SOLD

Leupold Mark 4 1.5-5x20mm MR/T M2 Machined matched and Serial Numbered Badger Ordnance Rings $800.00 shipping in the cont. US is included in that price This scope was mounted on an FS2000 for a while and has been in my safe for the last year. In close to perfect condition. This is the illuminated ve...

thing is pretty.

You might wanna give the guys at AAC a call to make sure there isnt a pressure problem with going that short on the barrel for that can. I know you can use it on a 16 inch barrel but a 10.5 might be kinda nuts.

When I put the mount on mine it bottomed out on the treads before the muzzle contacted the inside shoulder in the mount. This caused it to not be centered properly which would cause a baffle strike. I ended up flattening out the muzzle with a file slightly and using a small fine file to add one mor...

There isnt enough room for that without shortening it below 16 inches.

This is the old 762 and m41000 18 tooth mount but this its only for a .556 because of the size of the hole.

SPF Anyone need a used m4-1000 18T mount. Ive had this sitting in a drawer for a few years. It has some obvious wear on it. The inside has a kind of chalky green on it. There was some of this on the outside as well. It wiped away with an anti rust rag fairly easily. I think this might of been form ...

So I toke the standard FH off the stg556. But the threads are very long. To the point where I want to get a second opinion on it before using the rockset on the new mount. Take a look at these pics. Is this spacing ok? It never butts up against a flat surface like all my other mounts, cans have. How...

libertyman777 wrote:Scott Berish at Liberty Optics.

http://www.libertyoptics.com/

He's a good guy. Call him, he is usually well under the MAP prices listed on the website.

Paul

Wow thanks for the tip. he is back ordered on them but say it should be 2 weeks. He gave me a great price.

Thats funny I just passed on a 308 setup that I love simply because I wanted 24x over the 14x that came on that rifle.

yeah i noticed the lead time actually shows on amazon which is nice. http://www.amazon.com/Vortex-Viper-6-24x50-Riflescope-PST-624F1-M/dp/B003AQWF54/ref=sr_1_3?ie=UTF8&qid=1313682932&sr=8-3 But if you cant rely on that whats the point. The nice thing is there are several other sites that app...

Wahnsinn wrote:OpticsPlanet is $899

Yeah sorry I meant to write 899 in my post. not sure why I wrote 999. Thanks for the other tip on samplelist. I'll check that place out.

Good place to buy a Vortex Viper PST 6-24x50 FFP

Anyone have a spot with a good deal? Most places online seem to keep it at the 999 retail.

Thanks

Thanks for this. These are the instructions microtech gave me via emial.: Look first at your flashhider- right behind it you may or may not have a silver ring. If you have that silver ring, your barrel has the 13x1.0mmLH threads. If you have no such ring nor groove for one, your barrel has the 1/2-2...

I have the stg556. I am told that it uses the standard aug pitch (13 x1 lh)on the barrel for the flash hider. I notice that AAC now offers the blackout 51 tooth adapter in this thread pitch. http://www.advanced-armament.com/product.aspx?pid=493 Am I to understand that I cn simply remove the factory ...

Looking at getting a nice long range rifle. Anyone looking to move a nice set up? I'll consider any package suppressed or not, adapter or not. LMK what ya got. Figured I might as well check before I go buy new. I'm open to looking at anything from .308 to something that will reach out to 1,000 yards...

will that toast the oring? I guess it doesnt matter either way i need to do something. It aint coming off in its current state.

Ok so I havent used my tri lug in maybe a year. So I am preparing my stuff for tomorrow and I can not seem to unscrew the rear cap of the ASP with the 2 prong tool. This is standard threading right not reverse threaded? I have been at it for an hour and I dont know what else to do.

:oops: Oh yeah.. No actually I just put the vert grip on there to show it mounted. I got the one early from monolith to do some testing and pseudo review it for them before it hit the market for the brief time that it did. That picture was taken to just show accessories mounted to it. I suppose I co...

V1 is sold. Still have the V2

huh?

not sure how many FN guys check out the FS forums so FYI

viewtopic.php?p=502835#502835

So here is the deal. I have just 2 of these. Both have been used on the weapon. Very limited in use. I would say the V1 had maybe 80 rounds shot while it was on and the v2 had another 40. The main differences other than look are the bottom rail is metal on the v2 and polymer on the v1. The side rail...

FN FS2000 $1650.00 caliber: 223 / 5.56 Prefer to sell locally FTF. I am in Albuquerque NM $1650 I'm not opposed to shipping it but shipping will be extra. Gun is in 99% shot 150 rounds Black Version flat top Just the stock gun is included. None of the accessories in the picture. http://i21.photobuck...