Search found 239 matches

by Hannibalbarca
Wed Dec 09, 2020 3:47 am
Forum: Silencer Talk
Topic: Erosion pictures - form 1 vs commercial
Replies: 4
Views: 2174

Erosion pictures - form 1 vs commercial

Post your pictures of baffle erosion. This site works well for photo hosting https://imgbb.com/ Form 1 and commercial cans. Just add some information regarding the baffle material, cone type, distance to bore, muzzle device used and estimated round. Maybe type of ammo used as well. Very curious abou...
by Hannibalbarca
Mon Dec 07, 2020 9:47 am
Forum: Classified Ads
Topic: WTB AAC 51T 1/2x28 BREAKOUT
Replies: 2
Views: 2570

Re: WTB AAC 51T 1/2x28 BREAKOUT

https://www.tntgear.com/catalog/product ... .php?ID=83
The money you spend on this should go towards replacing this crappy system. Have Ecco to replace the mount with 1.375x24 threads
by Hannibalbarca
Sun Dec 06, 2020 1:43 am
Forum: Classified Ads
Topic: WTS - zmachineworx 60 cones, cap, booster, B cell cups, direct thread adapters, others
Replies: 0
Views: 2085

WTS - zmachineworx 60 cones, cap, booster, B cell cups, direct thread adapters, others

For sale is ——7 60 degree zmachineworx 17-4 cones 1.355 20$ each ——2 radial zmachineworx 17-4 cones 1.355 20$ each ——4 formed stainless freeze plugs 5$ each(if you buy a couple of the zmachineworx I’d like to bundle these) ——1 old style grade 5 ti d cell cap from sdta 35$ ——3 316L B cell cups 12.5$ ...
by Hannibalbarca
Fri Dec 04, 2020 6:05 pm
Forum: Silencersmithing Forum
Topic: Need some machine work done - anyone?
Replies: 0
Views: 1770

Need some machine work done - anyone?

Hello I will be doing a form 1 in the future for an integral 12 gauge vepr 12 I need someone to make the kit Its fairly simple as far as kits go. A 12 inch long 3 inch od grade 2 titanium tube threaded on both ends(60 shipped for the tube) from titanium joe, its 3 od with a .035 wall I found some 60...
by Hannibalbarca
Tue Feb 19, 2019 5:06 am
Forum: Silencer Talk
Topic: Aluminum tube standing up to heat and pressure? Titanium spacers.
Replies: 1
Views: 1552

Aluminum tube standing up to heat and pressure? Titanium spacers.

It is a given that aluminum is weak and can fail very fast with an bar and rapid fire but how do the other parts of the suppressor play a part? If you have titanium end caps and stainless baffles and titanium spacers, how much heat do they soak up and do the spacers bear the brunt of the pressure wh...
by Hannibalbarca
Mon Feb 18, 2019 10:49 am
Forum: Silencer Talk
Topic: Looking for Custom Suppressor for sporting shotguns
Replies: 5
Views: 1435

Re: Looking for Custom Suppressor for sporting shotguns

fishman wrote:Copy a salvo12
That’s going to be difficult. He could just do an integral, much easier than messing with alignment rods for individual baffles.
by Hannibalbarca
Sat Feb 02, 2019 2:55 am
Forum: Silencersmithing Forum
Topic: 30 cal build idea
Replies: 16
Views: 4099

Re: 30 cal build idea

If you're going through all the trouble, why settle for less? Going from a 1.5 OD to a 2" will increase initial weight by 35%, not counting the 90% more your end caps will be. You could use an 8" length of 1.5 tube and have a much better design, and be < the weight of the larger one. A lo...
by Hannibalbarca
Tue Nov 06, 2018 3:10 pm
Forum: Silencersmithing Forum
Topic: Looking for a recore
Replies: 11
Views: 2330

