Search found 1210 matches

by bonebreak2000
Sun Oct 09, 2011 11:33 am
Forum: Classified Ads
Topic: Leupold Mark 4 1.5-5x20mm MR/T M2 Scope **SOLD**
Replies: 1
Views: 493

Leupold Mark 4 1.5-5x20mm MR/T M2 Scope **SOLD**

Leupold Mark 4 1.5-5x20mm MR/T M2 Machined matched and Serial Numbered Badger Ordnance Rings $800.00 shipping in the cont. US is included in that price This scope was mounted on an FS2000 for a while and has been in my safe for the last year. In close to perfect condition. This is the illuminated ve...
by bonebreak2000
Mon Sep 26, 2011 5:12 pm
Forum: NFA Weapons
Topic: SBR a scar 17s
Replies: 12
Views: 6244

Re: SBR a scar 17s

thing is pretty.
by bonebreak2000
Thu Sep 22, 2011 5:14 pm
Forum: NFA Weapons
Topic: SBR a scar 17s
Replies: 12
Views: 6244

Re: SBR a scar 17s

You might wanna give the guys at AAC a call to make sure there isnt a pressure problem with going that short on the barrel for that can. I know you can use it on a 16 inch barrel but a 10.5 might be kinda nuts.
by bonebreak2000
Thu Sep 08, 2011 2:47 pm
Forum: Rifle Discussion
Topic: M4-2000 Blackout mount on stg556 Pics questions
Replies: 4
Views: 2277

Re: M4-2000 Blackout mount on stg556 Pics questions

When I put the mount on mine it bottomed out on the treads before the muzzle contacted the inside shoulder in the mount. This caused it to not be centered properly which would cause a baffle strike. I ended up flattening out the muzzle with a file slightly and using a small fine file to add one mor...
by bonebreak2000
Thu Sep 01, 2011 2:22 pm
Forum: Rifle Discussion
Topic: M4-2000 Blackout mount on stg556 Pics questions
Replies: 4
Views: 2277

Re: M4-2000 Blackout mount on stg556 Pics questions

There isnt enough room for that without shortening it below 16 inches.
by bonebreak2000
Wed Aug 31, 2011 10:44 pm
Forum: Classified Ads
Topic: Anyone need a used m4-1000 18T mount
Replies: 5
Views: 643

Re: Anyone need a used m4-1000 18T mount

This is the old 762 and m41000 18 tooth mount but this its only for a .556 because of the size of the hole.
by bonebreak2000
Wed Aug 31, 2011 8:09 pm
Forum: Classified Ads
Topic: Anyone need a used m4-1000 18T mount
Replies: 5
Views: 643

Anyone need a used m4-1000 18T mount

SPF Anyone need a used m4-1000 18T mount. Ive had this sitting in a drawer for a few years. It has some obvious wear on it. The inside has a kind of chalky green on it. There was some of this on the outside as well. It wiped away with an anti rust rag fairly easily. I think this might of been form ...
by bonebreak2000
Tue Aug 30, 2011 11:44 pm
Forum: Rifle Discussion
Topic: M4-2000 Blackout mount on stg556 Pics questions
Replies: 4
Views: 2277

M4-2000 Blackout mount on stg556 Pics questions

So I toke the standard FH off the stg556. But the threads are very long. To the point where I want to get a second opinion on it before using the rockset on the new mount. Take a look at these pics. Is this spacing ok? It never butts up against a flat surface like all my other mounts, cans have. How...
by bonebreak2000
Fri Aug 19, 2011 12:59 pm
Forum: Gear
Topic: Good place to buy a Vortex Viper PST 6-24x50 FFP
Replies: 14
Views: 3987

Re: Good place to buy a Vortex Viper PST 6-24x50 FFP

libertyman777 wrote:Scott Berish at Liberty Optics.

http://www.libertyoptics.com/

He's a good guy. Call him, he is usually well under the MAP prices listed on the website.

Paul

Wow thanks for the tip. he is back ordered on them but say it should be 2 weeks. He gave me a great price.
by bonebreak2000
Thu Aug 18, 2011 5:55 pm
Forum: Gear
Topic: Good place to buy a Vortex Viper PST 6-24x50 FFP
Replies: 14
Views: 3987

Re: Good place to buy a Vortex Viper PST 6-24x50 FFP

Thats funny I just passed on a 308 setup that I love simply because I wanted 24x over the 14x that came on that rifle.
by bonebreak2000
Thu Aug 18, 2011 11:57 am
Forum: Gear
Topic: Good place to buy a Vortex Viper PST 6-24x50 FFP
Replies: 14
Views: 3987

Re: Good place to buy a Vortex Viper PST 6-24x50 FFP

yeah i noticed the lead time actually shows on amazon which is nice. http://www.amazon.com/Vortex-Viper-6-24x50-Riflescope-PST-624F1-M/dp/B003AQWF54/ref=sr_1_3?ie=UTF8&qid=1313682932&sr=8-3 But if you cant rely on that whats the point. The nice thing is there are several other sites that appear to h...
by bonebreak2000
Thu Aug 18, 2011 9:32 am
Forum: Gear
Topic: Good place to buy a Vortex Viper PST 6-24x50 FFP
Replies: 14
Views: 3987

