Thanks for the replies. I went and contacted Curtis Tactical and Joe will be doing the recore. As far as recoring myself, that's a whole lotta nope. I value my freedom and do not wish to have my s--t pushed in..... I know all the DIY options out there and would only go that route again if starting a...

Who out there is still recoring form 1 cans? I am having no luck except Rusty's and thats a bit on the high end dollar wise....

http://i1027.photobucket.com/albums/y334/ronaldparker762/100_7156_zpszgf74g0m.jpg Sights are only temporary until I can get a good scope and mount. 18" rifle gas barrel with a set screw FSB forward the low pro gas block (dissipator style) Can is my form 1 in 7.62. Have a 1/2x28 to 5/8 x 24 thr...

http://i1027.photobucket.com/albums/y334/ronaldparker762/100_7156_zpszgf74g0m.jpg Sights are only temporary until I can get a good scope and mount. 18" rifle gas barrel with a set screw FSB forward the low pro gas block (dissipator style) Can is my form 1 in 7.62. Have a 1/2x28 to 5/8 x 24 thr...

So I am looking to get a small lathe to attempt to make cones and spacers AND possibly a tube for my 2nd form 1 can and would like some info from those who have lathe experience. I am looking at either of these lathes right now as I am on a budget and don't see turning anything larger than these can...

I no longer need my JS Tactical D forming tool. Used to form 15 FP and that's it. Would like to get $90.00 shipped discreet PP. Cross posted. Post an I'll take it and PM for PP info. http://i1027.photobucket.com/albums/y334/ronaldparker762/IMG_2509_zpsgnix1qrf.jpg http://i1027.photobucket.com/albums...

Reflex means it slips back over the barrel. What you have is not a reflex, as the entire length of the can is added to the muzzle of the host weapon. The 'barrel extension' inside the can will not help sound reduction. If you remove the barrel extension and add more baffles in its place you will im...

Every reflex can I've heard seems quieter than a non reflex design. Just in the planning stages now so nothing is certain yet.

So I finally got my approved Form 1 back and have started planning my build. I know a reflex can is supposed to slip over the barrel to make it overall shorter but I want to use this on a couple different rifles so I had a thought about the can being an all-in-one reflex unit. Jist is it will be bui...

Still waiting on mine but the correct cal for 300 blk is 7.62

Does the caliber of the suppressor need to be engraved as well? Everything I've seen doesn't specify but I'm being told by a company that it does...

Welp, as of 2 minutes ago I submitted my Form 1. Now the waiting game.

Thanks.

I saw it and lost it and Googlefu is not helping. What part of the trust documentation needs to be filed with the Eform 1?

Don't want to submit more than I need to.

Thanks for any help

I'm in Glendale/ N Phoenix. OK. So another thought I've been having. Right now my blk is a pistol. If I were to make a tube out of stainless and pin and weld that to the barrel for a total over 16", could I then make a core that threads into it? this way it can be removed for cleaning or what n...

Would the type of tube material have an effect on performance or does it all depend on baffle type and spacing?

New guy here from AZ. Built a 8.5" barreled 300blk upper in hopes to eventually get a can. I have decided to Form 1 one and build it myself and have a question. I would like to keep the overall length down to around 16" total with barrel and can. With such a short barrel will 6" to 7 ...