Re: Looking for a recore

If it’s for something that someone makes cones for just do it yourself. Is it d cell 1.347/1.355? Plenty of makers of cones. Yes, let's encourage our members to commit felonies. Good plan :roll: And who’s going to know? And felonies? Yeah that’s the interpretation of the useless worthless atf made ...
by Hannibalbarca
Tue Nov 06, 2018 1:17 am
Forum: Silencersmithing Forum
Topic: Looking for a recore
Replies: 11
Views: 2330

Re: Looking for a recore

If it’s for something that someone makes cones for just do it yourself. Is it d cell 1.347/1.355? Plenty of makers of cones.
by Hannibalbarca
Fri Oct 12, 2018 6:26 pm
Forum: Silencersmithing Forum
Topic: will parkerizing effect threads on suppressor?
Replies: 24
Views: 3533

Re: will parkerizing effect threads on suppressor?

Have a can in the works, tube and end caps are 4130 and 4140. It will be a welded can, but i have the mounting hole threaded. It's going to be a direct mount, 1/2-28" threads. Do I need to cover the threads somehow, or will it not really matter? I’d parkerize them to protect against corrosion ...
by Hannibalbarca
Tue Oct 02, 2018 6:35 pm
Forum: Silencersmithing Forum
Topic: M? Baffle Design. Please evaluate
Replies: 15
Views: 5897

Re: M? Baffle Design. Please evaluate

I have an idea for you. First off, have the tube body be 17-4 stainless for the best durability but grade 9 tubing could also work or grade 5 from bar stock, depends on budget and ability. You’d need to get bar stock and hollow it out. Make it thin walled too. Have it be modularized with two section...
by Hannibalbarca
Sat Jul 21, 2018 1:04 pm
Forum: Silencersmithing Forum
Topic: another modular suppressor question
Replies: 7
Views: 2455

Re: another modular suppressor question

Just make it normally, don’t do different Id or anything like that.
No ones going to care, manufactures make it like that, no reason you aren’t able to as well.
by Hannibalbarca
Tue Jul 17, 2018 12:23 am
Forum: Silencersmithing Forum
Topic: 5.56mm Sealed Can Build - Ongoing - UPDATE 10/6/2017
Replies: 53
Views: 33906

Re: 5.56mm Sealed Can Build - Ongoing - UPDATE 10/6/2017

Did you think about doing an inconel or stellite blast baffle(s)?
Maybe doing a different baffle design like that of the griffin suppressors?
Some ideas for a future project perhaps.
by Hannibalbarca
Fri Jul 13, 2018 6:24 pm
Forum: Silencer Reviews
Topic: Obsidian or Griffin Resolution 9 mm?
Replies: 20
Views: 17467

Re: Obsidian or Griffin Resolution 9 mm?

Out of those two I'd probably go Griffin if you plan on putting in on a rifle sometimes. Overall, if I were buying a 9mm can, I'd get a CGS Kraken. Why would you go with baffles made from 7075 aluminum vs heat treated 17-4 stainless? I was under the impression that the Griffin is more versatile. Am...
by Hannibalbarca
Thu Jul 12, 2018 3:11 pm
Forum: Random Talk
Topic: Does anybody know where I can buy fake ID?
Replies: 7
Views: 4918

Re: Does anybody know where I can buy fake ID?

I found a place that'll sell you a real ID. Service is sometimes sub-par. It's a fake, fake ID. That other guy is funny. I think he assumed that Silencer Talk was some kind of underground hive of illicit activities. Because... you know... suppressors. Can the mods please ban him and delete all his ...
by Hannibalbarca
Wed Jul 11, 2018 4:39 pm
Forum: Silencer Reviews
Topic: Obsidian or Griffin Resolution 9 mm?
Replies: 20
Views: 17467

Re: Obsidian or Griffin Resolution 9 mm?

