Search found 20 matches
- Sat Mar 20, 2021 11:30 pm
- Forum: Silencer Reviews
- Topic: Best suppressor for 6.5 creedmoor
- Replies: 7
- Views: 11697
Re: Best suppressor for 6.5 creedmoor
LOL :D true Matt .... very true... is this Creedmopr gas or bolt? On my bolt action Remington 700 PCR in that caliber i'm using a Silencerco omega 300. Is it the quiestest? maybe... maybe not. but it is good across my platform of varying calibers except those larger than a .30 caliber bore. The POI ...
- Wed Jan 06, 2021 3:30 pm
- Forum: Legal and Political
- Topic: H.R. 5717 bill that restricts guns
- Replies: 22
- Views: 6934
Re: H.R. 5717 bill that restricts guns
with what is unfolding on congress'es steps I figured that this would be a way more hot topic.....
but i'm noticing banners on the news media "violent protester" but NO footage of such.
This was brought on by one side whom just had to poke "the bear"
but i'm noticing banners on the news media "violent protester" but NO footage of such.
This was brought on by one side whom just had to poke "the bear"
- Wed Jan 06, 2021 11:27 am
- Forum: Silencersmithing Forum
- Topic: No More Solvent Traps
- Replies: 44
- Views: 12611
Re: No More Solvent Traps
looking at 101 silent and Historian's post /replies on the "camshaft design" This will require a slight thread driff to a slight degree if there is not much discussion on this post. To have rifle or smoothbore will be a choice , neither would be a real bad choice. But if hooking two rifles...
- Wed Jan 06, 2021 10:10 am
- Forum: Legal and Political
- Topic: H.R. 5717 bill that restricts guns
- Replies: 22
- Views: 6934
Re: H.R. 5717 bill that restricts guns
I wish I could say my true thoughts .... but with the way our political system is going i can see where my opinions and thoughts used against me.
- Wed Jan 06, 2021 10:03 am
- Forum: Legal and Political
- Topic: Political /Refugee
- Replies: 8
- Views: 4672
Re: Political /Refugee
re education camps were our new Chinese masters decide ....
biden administration predicted and basically promised a dark future.
biden administration predicted and basically promised a dark future.
- Tue Jan 05, 2021 6:22 pm
- Forum: Silencersmithing Forum
- Topic: No More Solvent Traps
- Replies: 44
- Views: 12611
Re: No More Solvent Traps
Skimming through the article Historian gave a link to, and within that article Mr. Olsen's referal to "Mob Six" and the s--t vs good s--t rang true through all the branchs. The other part of the article was the Crankshaft design which I had seen posted elsewhere This one made by quicksilve...
- Mon Jan 04, 2021 7:17 pm
- Forum: Silencersmithing Forum
- Topic: No More Solvent Traps
- Replies: 44
- Views: 12611
Re: No More Solvent Traps
Another slant design Which "could" be modified to the simple flat washer https://i.pinimg.com/originals/41/1a/80/411a8051091fedda31b0590de144950c.jpg While that is actually a monocore it does show how a series of fender washer could be used with just a little bit of welding .. after weldin...
- Mon Jan 04, 2021 2:14 am
- Forum: Silencersmithing Forum
- Topic: No More Solvent Traps
- Replies: 44
- Views: 12611
Re: No More Solvent Traps
did sombody mention HK 5 SD baffles???
more effective than one would think
more effective than one would think
- Sun Jan 03, 2021 10:40 am
- Forum: Silencersmithing Forum
- Topic: Universal suppressor?
- Replies: 3
- Views: 2818
Re: Universal suppressor?
Unforurately ... the BATFE would consider extra baffles and wipes to constructive intent to be manufacture another suppressor reguardless if a registered tube / suppressor is present. Look at the Gemtech Aurora II it has 8 neoprene wipes and 3 petroleum jelly-filled spacer baffles. the design is rea...
- Sun Jan 03, 2021 12:15 am
- Forum: Silencersmithing Forum
- Topic: “Solvent traps”
- Replies: 30
- Views: 13597
Re: “Solvent traps”
BTW White russian I retired from a alphabet agency ......... DoD LMAO .... 30+ years in the Military turned me into a grumpy old man :D Never got into the private stamp collecting because of the fear of being stationed in a non suppressor friendly state ... but now retired not a problem. but this is...
