I would have a hard time cleaning a 22lr can if both ends didn't come off.
Sometimes I have to tap out the baffles with a wood dowel after too many rounds.
If you are set on securing the mount end, try JB Weld or you could side drill it and pin it.
Search found 420 matches
- Tue Jun 26, 2012 8:37 pm
- Forum: Silencersmithing Forum
- Topic: Thoughts on adhesive for 22 suppresors
- Replies: 26
- Views: 4374
- Mon Jun 25, 2012 3:11 pm
- Forum: Silencersmithing Forum
- Topic: should i thread a suppressor or weld it to the barrel?
- Replies: 19
- Views: 3179
Re: should i thread a suppressor or weld it to the barrel?
I see nothing but problems with using that "tool"....best to have your barrel threaded on a lathe.alemonkey wrote:Look on eBay, you can buy a die for threading 10/22 barrels with a guide that keeps it concentric to the bore.
- Mon Jun 25, 2012 3:05 pm
- Forum: Silencer Talk
- Topic: Best railed .22LR pistol host?
- Replies: 25
- Views: 2313
Re: Best railed .22LR pistol host?
I just bought one.......you don't have to do a thing to it...it has a threaded barrel and thread protector, top rail and bottom rail.....SWEET.Abiqua wrote:Ruger 22/45 with rail. Do a trigger upgrade to VQ.
- Sun Jun 24, 2012 8:42 am
- Forum: Silencer Talk
- Topic: Suppressing S&W M&P15Psx(adam arms) and Colt SP6940P rifles
- Replies: 7
- Views: 1215
Re: Suppressing S&W M&P15Psx(adam arms) and Colt SP6940P rif
What are the other two ARs on the background are they piston or DI? I can see the LMT on the foreground. The (2) with Halo suppressors are both LMT MRP 12" Piston SBR's, both set up the same except the middle weapon has ladder covers as I sometimes put a rail mounted M203 launcher on it. The o...
- Sat Jun 23, 2012 7:18 pm
- Forum: Silencer Talk
- Topic: Suppressing S&W M&P15Psx(adam arms) and Colt SP6940P rifles
- Replies: 7
- Views: 1215
Re: Suppressing S&W M&P15Psx(adam arms) and Colt SP6940P rif
I've had no problems suppressing my piston M4's. They are 12" MRP's with Gemtech Halos. Hearing safe w/o ear protection?.....outside, YES.....inside, NO Staying with a 16" you will not have any of the problems that sometimes occur with shorter barrels, suppressed or unsuppressed. Piston ri...
- Sat Jun 23, 2012 6:13 pm
- Forum: Silencer Talk
- Topic: Cut'n down a Ruger MKII, what length?
- Replies: 22
- Views: 4583
Re: Cut'n down a Ruger MKII, what length?
Emilio......Is there an integral suppressed upper for that lower in the future??
- Sat Jun 23, 2012 5:19 pm
- Forum: Silencersmithing Forum
- Topic: My 9mm Form 1 with booster
- Replies: 30
- Views: 18592
Re: My 9mm Form 1 with booster
The suppressor now has over 500 rounds and functions flawlessly on the G19. Threads look great and no visible damage to the lockup areas of the slide or barrel. I had a chance to accurately measure the spring strength in my factory cans and I did not use the spring in the original post, I decided to...
- Sat Jun 23, 2012 5:01 pm
- Forum: Silencer Talk
- Topic: The M50 Madsen
- Replies: 12
- Views: 1400
Re: The M50 Madsen
Can't believe I missed this thread. :shock: I owned a few Madsens.....Most of them were thrown in on the deal as the seller wanted to get rid of them. We shot the Sh*t out of them....I'm trying to remember who I sold them too. Trivia......Best Movie with Madsen SMG's........something in the Matt Hel...
- Thu Jun 21, 2012 10:02 pm
- Forum: NFA Weapons
- Topic: 10.5, or 12.5, brake or hider?
- Replies: 15
- Views: 2283
Re: 10.5, or 12.5, brake or hider?
That's one way to practice a "reach around"
- Thu Jun 21, 2012 9:53 pm
- Forum: Silencersmithing Forum
- Topic: Starting With a Barrel Blank
- Replies: 6
- Views: 1428
Re: Starting With a Barrel Blank
yeh right $4K and over a year wait, but I made a call and had one shipped overnight :lol: Fatso really booger'd up the threads on that barrel......I laughed my ass off :lol: :lol: :lol: :lol: I wonder what the customers think about these mistakes when watching the show for the first time with their ...
- Thu Jun 21, 2012 9:36 pm
- Forum: Silencersmithing Forum
- Topic: Booster question
- Replies: 2
- Views: 817
Re: Booster question
I posted a thread on my 9mm build with a booster. http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79673 I had some insight as I already own a couple factory cans with boosters. I changed the setup on that 9mm build and went with a 3 point contact piston. I was not concerned about venting ...
- Wed Jun 20, 2012 12:59 pm
- Forum: Silencersmithing Forum
- Topic: Question on 3 jaw chuck
- Replies: 18
- Views: 3264
Re: Question on 3 jaw chuck
First accessory I bought for my lathe was a 4 jaw chuck. Never considered putting the 3 jaw back on. For re-centering a part, check out the thread on making your own roller bearing tool to square up part in lathe chuck http://www.silencertalk.com/forum/viewtopic.php?f=2&t=88770 I made one and it...