BamaBred wrote:Out of those two I'd probably go Griffin if you plan on putting in on a rifle sometimes. Overall, if I were buying a 9mm can, I'd get a CGS Kraken.
Why would you go with baffles made from 7075 aluminum vs heat treated 17-4 stainless?
by Hannibalbarca
Mon Jul 09, 2018 11:32 pm
Forum: Silencersmithing Forum
Topic: increasing vs decreasing space between cones
Replies: 26
Views: 7566

Re: increasing vs decreasing space between cones

I think the mushroom cloud we see is just the same as the mushroom cloud from an atomic nuclear explosion. At first, the energy is so high that it rushes straight up, so fast that no sideways expansion happens. The low pressure of the air around it is of little concern. Then after travelling some d...
by Hannibalbarca
Mon Jul 09, 2018 11:23 pm
Forum: Silencer Reviews
Topic: Looking for Opinions on the best 5.7/22mag suppressor
Replies: 21
Views: 19189

Re: Looking for Opinions on the best 5.7/22mag suppressor

Why not form1? B cell tube from sd tactical and their caps with their booster or a booster from liberty which is stainless vs aluminum(and their fixed spacer mount for rifles). You can get spacers and cones from totality industries or from rusty at form1 suppressors if he offers them now. I’d go all...
by Hannibalbarca
Mon Jul 09, 2018 11:14 pm
Forum: Silencer Reviews
Topic: Obsidian or Griffin Resolution 9 mm?
Replies: 20
Views: 17467

Re: Obsidian or Griffin Resolution 9 mm?

I’d say the griffin. Several reasons. It uses 7075 t6 for the tube which is much better than 6061 aluminum. Griffin is a more established company than rugged suppressors It is rated for more calibers and at fairly short barrels even if you do have to wait to cool after 7 rounds. There are many acces...
by Hannibalbarca
Mon Jul 09, 2018 11:09 pm
Forum: Silencersmithing Forum
Topic: increasing vs decreasing space between cones
Replies: 26
Views: 7566

Re: increasing vs decreasing space between cones

A couple of small things I'm going to note. Blackout subs don't reach near 50k psi even at the chamber and certainly not at the muzzle. But I'm going to assume that you're just using 50k as a reference. Usually, a large expansion chamber exhibits a lot of first round pop. The more oxygen there is t...
by Hannibalbarca
Mon Jul 09, 2018 11:06 pm
Forum: Silencersmithing Forum
Topic: increasing vs decreasing space between cones
Replies: 26
Views: 7566

Re: increasing vs decreasing space between cones

But does it matter? That's what I'm curious about. Let's say the force is stronger in a particular area of the can. But why does that mean the chamber in that area should be large. Or small. Online I see theories going in both directions. Does it matter, and why? I honestly don't know. Because a la...
by Hannibalbarca
Fri Apr 20, 2018 7:20 pm
Forum: Silencer Talk
Topic: dead air mask .22 (anything else better?)
Replies: 14
Views: 12022

Re: dead air mask .22 (anything else better?)

The 'chubby' Aguila SSS 60 gr .22lr is a slow ~950 fps. It fires easily in an 1:8 twist barrel, e.g., the extraordinary Ray Brandes S&W 41 barrel. Like hearing results from anyone using the 'chubby' in their pistols. Some good YouTubes on their firing from rifle. More expensive than some others...
by Hannibalbarca
Mon Apr 16, 2018 10:36 pm
Forum: Silencer Talk
Topic: I want to build an upper for my SCR
Replies: 10
Views: 2071

Re: I want to build an upper for my SCR

Why not pin a QD muzzle device instead? Don't get me wrong, I have several dedicated designs, but why perm attach if not needed? Also, your nice warranty is most likely toast. The state I live in does not allow threaded barrels or muzzle devices such as muzzle brakes or flash hiders. Looking around...
by Hannibalbarca
Tue Apr 03, 2018 3:45 am
Forum: Silencersmithing Forum
Topic: 460 rowland suppressed - mac10 clone DIY delayed blowback
Replies: 63
Views: 14084

Re: 460 rowland suppressed - mac10 clone DIY delayed blowback

fishman wrote:No. The groove would need to be perpendicular to those
So the groove would be a ring or multiple rings? Is the chamber just as it is, with the end of the chamber where the case sits against, and in the chamber you have ringed grooves?