- Sat Jan 02, 2021 6:24 pm
- Forum: Silencersmithing Forum
- Topic: “Solvent traps”
- Replies: 30
- Views: 13597
Re: “Solvent traps”
I noticed on the QuietBore site that to order a kit he is requiring a approved Form 1 to order /ship. Looks like he came to a agreement with BATFE to get them off his back.
- Sat Jan 02, 2021 4:15 pm
- Forum: Silencersmithing Forum
- Topic: Baffle Clip Advice requested
- Replies: 9
- Views: 5527
Re: Baffle Clip Advice requested
My earlier post was off topic in a majority of my information.. i aploogize ...the 45 can (YHM Wraith) is clipped the 9mm nope. looking through the YHM can I can see that the clips are aligned. As the YHM Wraith is sealed so i really cant take measurements of the baffles. again sorry about the topi...
- Sat Jan 02, 2021 1:42 pm
- Forum: Silencersmithing Forum
- Topic: Baffle Clip Advice requested
- Replies: 9
- Views: 5527
Re: Baffle Clip Advice requested
My earlier post was off topic in a majority of my information.. i aploogize Ecco and others seem to be on target. But going back to the two cans that I referanced one other point is that the 45 can (YHM Wraith) is clipped the 9mm nope. looking through the YHM can I can see that the clips are aligned...
- Fri Jan 01, 2021 12:08 pm
- Forum: AAC
- Topic: AAC Dead to me.
- Replies: 8
- Views: 12630
Re: AAC Dead to me.
Wondering if JJE Capital Holdings LLC accquiring AAC when Remington was auctioned off will improve things??
- Thu Dec 31, 2020 9:57 pm
- Forum: Silencersmithing Forum
- Topic: What would cause inaccuracy when hot?
- Replies: 13
- Views: 4538
Re: What would cause inaccuracy when hot?
yep noticed that too
- Thu Dec 31, 2020 9:14 pm
- Forum: Silencersmithing Forum
- Topic: What would cause inaccuracy when hot?
- Replies: 13
- Views: 4538
Re: What would cause inaccuracy when hot?
I have same issues with a AR9 pistol 3" barrel and 9mm can TI, SS and Steel construction i have..... baffle core diameter is at .398"....... switch to the 45 caliber subgun can.... bigger core diameter,,, 2" longer, Alum construction way more internal volume. All the issues goes away....
- Thu Dec 31, 2020 8:08 pm
- Forum: Silencersmithing Forum
- Topic: Serial number on silencer
- Replies: 20
- Views: 7192
Re: Serial number on silencer
For the serial number and model on a form 1 silencer can you use a steel stamping set? The outer will be aluminum. looks like the OP is using a differant allot than TI so what the hades does argon shelding on TI have to do with the question??? If he was using TI it would have everything to do with ...
- Thu Dec 31, 2020 7:33 pm
- Forum: Silencersmithing Forum
- Topic: Offfering Mmachining Services
- Replies: 6
- Views: 3282
Re: Offfering Mmachining Services
Perhaps buy a 1/2"x28 - 5/8"x24 tpi adapter from eBay? About $4. Order now and have it by Feb-Mar. https://www.ebay.com/itm/1-2-28-ID-to-5-8-24-OD-Threaded-Adapter-Aluminum-Fuel-Filter-Joint-3-4-19mm/383740970740?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D225074%26meid%3D80...
- Thu Dec 31, 2020 7:11 pm
- Forum: Silencersmithing Forum
- Topic: Baffle Clip Advice requested
- Replies: 9
- Views: 5527
Re: Baffle Clip Advice requested
ok this is based on factory made baffle system user serviceable. not home built my can (9mm) is using 4 baffle (cone) spaced .750" apart... wished it had 8 and baffle spaced closer. this may or may not help for your question it is no where near as effective as the .45 cal can with 8 baffle on s...
- Thu Dec 31, 2020 6:37 pm
- Forum: Silencersmithing Forum
- Topic: Offfering Mmachining Services
- Replies: 6
- Views: 3282
Re: Offfering Mmachining Services
OK 1st post on here and his ad prompted me to actually register... OP I looked up your Signature line and found a phone number hopefully it is correct. Here is my "problem" One of the suppressors I own is a Huntertown Arms Krestel 9 which we all know is outta the Biz and I need a mount mad...