Search found 2418 matches
- Thu Dec 04, 2014 9:56 pm
- Forum: Silencersmithing Forum
- Topic: 50 BMG form 1 finally arrived. Tested, works well.
- Replies: 46
- Views: 14882
Re: 50 BMG form 1 finally arrived. Making progress.
Thanks for the update. I hope you find the design you like. My baffles are as simple as you can get and worked fine. So don't over think it. redtazdog_ aren't you making one? I have ten form 1 stamps in hand and yes one of them is for a 50 that will be 16" length, 2.5 OD, still deciding what k...
- Wed Dec 03, 2014 7:47 pm
- Forum: Silencersmithing Forum
- Topic: 50 BMG form 1 finally arrived. Tested, works well.
- Replies: 46
- Views: 14882
Re: 50 BMG form 1 finally arrived. Making progress.
I heard a rumor he used 3 inch tube at 20 inch length just to have the king in size over your monsterjimmym40a2 wrote:Ranb how is this going?
- Thu Aug 21, 2014 11:25 pm
- Forum: Silencersmithing Forum
- Topic: Homeade heavy buffer
- Replies: 9
- Views: 2198
Re: Homeade heavy buffer
It would be heavy and cost more than a enough stainless round stock to make a dozen buffersLavaRed wrote:What would happen if one were to machine a buffer out of solid pure (~97%) tungsten?
- Thu Aug 21, 2014 10:35 pm
- Forum: Silencersmithing Forum
- Topic: Homeade heavy buffer
- Replies: 9
- Views: 2198
Re: Homeade heavy buffer
been making custom buffers for many years, some for pistol calibers and some for rifle, some heavy some light and some that can be tuned easy. If you use tungsten powder the noise like the solid weights slapping around is gone. http://i197.photobucket.com/albums/aa166/redtazdog/DSCN2515w.jpg http://...
- Thu Aug 21, 2014 10:08 pm
- Forum: Silencersmithing Forum
- Topic: 50 BMG form 1 finally arrived. Tested, works well.
- Replies: 46
- Views: 14882
Re: 50 BMG form 1 finally arrived. Making progress.
How many baffles did you decide to use and how does it sound ?
- Tue Jul 29, 2014 10:59 pm
- Forum: Silencersmithing Forum
- Topic: AR15 SBR Short stroking, help needed.
- Replies: 14
- Views: 3320
Re: AR15 SBR Short stroking, help needed.
What buffer are you using ? The heavier H2 buffer will hold the bolt closed longer and allow the brass to shrink back down in size so it will extract easier, faster and stronger. A buffer that too light will allow the bolt to unlock sooner when the pressure in the brass is still high causing the bra...
- Tue Jul 15, 2014 10:51 pm
- Forum: Rifle Discussion
- Topic: Integral 308 - Dark Horse Arms
- Replies: 12
- Views: 6830
Re: Integral 308 - Dark Horse Arms
Why subsonic 308 when you can go with 300 BO for subsonic 30 cal fun,
I don't see on the website what the integral is made of and if full power ammo can be used without damage.
A 700 action in 300 BO and a custom integral I would think could be built for very much less than that price tag.
I don't see on the website what the integral is made of and if full power ammo can be used without damage.
A 700 action in 300 BO and a custom integral I would think could be built for very much less than that price tag.
- Tue Jul 15, 2014 10:34 pm
- Forum: Silencer Talk
- Topic: Advice sought on when checks should be cashed
- Replies: 4
- Views: 950
Re: Advice sought on when checks should be cashed
All of my checks have been cashed within two weeks or less but my brother had a check cashed at 10 weeks and three weeks later he had the stamp in hand.
Funny thing is we both mailed in the forms the same day and he still got his stamp a week before me
even though his check cashed so much later.
Funny thing is we both mailed in the forms the same day and he still got his stamp a week before me
even though his check cashed so much later.
- Mon Jul 14, 2014 8:57 pm
- Forum: Silencer Talk
- Topic: Whitehouse.gov petition to remove silencers from the nfa.
- Replies: 47
- Views: 6996
Re: Whitehouse.gov petition to remove silencers from the nfa
And if it did soon after they would get banned, careful what you wish forsgtmajor wrote:This really needs to happen.
- Sat Jul 12, 2014 12:28 am
- Forum: Silencer Talk
- Topic: Whitehouse.gov petition to remove silencers from the nfa.
- Replies: 47
- Views: 6996
Re: Whitehouse.gov petition to remove silencers from the nfa
If this petition does work then great! as I think there should be no such thing as the nfa But if it awakes the sleeping bear and you loose then you have nobody to blame but yourself. Like I said, if you have NFA items its too late to be under the radar so having some that are not on the books wont ...
- Fri Jul 11, 2014 11:55 pm
- Forum: Silencer Talk
- Topic: Whitehouse.gov petition to remove silencers from the nfa.
- Replies: 47
- Views: 6996
Re: Whitehouse.gov petition to remove silencers from the nfa
If they raise the tax they are not taking away our freedom to have nfa items, they would be pricing the average person out of the game. Back in the early 1990's I used to see silencer tubes and end caps on gun show tables on the east side of the building and baffles on the west side. This went on fo...
- Thu Jul 10, 2014 11:01 pm
- Forum: Silencersmithing Forum
- Topic: How do MuzzleBrakes affect suppressor function and dB levels
- Replies: 10
- Views: 1864
Re: How do MuzzleBrakes affect suppressor function and dB le
I have fixt a few of my guns that had poi shift with vs without the can. These barrels didn't cause any end cap or baffle strikes so the threads on them may have been close to concentric but just not enough for me. After chopping of the factory barrel threads and re threading concentric to the bore ...