- Mon Jun 18, 2012 8:06 am
- Forum: Silencersmithing Forum
- Topic: Tramming Mill or Lathe
- Replies: 11
- Views: 4135
Re: Tramming Mill or Lathe
Historian....that guy is amazing.
He still has all his fingers and toes.
He still has all his fingers and toes.
- Mon Jun 18, 2012 7:47 am
- Forum: NFA Weapons
- Topic: MK760 coming out of "gun jail" tomorrow (pic)
- Replies: 8
- Views: 1732
Re: MK760 coming out of "gun jail" tomorrow (pic)
I had a MK-760 from Southern Machine Tool & Die and a matching SG-9 suppressor from them too.
It was really quiet.... Just bolt noise.
It's also fun watching 70's TV shows and movies when the bad guys pull out 76's.
Enjoy.
It was really quiet.... Just bolt noise.
It's also fun watching 70's TV shows and movies when the bad guys pull out 76's.
Enjoy.
- Sat Jun 16, 2012 10:38 am
- Forum: Silencersmithing Forum
- Topic: should i thread a suppressor or weld it to the barrel?
- Replies: 19
- Views: 3179
Re: should i thread a suppressor or weld it to the barrel?
I don’t have the ability to thread a suppressor to a barrel. i only have the option of welding to the barrel and my main question is will that affect the quality of the silencer in a noise aspect? (First build) This is the silencersmithing section. I'm sure there are a few here that would like to r...
- Sat Jun 16, 2012 10:25 am
- Forum: Silencer Talk
- Topic: Recommend a .22 LR host (pistol)
- Replies: 21
- Views: 2242
Re: Recommend a .22 LR host (pistol)
Once you have striped one down, they'll seem easy.wacki wrote:I would go Ruger but they are apparently a pain to clean.
There are a few decent Youtube videos on breaking down the Ruger MK's
- Thu Jun 14, 2012 9:53 pm
- Forum: Silencersmithing Forum
- Topic: Cutting threads
- Replies: 28
- Views: 11003
Re: Cutting threads
To be honest.....I learn a lot from Youtube videos.
- Thu Jun 14, 2012 9:44 pm
- Forum: Silencer Talk
- Topic: The Walther should come with a face mask.
- Replies: 37
- Views: 5237
Re: The Walther should come with a face mask.
Always wear safety glasses
- Thu Jun 14, 2012 1:06 pm
- Forum: Silencer Talk
- Topic: chevrolet suppressor baffles your opinion
- Replies: 12
- Views: 3016
Re: chevrolet suppressor baffles your opinion
"That" will definitely get you noticed.1mobum wrote: WTF is that ^^
- Thu Jun 14, 2012 12:59 pm
- Forum: Silencer Talk
- Topic: Newbie here with Form 1 questions.
- Replies: 17
- Views: 1546
Re: Newbie here with Form 1 questions.
No drawings need to be submitted.
In reality every form 1 project is a prototype.
In reality every form 1 project is a prototype.
- Thu Jun 14, 2012 8:19 am
- Forum: Silencer Talk
- Topic: Dumb threading question
- Replies: 3
- Views: 663
Re: Dumb threading question
I agree with Whisper, but more to the point........YES.
- Thu Jun 14, 2012 8:11 am
- Forum: Silencer Talk
- Topic: Double barrel AR15
- Replies: 6
- Views: 1063
Re: Double barrel AR15
From the details, it looks as if the 'semi-automatic' version would be classified as a machine gun by the ATF as it fires two rounds simultaneously with a single pull of the trigger. It is not that both barrels can fire simultaneously that would get the ATF's attention, it is that they can be autom...
- Thu Jun 14, 2012 7:47 am
- Forum: Silencer Talk
- Topic: Need help finding a 3/8-24 thread protector.
- Replies: 6
- Views: 1502
Re: Need help finding a 3/8-24 thread protector.
The easy way out would be to tap a scrap of rod and turn down to your profile.
I did a quick search on a 3/8 24 Tap and found a few for about $4 shipped.
I did a quick search on a 3/8 24 Tap and found a few for about $4 shipped.
- Wed Jun 13, 2012 4:42 pm
- Forum: NFA Weapons
- Topic: SBR Lower Process??
- Replies: 16
- Views: 3143
Re: SBR Lower Process??
Correct.
It is best to store your SBR upper at another location (friends home) until your approved paperwork arrives.
That keeps you from clicking it together and illegally fondling it.
It is best to store your SBR upper at another location (friends home) until your approved paperwork arrives.
That keeps you from clicking it together and illegally fondling it.
- Wed Jun 13, 2012 4:22 pm
- Forum: Silencersmithing Forum
- Topic: Bad surface finish
- Replies: 60
- Views: 12912
Re: Bad surface finish
Remember those step up shocking coils we made in High School shop class.
Hook up a 9v battery and torture anybody dumb enough to touch it.
Hook up a 9v battery and torture anybody dumb enough to touch it.