Search found 353 matches
- Sat Jan 13, 2018 7:55 pm
- Forum: AAC
- Topic: Flash hider for M4-1000?
- Replies: 1
- Views: 3089
Re: Flash hider for M4-1000?
I ran across this looking for a similar answer for the 07 M42000. It is an 18 tooth flash hider. They are a little pricy and a little harder to find but that is what you need.
- Mon Apr 22, 2013 6:37 pm
- Forum: Silencer Talk
- Topic: Sig 226 22lr threading the barrel.
- Replies: 10
- Views: 1697
Re: Sig 226 22lr threading the barrel.
Yeh, and they require some fitting. Not too big of a deal but if I pay $150 for a plinking barrel I want it to work. It is also out of stock. All in all I didnt shoot the kit much because it is nothing special. Seemed cheap compared to my MK3 that I use suppressed. The last round slide catch lever d...
- Sun Apr 21, 2013 9:24 pm
- Forum: Silencer Talk
- Topic: Sig 226 22lr threading the barrel.
- Replies: 10
- Views: 1697
Re: Sig 226 22lr threading the barrel.
I thought it would be like a Musquito, P22, or M&P 45 but it looks like this barrel is solid stainless steel. There is no thread cover on the end. I can probably post picture tomorrow to better illustrate. This barrel looks solid.
- Sun Apr 21, 2013 9:21 pm
- Forum: Silencer Talk
- Topic: S&W M&P9 factory barrel in a M&P9 compact.
- Replies: 20
- Views: 3170
Re: S&W M&P9 factory barrel in a M&P9 compact.
Just FYI I have both a M&P 9mm and a M&Pc 9mm barrel. There appears to be a small increase in OD in the area where slide meets the barrel. Besides that there is no difference. Looking at them it is very slight. Almost the diameter of electrical tape. My advice to you if you if you use it wou...
- Sun Apr 21, 2013 2:27 pm
- Forum: Silencer Talk
- Topic: Sig 226 22lr threading the barrel.
- Replies: 10
- Views: 1697
Sig 226 22lr threading the barrel.
Well, I got a 226 22 a few years ago. I mainly got it for the aluminum lower with beavertail to use with my 40 upper that use to go on a heavy ST lower. Anyway, I only fired the upper once until now and really want to put my tac 65 on there. I found on another thread that these have threads on them ...
- Thu Aug 30, 2012 11:48 am
- Forum: Silencer Talk
- Topic: ATF continued.......
- Replies: 3373
- Views: 443332
Re: ATF continued.......
It use to be 2 months. Why does it take 6 months to run a criminal history check and sign a piece of paper?
- Mon Jul 16, 2012 11:55 pm
- Forum: Rifle Discussion
- Topic: 2 mile shooting -3500 yards.
- Replies: 24
- Views: 9414
Re: 2 mile shooting -3500 yards.
I followed your form 1 thread and finally got a 50. Since then I have been considering building one myself. The only thing stopping me was the question of if API ammo was safe to fire through it. Looks like you have no problems at all. Now that I think about it I dont think an API baffle strike woul...
- Mon Mar 12, 2012 4:45 pm
- Forum: Silencersmithing Forum
- Topic: How's the HF 7x10 lathe?
- Replies: 41
- Views: 7066
Re: How's the HF 7x10 lathe?
My above being said I did make several useful brakes and a side charging handle for my AK which pretty much saved me money equal or greater than I paid for the lathe.
- Mon Mar 12, 2012 4:43 pm
- Forum: Silencersmithing Forum
- Topic: messing with autodesk inventor
- Replies: 18
- Views: 3129
Re: messing with autodesk inventor
That is awesome thanks for the info. Wasnt trying to hijack but I saw the student copy option and was excited. My wife has been doing autocad work since 2005 for several different places. She has a degree in interior design but has been taking continued education classes at a local community college...
- Mon Mar 12, 2012 12:02 pm
- Forum: Silencersmithing Forum
- Topic: How's the HF 7x10 lathe?
- Replies: 41
- Views: 7066
Re: How's the HF 7x10 lathe?
I bought a 7x10 a year ago and it is handy but that is it. I wish I had a bigger one to learn on. I build little muzzle devices on mine but it is a pain. The tool post handle snapped off almost right away. I considered CNCing the thing to make 50bmg bullets out of copper grounding rods. Then I decid...
- Mon Mar 12, 2012 11:56 am
- Forum: Silencersmithing Forum
- Topic: messing with autodesk inventor
- Replies: 18
- Views: 3129
Re: messing with autodesk inventor
Stupid question bc I am new to CNC stuff but looking at this is there a way to import this into gcode or something to run in mach 3? I am looking to order a grizzly x3 type mill and CNC it like right away. This program looks really cool.
- Sun Feb 26, 2012 11:15 am
- Forum: Silencersmithing Forum
- Topic: 5.5" Noveske KX3 = suppressor?
- Replies: 22
- Views: 9371
Re: 5.5" Noveske KX3 = suppressor?
It is important to note that the bulgi 4 part has two holes drilled in the expantion / blast chamber. I did a similar thing when building a solid krink type break. I took a solid length of stainless, threaded one end, and made a cone in the other. I cut the id for the threads a little further than I...
- Thu Jan 05, 2012 11:35 am
- Forum: Silencer Talk
- Topic: BATFE/Sheriffs Department Fail!!
- Replies: 21
- Views: 2624
Re: BATFE/Sheriffs Department Fail!!
