating that he doesn't need a stamp for F1?
Replies: 48
Views: 4176

Re: Who does this guy think he is? Stating that he doesn't need a stamp for F1?

He is located in Florida, the exact location, time and date of each video is available if you look deeper. His real name and current address is also searchable based off that data. I do not think it is an ATF sting based on looking at his other videos. I think its just an idiot. They live among us. ...
by 35NCO
Tue Aug 30, 2016 12:35 pm
Forum: Legal and Political
Topic: ATF Arrests Man For eBay Silencer Sales
Replies: 4
Views: 2226

ATF Arrests Man For eBay Silencer Sales

Because no one here saw this one coming..... :roll: http://www.thefirearmblog.com/blog/2016/08/30/ebay-silencer-arrest/ http://www.wfmj.com/story/32807776/atf-arrests-east-palestine-man-with-nearly-200-firearm-silencers “EAST PALESTINE, Ohio – An East Palestine man may find out this week if he’ll be...
by 35NCO
Tue Aug 16, 2016 2:38 pm
Forum: Magpul
Topic: Interior wireless problem
Replies: 1
Views: 11795

Re: Interior wireless problem

Are you spamming us? It is illegal to Jam in the US. Ask the FCC. You also have tremendous liability jamming multibands of cells phones with what you are claiming. You are talking about wiping out GSM and 3g/4g/LTE and some CDMA. There is case law of people that did not know any better being prosecu...
by 35NCO
Wed Aug 10, 2016 1:56 pm
Forum: Silencersmithing Forum
Topic: .308 Brake Mounted Suppressor (Picture heavy)
Replies: 23
Views: 7998

Re: .308 Brake Mounted Suppressor (Picture heavy)

Awesome! Nice job man. Thanks for sharing. Looking forward to seeing more.
by 35NCO
Fri Jul 29, 2016 10:41 am
Forum: Legal and Political
Topic: DDTC Issues Guidance on ITAR Registration
Replies: 0
Views: 554

DDTC Issues Guidance on ITAR Registration

http://pmddtc.state.gov/compliance/Applicability%20of%20the%20ITAR%20Registration%20Requirement%20to%20Firearms%20Manufacturers%20(Publish).pdf https://blog.princelaw.com/2016/07/25/ddtc-issues-guidance-on-itar-registration/ Seems like things just got worse....What now? 1. Registration not Required ...
by 35NCO
Fri Jul 08, 2016 2:21 pm
Forum: Silencer Talk
Topic: WTF Suppressor design for sale on GB
Replies: 8
Views: 725

WTF Suppressor design for sale on GB

http://www.gunbroker.com/item/568244614 "I invented this silencer when I was a top physics student in a top engineering school 30 years ago. This design can achieve 22 long rifle ammo sound intensity of 97 db with a 6″ barrel. (Intensity; the lower the better). Till today; even 113 db will cause som...
by 35NCO
Thu Feb 18, 2016 12:16 pm
Forum: Silencer Talk
Topic: Book on Cans to Scan while on the Can :)
Replies: 2
Views: 3166

Re: Book on Cans to Scan while on the Can :)

I read it. Lots of good info, a fair bit of bad info. I had the most trouble dealing with the terrible editing. It read like it was not proof read at all. However, I have a early release, so maybe this was hashed out later. Either way, glad he put it out there. The effort put into the material and o...
by 35NCO
Sun Feb 15, 2015 11:33 am
Forum: Gun Discussion
Topic: Ban on M855
Replies: 25
Views: 3476

Re: Ban on M855

The ONLY pro 2nd POTUS we ever had was Jefferson. What about Teddy? The libs then hated him with a passion because he was so pro-gun. He also owned many Maxim cans. But agree, with today's political spectrum we are more likely to get a New Jersey or Massachusetts mindset type "conservative" preside...
by 35NCO
Thu Feb 27, 2014 9:05 pm
Forum: Legal and Political
Topic: Why SBR/SBS included in NFA of 1934?
Replies: 20
Views: 1034

Re: Why SBR/SBS included in NFA of 1934?

Have you searched or contacted the library of congress yet or made a request in reference to research of the NFA of 34? There must be something from the committees and hearings on the record. It can't be all gone. Another method, although it takes awhile, is to do a Freedom of Information Act Reques...
by 35NCO
Thu Feb 27, 2014 8:52 am
Forum: Legal and Political
Topic: Why SBR/SBS included in NFA of 1934?
Replies: 20
Views: 1034

Re: Why SBR/SBS included in NFA of 1934?

You might want to show how weird it is getting with the Sig Arm Braces, the Franklin "pistol" that is not a SBR or AOW, and those little lever actions with the "stocks", AR and AK pistols, MP5 clone pistols, Uzi pistols ext. The fact that those are all "concealable" and not regulated under NFA and s...
by 35NCO
Thu Feb 27, 2014 8:36 am
Forum: Legal and Political
Topic: Jailbreaking Cans and NOT being a Type 07 question
Replies: 4
Views: 562

Re: Jailbreaking Cans and NOT being a Type 07 question

Thank you for your reply. Is this because of the "silencer parts" area of the law? The reason I ask is because if the OAL does not change, the tube does not change, Baffle stack does not change, caliber does not change, all on the form 4, why would it be considered a new manufacture? In reference to...