Re: Good place to buy a Vortex Viper PST 6-24x50 FFP

Wahnsinn wrote:OpticsPlanet is $899
Yeah sorry I meant to write 899 in my post. not sure why I wrote 999. Thanks for the other tip on samplelist. I'll check that place out.
by bonebreak2000
Wed Aug 17, 2011 8:53 pm
Forum: Gear
Topic: Good place to buy a Vortex Viper PST 6-24x50 FFP
Replies: 14
Views: 3987

Good place to buy a Vortex Viper PST 6-24x50 FFP

Good place to buy a Vortex Viper PST 6-24x50 FFP

Anyone have a spot with a good deal? Most places online seem to keep it at the 999 retail.

Thanks
by bonebreak2000
Wed Aug 17, 2011 8:51 pm
Forum: Rifle Discussion
Topic: M4-2000 black out mount on the STG556
Replies: 2
Views: 1767

Re: M4-2000 black out mount on the STG556

Thanks for this. These are the instructions microtech gave me via emial.: Look first at your flashhider- right behind it you may or may not have a silver ring. If you have that silver ring, your barrel has the 13x1.0mmLH threads. If you have no such ring nor groove for one, your barrel has the 1/2-2...
by bonebreak2000
Tue Aug 16, 2011 4:24 pm
Forum: Rifle Discussion
Topic: M4-2000 black out mount on the STG556
Replies: 2
Views: 1767

M4-2000 black out mount on the STG556

I have the stg556. I am told that it uses the standard aug pitch (13 x1 lh)on the barrel for the flash hider. I notice that AAC now offers the blackout 51 tooth adapter in this thread pitch. http://www.advanced-armament.com/product.aspx?pid=493 Am I to understand that I cn simply remove the factory ...
by bonebreak2000
Wed Jul 27, 2011 10:45 am
Forum: Classified Ads
Topic: WTB Bolt Rifle
Replies: 2
Views: 337

WTB Bolt Rifle

Looking at getting a nice long range rifle. Anyone looking to move a nice set up? I'll consider any package suppressed or not, adapter or not. LMK what ya got. Figured I might as well check before I go buy new. I'm open to looking at anything from .308 to something that will reach out to 1,000 yards...
by bonebreak2000
Sat Feb 26, 2011 11:10 pm
Forum: AAC
Topic: question about the evo-9 rear cap
Replies: 5
Views: 351

Re: question about the evo-9 rear cap

will that toast the oring? I guess it doesnt matter either way i need to do something. It aint coming off in its current state.
by bonebreak2000
Sat Feb 26, 2011 5:43 pm
Forum: AAC
Topic: question about the evo-9 rear cap
Replies: 5
Views: 351

question about the evo-9 rear cap

Ok so I havent used my tri lug in maybe a year. So I am preparing my stuff for tomorrow and I can not seem to unscrew the rear cap of the ASP with the 2 prong tool. This is standard threading right not reverse threaded? I have been at it for an hour and I dont know what else to do.
by bonebreak2000
Wed Jan 13, 2010 4:11 pm
Forum: South West
Topic: new mexico checking in
Replies: 33
Views: 15637

Welcome down. There are a few ranges here but all of them are pretty far from you. You might look at Del Norte they are NFA friendly as is calibers.
by bonebreak2000
Wed Jan 06, 2010 10:57 am
Forum: South West
Topic: Albuquerque, NM Form 4 CLEO Sign off
Replies: 6
Views: 31321

Get it done is Santa Fe. State Police HQ. They will sign off on you.

Whats up Jeepjr. Welcome to the scene. Where abouts in ABQ do you shoot your C3?
by bonebreak2000
Mon Jan 04, 2010 10:25 am
Forum: Rifle Discussion
Topic: Monolith Front Grip/ Rail System
Replies: 21
Views: 32824

:oops: Oh yeah.. No actually I just put the vert grip on there to show it mounted. I got the one early from monolith to do some testing and pseudo review it for them before it hit the market for the brief time that it did. That picture was taken to just show accessories mounted to it. I suppose I co...
by bonebreak2000
Sat Jan 02, 2010 8:11 pm
Forum: Classified Ads
Topic: *****BOTH SOLD ****** FN FS2000 Monolith Arms Front Grips
Replies: 2
Views: 808

V1 is sold. Still have the V2
by bonebreak2000
Sat Jan 02, 2010 8:10 pm
Forum: Rifle Discussion
Topic: Monolith Front Grip/ Rail System
Replies: 21
Views: 32824

huh?
by bonebreak2000
Thu Dec 31, 2009 1:04 am
Forum: Rifle Discussion
Topic: Monolith Front Grip/ Rail System
Replies: 21
Views: 32824

not sure how many FN guys check out the FS forums so FYI

viewtopic.php?p=502835#502835