So what's keeping everything together then? Perfect balance between the first baffle spacer and the inner tube?

Neat, so the springs keep the tube under tension even though it's attached all the way at the gas port. Is there anything in between the rear end cap and the barrel or did you just machine it out to .750" for a tight fit? Working on my design and I'm trying to find a way to have the integral po...

Interesting, so how did you go about attaching that? Is the suppressor still mounted to the muzzle threading? Is the integral section open to the baffle section at all? How are you sealing the end closest to the receiver?

So I just noticed your barrel porting. Since they're not synchronized with the 1:7" barrel twist rate, are you running into any accuracy issues having drilled into lands and edges? What'd you do to shroud the ports?

Made any progress?

I imagine it would make a good hog cartridge if you're into that kind of stuff

So here's what I've mocked up. I eyeballed the size of things and it's mostly close, lengthwise. https://i.imgur.com/GnEPVP7h.jpg I did a bunch of research and came to the conclusion that the most effective design depends on a lot of factors, but I've got a couple questions. 1. Is the blast chamber ...

Hmm, so of something like these? https://m.youtube.com/watch?v=nOqNB4gSJqY
Any idea where to find those for D cell tubes?

I've got an 8" titanium tube on the way. Any recommendations for baffle configurations?

So what diameter are those bullets?

https://stores.csspecs.com/9x39-ak-pattern/
He doesn't have the 20rd mags up on the store right now but yeah, it's a 9x39 AK mag

So how are you doing handloads? Is the wolf bimetal case reloadable?

So any progress on the design of the silencer itself? I've got my own 9x39 AR project