Generally I've seen it done through imgur, which afaik you do not need an account for.
Search found 6 matches
- Fri Feb 05, 2021 10:09 am
- Forum: Silencersmithing Forum
- Topic: K Baffle Vent Jig
- Replies: 31
- Views: 14977
- Fri Feb 05, 2021 7:08 am
- Forum: Silencersmithing Forum
- Topic: K Baffle Vent Jig
- Replies: 31
- Views: 14977
Re: K Baffle Vent Jig
I'm digging up this old thread because I was able to snag the original pictures on google. What caliber did you have this jig made for? I am making a 9mm can once my form comes back and I am hoping to find a jig to do the vent holes with. The design is great! I'm going to second in asking you to mi...
- Thu Feb 04, 2021 2:51 pm
- Forum: Silencersmithing Forum
- Topic: 9MM Short Suppressor Design
- Replies: 5
- Views: 3263
Re: 9MM Short Suppressor Design
Thank you! I'll search around to find a good example to show them for what is required.
- Thu Feb 04, 2021 8:47 am
- Forum: Silencersmithing Forum
- Topic: 9MM Short Suppressor Design
- Replies: 5
- Views: 3263
Re: 9MM Short Suppressor Design
Thanks! I'll start looking for some K-baffles and doing the math again. I do not have a drill press or other equipment to properly clip K-baffles - if I can clip the 60 degree baffles, would they provide superior suppression to unclipped Ks?
- Mon Feb 01, 2021 2:57 pm
- Forum: Silencersmithing Forum
- Topic: 9MM Short Suppressor Design
- Replies: 5
- Views: 3263
Re: 9MM Short Suppressor Design
Ok so I've been doing a lot of research and have made a (horrid) drawing of my design to try and explain what I'm doing. It looks basically like this: https://imgur.com/a/nGxu5Or I'm sourcing the 6" D-cell titanium tube from from one company, stainless steel cups from another, and then looking ...
- Thu Jan 21, 2021 10:21 am
- Forum: Silencersmithing Forum
- Topic: 9MM Short Suppressor Design
- Replies: 5
- Views: 3263
9MM Short Suppressor Design
Hi all, Posted earlier and deleted after doing more research. Going to be putting together a short 6" D-cell suppressor for my Scorpion Micro. It's as wide as I can accept (1.5" OD) but I wanted to keep it short due to the Scorpion being short. Currently, it is direct thread but I may even...