serg-pl wrote:

This is a very impressive design. I look forward to seeing it modeled.

I sent you three of mine. Thanks

Has anyone created a "Solvent Trap" style silencer thats ejects the spent shell, cocks the hammer, and loads a new round for a Beretta 9mm 92A? My attempt has resulted in a good noise reduction while firing a subsonic 9mm round, but it never ejects the fired round. I've tried replacing th...

This came across my Facebook today. Enjoy.

subscribed

Bore was 9/32 and here is some more info. 516, 16" m4 profile barrel with 1/7 twist. The ammo was bulk m885 green tip. This was the first test other than a few sound checks in to a berm. I looked down the barrel before and after with and without the can. The brake is shimmed and has rocksett. T...

I was attacking it the wrong way and got the cap off. It looks like the last two baffles got tagged too. Now I'm real lost on how to fix it. http://i1091.photobucket.com/albums/i395/rich93ds/guns/86454332-6BEE-4A2D-9931-04150DB9B8C6_zpsxgljoc6w.jpg http://i1091.photobucket.com/albums/i395/rich93ds/g...

I took my ar to the range for the first time and rezeroed my eotech without the can on. I put it on and it was not even on the a silhouette at 25 yards. After it cooled and I was home I got out a light and checked everything I could see. And I don't know about the baffles because I can't get it back...

Another picture in my case. My official suppressor case. And size comparison with my MacBook http://i1091.photobucket.com/albums/i395/rich93ds/guns/EA6F5467-3B30-4499-9748-D85E0714844F_zpsbgw6ukwi.jpg http://i1091.photobucket.com/albums/i395/rich93ds/guns/819D528E-AFB9-469C-AC05-F9FD54D6FF0B_zps6idd...

Well I could not live with the multi colored suppressor. I picked up some 2000° vht header paint and painted it last night. I baked it in my bbq grill to cure the paint. So I think it's finally finished. http://i1091.photobucket.com/albums/i395/rich93ds/guns/B574A3E3-BFD9-4747-9EED-CC8FD131FF71_zps2...

Small update- I got some subs from Detroit Bullet Works and sent a few down range. I can not believe how quiet it is. I can shoot them out the back door the garage and you can hear it from the door to the house

Ok, thanks. I think I might try a peel washer too.

Sorry for no update... As it turns out, I definitely need to do something about the engravings. I can see them... because I know where they are. Part of why I went with the VHT (other than the cost) was that it is supposed to be reasonably robust, some kind of ceramic base to it, so I don't know ab...

I always clean with 90+% isopropanol as the last step and blow dry. Then get the treads wet with Rocksett ... 2 drops seldom enough ... but be careful not to get any in the bore. I often put a patch into the bore and make sure it shows out the end of the muzzle. Then I heat it some with a heat gun ...

I'm trying to get my brake on so I can use my suppressor but I'm having issues. I got a AAC shim kit and rocksett from brownells last week. I tried installing it yesterday but I'm running in to some issues. The only combination of shims that got it close was bearly tight (hand tight) but after readi...

5.56 titanium freeze plug build

viewtopic.php?f=10&t=135243

c5_nc wrote:I"ve heard a few both ways and the us clipped were loud in comparison but the clipped one started spreading out very quickly. If doing it again the smaller dual clips I would try.

Like yoda you speak

It's late and I got it finished but I did not take any more pictures. I'll have more tomorrow. I did three rounds of m855 ball with the gas system off in the field where I shoot. I've never heard a commercial suppressor before so I can't say to how quiet it is but I did it without earpro and it was ...

We had a hell of a time anodizing everything. It is nothing like the YouTube videos. But I got enough color to prevent the threads galling.

I'm going to clip all but the first and last to start. I'm in for the long haul tonight. I'm starting the anodizing right now. I'll try and keep this updated http://i1091.photobucket.com/albums/i395/rich93ds/guns/020620D9-A060-4E80-AB31-E9C307A31C64_zps5ci0jexr.jpg Is the watermelon a secret ingred...

I'm going to clip all but the first and last to start.

I'm in for the long haul tonight. I'm starting the anodizing right now. I'll try and keep this updated

I just picked up everything to anodize all of the titanium. I will be posting progress pictures and everything I used. I'm hoping to get everything except for a test fire done tonight.

I was looking at the drawing and layout of everything and if I move the coin baffle within a couple millimeters of the brake I can fit another formed freeze plug. That would leave me with the blast chamber being the area around the brake. Before I cut my spacers I wanted to get some opinions. Would...