- Thu Jul 10, 2014 10:44 pm
- Forum: Silencer Talk
- Topic: Lightweight suppressor for a Grendel build...
- Replies: 11
- Views: 2983
Re: Lightweight suppressor for a Grendel build...
A 6.5 gren with that short of barrel is like having a 4 banger engine in a new Vette
- Thu Jul 10, 2014 10:25 pm
- Forum: Silencer Talk
- Topic: Whitehouse.gov petition to remove silencers from the nfa.
- Replies: 47
- Views: 6996
Re: Whitehouse.gov petition to remove silencers from the nfa
I like it the way it is :twisted: + if we bitch too much it may be a wake up call and then the price of a tax stamp of 1934 prices may inflate to 2014 price or some change that could take us out of the game. If you have one NFA item its too late to stay low so even if they did remove silencers from...
- Thu Jul 10, 2014 9:43 pm
- Forum: Silencer Talk
- Topic: Whitehouse.gov petition to remove silencers from the nfa.
- Replies: 47
- Views: 6996
Re: Whitehouse.gov petition to remove silencers from the nfa
I like it the way it is :twisted: + if we bitch too much it may be a wake up call and then the price of a tax stamp of 1934 prices may inflate to 2014 price or some change that could take us out of the game. If you have one NFA item its too late to stay low so even if they did remove silencers from ...
- Mon Jul 07, 2014 10:59 pm
- Forum: Silencer Talk
- Topic: 1:16 twist for 9mm subs?
- Replies: 3
- Views: 702
Re: 1:16 twist for 9mm subs?
A 1:10 twist is better for the heavy sub ammo if you can find one.
- Thu Jun 26, 2014 10:36 pm
- Forum: Silencer Talk
- Topic: Help me find and choose a 6" (!!!) 300blk barrel - Updated
- Replies: 14
- Views: 6663
Re: Help me find and choose a 6" (!!!) 300blk barrel - Updat
Bender - Yeah, they want $400 but will guarantee stability using 187 and 220 grain projectiles. what twist? 1:4???? Good luck getting it to cycle at 6" . . . I guess if you only shoot suppressed you stand a chance. I have cut many AR 300 barrels down to 6.5" and tuned them to run good wit...
- Sat Jun 14, 2014 6:56 pm
- Forum: Silencersmithing Forum
- Topic: Dimples
- Replies: 8
- Views: 2630
- Fri May 16, 2014 12:30 am
- Forum: Silencer Talk
- Topic: End cap stuck in TacSol AR-22 SB-X upper?
- Replies: 6
- Views: 2402
Re: End cap stuck in TacSol AR-22 SB-X upper?
I have a couple Tacsol SBX barrels and a few of my own style SBX barrels and never lost the end cap on the barrel.
If you put the end caps on the can with a tool instead of hand tight you shouldn't have that problem.
If you put the end caps on the can with a tool instead of hand tight you shouldn't have that problem.
- Tue May 13, 2014 10:18 pm
- Forum: Silencersmithing Forum
- Topic: Handguard ID question
- Replies: 6
- Views: 1559
Re: Handguard ID question
I'm looking at a couple of handguards that have an ID of 1.56" that I would like to put a 1.5" can under. I would like to keep the handguard as skinny as possible for a sleek look and lighter weight but I don't want it rubbing. Is this too close of a fit or will it work? It will work if t...
- Mon May 12, 2014 7:28 am
- Forum: Silencer Talk
- Topic: 9mm 158gr subs in stock
- Replies: 5
- Views: 1714
Re: 9mm 158gr subs in stock
They must have found more as its up to 47 boxes nowQuIet Noob wrote:Down to 11 now.
- Sun May 11, 2014 12:47 am
- Forum: Silencer Talk
- Topic: 9mm 158gr subs in stock
- Replies: 5
- Views: 1714
Re: 9mm 158gr subs in stock
Most of the time I reload but sometimes I feel lazy and buy loaded ammo for times I don't have the time.
Thanks for the sale tip as I just purchased 4000 rnds to sit on until needed.
Thanks for the sale tip as I just purchased 4000 rnds to sit on until needed.
- Fri May 09, 2014 12:54 pm
- Forum: Silencersmithing Forum
- Topic: Please critique my 300BLK design
- Replies: 34
- Views: 5953
Re: Please critique my 300BLK design
How long is the barrel itself ?
I'm thinking more like a7 inch barrel with less reflex area and more baffles up front would suppress better.
I'm thinking more like a7 inch barrel with less reflex area and more baffles up front would suppress better.
- Thu May 08, 2014 2:29 pm
- Forum: Silencer Talk
- Topic: Contender --Anyone use one---
- Replies: 25
- Views: 12229
Re: Contender --Anyone use one---
I must feel the need for a lot of therapyrancilio wrote:Spending is harsh. Doesn 't that imply getting nothing in return. Paying for smiles and giggles is therapy.strobro32 wrote:Why... Why do you people FORCE me to spend my hard earned $?
- Wed May 07, 2014 11:25 pm
- Forum: Silencer Talk
- Topic: Contender --Anyone use one---
- Replies: 25
- Views: 12229
Re: Contender --Anyone use one---
The TC's suppress so good I have them in many calibers
Integral suppressed 44 mag
integral suppressed 22 Lr
357 mag
223
6.5mm
375 H&H
22-250
300 whisper/blackout
510 Whisper
Integral suppressed 44 mag
integral suppressed 22 Lr
357 mag
223
6.5mm
375 H&H
22-250
300 whisper/blackout
510 Whisper