Dont you see that the cop is one of them?
Do you really think he had Coca cola in his glass?

ND

They are available in france as well.

ND

Hello tgbrowning,

Have you tried to weigh your cases and separate them in different groups?

And see if you obtained diffrent speed reading?

Nico

Hi, I am currently preparing some brass for my 300 whisper. I built the rifle two years ago on a cz action but just starting to play with it last week. The chamber has been cut with a PTG reamer marked 30/221, the dies are reddings and the barrel come from Border barrels in Scotland. Not much of an ...

Hello Variable556, You should contact Border Barrels in Scotland and ask them if they are still selling their P-Max. It was a device that mesure pressure from a rifle by calculating its acceleration during recoil. I have got one of these in France. www.border-barrels.com info@border-barrels.com D-mon

Thank you for your answers.
Davo5o, I had a look at this falcon scopes, how do you rate them compaired to leupold? (I have a leupold on my whisper, and the quality and repeatabiliy of the "click" is hard to beat with them).

Nico

Quote D mon I am also using a New Zealand made silencer with a ratio of 50/50 in my 308 winch and my 300 whisper. They both work well, but for larger bullets like the 44 I think the first design is the best. Am curious if the mentioned system above is PES or some other? Hello Trex, yes, on the 308 ...

Hi,
I am new on this forum.
I have not been through all the precedent posts but I have the following question:
When you are shooting subsonic rounds like 300 whisper from 100 to 200 yards, do you prefer to use the turrets on your scope or the mildot reticle?

Many thanks for the answers.

Nico

Hello, I have used a suppressor on my 44 mag rifle with an aluminium "muzzle brake" wrapped up with brass wire netting in the primary chamber and stainless baffles after that. That was very efficient. i would say that the ratio air/ baffle in the case was 25/75. I am also using a New Zeala...

Here is a Z-Jet Dual on a .308 bolt gun. Just how low can you mount a scope? Cause it would have to be pretty darn low to have the can block the view. http://www.canadiantactical.ca/Images/ZJetDual.jpg Actually the BR Tuote T8 is a larger diameter than the Z-Jet and it doesn't block the view throug...

cherokee wrote:John Tibbetts Suppressed Ruger 77/44

How does yours shoot?

Is it a standard factory barrel or a custom one with a faster twist?

ND

No problemo.
By the way, all the girls are like that (with big boobs) in the street of Tucson?
I may come for a visit then

ND

Would I say it to their faces? No. Would I say it to his face? Yes. I can't stand the french. But the point is moot, because I would never visit that filthy, infested country. :shock: Well Tugnut, I would be more than happy to invite you in my country for a bit of silence shooting, good food eating...

mk23 wrote:

TALEL wrote: This one for Tugnut, from France : "Va te faire enc.... , fils de chien galeux..... !!!!!"
That's all I have to say....

Fait attention au language

Oui car vous etes lu par beaucoup (de francophones)
ND

. . . a ruger 77/44. The accuracy was there with supersonic loads, but in subsonic, accuracy was not so good. But I still have to work a descent load for accuracy. Does anyone shoot a ruger 77/44 with subsonic load in its original barrel and get good results? Did anyone had is barrel changed for a ...

I see. That helps a lot.
So we can get plenty of info on your cans.
That is good.
ND

Oups. Sorry.

It looked alot like a reflex.
By the way, I ear a lot of good things about these Ase ultra. It is sad that they are so expensive.

Are you happy with yours?

ND

Hello Tukka, Nice rifle; I had the same silencer (reflex t8 compact) for a ruger 77/44. The accuracy was there with supersonic loads, but in subsonic, accuracy was not so good, and it was to noisy. I got stopson mounting one of there supressor on it, and now sound reduction is fantastic. At subsonic...

Here is a link for stopson:

http://www.stopsontfm.com/

ND