Need to get an older Marlin lever gun threaded. Have no clue who does this. I know Tornado Tech doesn't do them and they are my 1st choice. Anyone have any recommendations? I also want to shorten the barrel and the feed tube to make it more handy.

He's the one that decided to sell his company. Maybe now they will hire more folks to do repair work and not have 10 week turnaround times. Maybe they won't overcharged for their products. Over $100 for a mount just to attach a suppressor? Rediculous, when it takes $1 in materiel and an hour on the...

Price lowered to $250 shipped

droppin the price.

Bought an FNP45 tactical clone that a friend had done up. Barrel is an EFK. Round count is under 500. I also have a set of tall sights from Ameriglo. They are tall and will clear a can just fine. I have no cans and need the $$$ to buy some tools for a project. Asking $250 shipped for everything. I c...

Bump. So how about that 44mag in the 45 can?

one thing that keeps me away from leupold 1-4/5x scopes is the eye relief. It seems to have about a 1" difference from low to high magnification. On some guns that is ok, on others its a burden and really slows things down. If it wasn't for this, I would say leupold hands down, but I just can't...

What length of gas system are folks running for standard vel. and for subs? Anyone have info on gas port diameter? Anyone run a piston system with the 300blackout?

If you are good with electronics you could build your own shumatch DRO for about $300 + you would need to get and mount some chinese digital scales. This is what I will eventually be doing for my mini lathe. Supposedly they are very good DRO's if you do them up right.

Hi everyone- I'm a newb and I know it's probably been answered a few times here but.. I have been working on an inherited Craftsman lathe. I actually started tinkering with it way back in high school after my old man passed. I used and abused it while learning some of the basics but ended up breaki...

you should also have some water purification/filtration in your set up. If you have rivers/creeks/ponds etc in the area you could cut back on the amount of water you transport in favor of treating water in the field for use. And redundancy is great here as well. Get some of those kill everything tab...

so basically, threading a can for 223 would be ok as long as the wall thickness of the tube is a bit thicker? Its been awhile since I have seriously thought about building a can, and last time I was on here I thought I saw mention of screw together cans being somehow inferior to welded ones in rifle...

I am on the verge of a F1, and have kind of wondered for a while when you should just thread your end caps, and when you should weld. Also, when welding, what kind of weld/technique should be employed? I guess this mainly applies to 223 cans, but what about to pistol cal cans? Can one get away with ...

That is about the ONLY combo machine I've seen that I'd even slightly consider. Even then, though... We've all heard it over and over - "I don't have the SPACE for two machines." Pardon me, that's just bullshit. Move the garden tools a few feet, get rid of those old boxes, MAKE ROOM for t...

http://img518.imageshack.us/img518/4306/image001tt2.jpg http://img101.imageshack.us/img101/5012/hondaenginejv9pw8.jpg http://img517.imageshack.us/img517/5524/picture3dg7.jpg http://img517.imageshack.us/img517/3407/beaverjb3.jpg http://img517.imageshack.us/img517/782/polcz5.jpg http://img101.imagesh...

got off my ass and checked amazon, 60 for the pair. very reasonable, will probably go that route. me and google need to hang out more.

was hoping to a bit pay less than $50. Guess Im a cheap bastid.

was on the receiving end of some hot brass out of a f/a G3, wasn't very pleasant. that crap hurts when it hits you in the neck. BTW i was a good 20ft away. And My PTR throws brass somewhere in the neighbor hood of 30ft or better. If you want to save your brass to reload, I would get one of those gun...

Not sure if this is where it should go, but I am looking to do a Form 1 can or two in the future, and need some reading material to help me with my design. If anyone has these books and wants to sell them for a reasonable price, let me know.

email: willmowlawns4sex [at] hotmail [dot] com

Don't forget the 300.00 to 400.00 of tools that you also need to purchase to help you use the lathe. Calipers, boring bars, thread gauges, drill bits etc. I would plan on 1-2X what you paid for the lathe in tooling & acessories +1 lathes are cheap compared to the amount of tools needed to use t...

<--waiting for the clones to hit the market

I got the 8x12/14 from HF and its not a bad little machine. But it REALLY gets old having to cut down stock for pieces larger than the spindle bore. If I had the $$$ I would get a lathe with more power, a better QCTP, and at least a 1.5" through spindle, 2" if i could find one. However the...

Conqueror wrote:http://www.adamchance.com/funny.htm

#2 in particular

Holy crap that was some funny, al beit crass, stuff.

well thats kind of a bummer. I was looking forward to trying a suppressor out on this gun, but guess I will just save it for another gun.

Just picked up a previously loved PTR-91, and am a total noob on HK's and clones. I am thinking about trying to save for a suppressor this summer for it. Would this be an alright platform to suppress? I am pretty sure that it will be, but just not 100% sure and couldn't find much via the google. Is ...