I can almost guarantee that while it may have been perceived to have happened as described, the actual events were far from what was presented. Had this actually happened (cuffed and face down) because several law enforcement officers "thought" illegally surpressed weapons were being fire...
- Thu Jan 05, 2012 11:27 am
- Forum: Silencer Talk
- Topic: B&T TP9 - Suppressed use, mags, impulse, and general inf
- Replies: 96
- Views: 26258
Re: B&T TP9 - Suppressed use, mags, impulse, and general inf
I have been watching this thread because I was considering building a MP5k clone but then saw some good deals on BT9s. I understand the hangup is getting the adapter for the SWR cans. Also, anyone fire both and find the MP5k any quieter because of the delayed action?
- Mon Dec 26, 2011 10:45 pm
- Forum: Silencer Talk
- Topic: Pending times.....w/ Examiner Jason Frushour
- Replies: 21
- Views: 2966
Re: Pending times.....w/ Examiner Jason Frushour
Wow, I havnt gotten any of this stuff since 2006 and then the door to door time was somewhere between 3 to 6 weeks. What is the deal all of a sudden. How hard is it to pick up the stamp and stick it on the paper. What type of examining is needed for a trust? There is no background check? Hope this i...
- Sun Dec 25, 2011 8:30 pm
- Forum: Silencersmithing Forum
- Topic: How bad is it to become a manufacture
- Replies: 58
- Views: 26397
Re: How bad is it to become a manufacture
On the note of the NFA ignorance act as I call it passed by many states, it should not be a problem. The only case law that I have ever heard of that says otherwise is the Smith case involving marijuana. In that case I see a bid difference since it was not legal in that case to grow marijuana and se...
- Sun Dec 25, 2011 12:57 pm
- Forum: Silencersmithing Forum
- Topic: How bad is it to become a manufacture
- Replies: 58
- Views: 26397
Re: How bad is it to become a manufacture
Hmm, then it sounds that unless I am going to be selling the designs that I am better off just to pay the tax each time and enjoy the fact that I can possibly make a $600-$900 before tax can for like $30 plus labor and $200 tax. I guess there is nothing to say that if I land a good design that I sti...
- Sat Dec 24, 2011 12:35 pm
- Forum: Silencersmithing Forum
- Topic: How bad is it to become a manufacture
- Replies: 58
- Views: 26397
Re: How bad is it to become a manufacture
I have been doing a little research since I posted this thread last year. I have been working on getting a garage and shop built and have considered a license for R&D purposes. When I ran across this today http://www.pmddtc.state.gov/regulations_laws/documents/official_itar/ITAR_Part_122.pdf und...
- Thu Dec 22, 2011 12:05 pm
- Forum: Silencer Talk
- Topic: Is this just someone talking s--t on AAC.
- Replies: 50
- Views: 7038
Re: Is this just someone talking s--t on AAC.
The talk on Ar15 was that his Kevin's wife was fired first. Ouch. That's a tough one to come home to every night, I can definitely see how that could snowball at home. Maybe that was a first step in saving themselves 8 million? I wrote that. I heard it over a year ago so the two incidents are very ...
- Mon Dec 12, 2011 11:10 am
- Forum: Silencer Talk
- Topic: Thompson Machine SG
- Replies: 18
- Views: 2663
Re: Thompson Machine SG
Ever since the ITT thing I think everyone is careful when it comes to ITAR.
- Tue Dec 06, 2011 9:14 pm
- Forum: Silencer Reviews
- Topic: shootersdepot carbon fiber cans -- anyone tried these?
- Replies: 516
- Views: 96203
Re: shootersdepot carbon fiber cans -- anyone tried these?
I hate to say this but after reading about all these problems with this place, has anyone thought to contact the ATF on this place. I know most people dont like them but if they are conducting a shotty business with an NFA license maybe that needs to be reevaluated. Just sayin.
- Tue Nov 08, 2011 1:29 am
- Forum: Rifle Discussion
- Topic: Are you happy with your PS90
- Replies: 59
- Views: 18482
Re: Are you happy with your PS90
Does AAC make a adapter that fits 21 tooth M42000(old)/M41000 ? I got screwed by CMMG and they say that their adapter will no longer support suppressors and they will not offer a replacement.
- Thu Oct 06, 2011 10:52 am
- Forum: Silencersmithing Forum
- Topic: Can machining a 5.56 can to 308 be done safely
- Replies: 30
- Views: 3201
Re: Can machining a 5.56 can to 308 be done safely
Wow, good to see you asked a question and they got all up in your legal business.
- Thu Sep 15, 2011 12:40 am
- Forum: Photos and Videos
- Topic: Video powder coating a Draco
- Replies: 6
- Views: 1885
Re: Video powder coating a Draco
Well i threw it in the closet (litterally) before going on a vacation to Myrtle Beach last week. The week before I had it sloshing around in my trunk because I was gona try and shoot it when I went to go take a shower during the hurricane and forgot. It seems fine for that. I keep playing with the s...
- Wed Sep 14, 2011 11:17 am
- Forum: Silencer Talk
- Topic: How do I create a will so my NFA item stays in familly?
- Replies: 22
- Views: 3056
Re: How do I create a will so my NFA item stays in familly?
If I have some of my stuff in a corp, am president and only officer of the corp, and I stop paying the yearly corp fee can I form 5 the stuff to myself since the corp is dead? I know stupid question but the ATF couldnt tell me what happens to my stuff if I dont pay my fee and get my license to condu...